15 February 2024 in Physical Chemistry Chemical Physics
The transport of H2O2 and OH from an atmospheric pressure plasma jet to a liquid sample are investigated using multiple detection techniques and a plasma-chemical global model. Scaling and formation pathways species are presented and discussed.
10 February 2025 in Journal of Physics D: Applied Physics
The transportation of plasma-generated species through a liquid environment is a key step within the plasma-driven biocatalysis process, but is also of great importance for other systems with plasma–liquid interfaces. The aim of this study is to explore the transportation processes and lifetime of plasma-generated species in an aqueous solution. Therefore, a combination of experimental methods, reactive molecular dynamics (MD) simulations, and reaction–diffusion modelling was used. Experimentally, an atmospheric pressure plasma jet was used to treat an aqueous sample. Convective transport was visualized by particle image velocimetry in the plasma-treated water. Chemiluminescence measurements of OH were conducted by the use of luminol and 2D-UV-absorption spectroscopy was used to detect H2O2 in the plasma-treated water. The strength of convective transport was found to decrease with the gas flow rate through the jet, and at low gas flows, an effective diffusion coefficient for H2O2 could be calculated. OH was mainly present at the liquid surface under all treatments investigated. The reactive MD simulations form the basic model of an ideal system, where all transportation is purely diffusion-driven, and molecular diffusion coefficients can be calculated. The results of the MD simulations were compared with the experimental studies to gain a deeper understanding of the differences between the ideal and the real system. To bridge the gap between the time scales of the MD simulations and the experiments, a kinetic model was used to understand the spatio-temporal changes and the influence of transport mechanisms and reaction chemistry. For low flow rate cases good agreement between experimental measurements and kinetic modelling could be obtained when the experimentally measured effective diffusion coefficient was used as input to the model. The differences in the H2O2 concentration profiles in the liquid when using the molecular diffusion coefficient derived from MD and the effective diffusion coefficient from the experimental measurements are highlighted.
21 August 2025 in Journal of Physics D: Applied Physics
Plasma liquid interactions are important for a range of applications. For these, H2O2 and OH represent two key reactive species, whose concentrations in liquids need to be controlled for effective application outcomes. Here, a combination of gas and liquid simulations is used to study the concentration profiles of H2O2 and OH in water treated by a radio-frequency-driven plasma jet, with a glass capillary between the electrodes, operated in He with admixtures of water vapour. Simulations are compared with measured H2O2 concentrations and found to be in good qualitative agreement as plasma power and water admixture are varied. Simulation results show that the concentration profiles of H2O2 in the liquid are mainly determined by transport, while those of OH are limited by reactions with H2O2, which consumes OH. For a given plasma operating condition, the concentration and penetration depth of H2O2 increase with plasma treatment time, while those of OH tend to decrease because of the increasing H2O2 concentration. Plasma power, water vapour admixture, and the distance between the jet and the liquid surface all allow for the concentrations of H2O2 and OH to be controlled. The OH delivered from the gas phase to the liquid, and its concentration within the liquid are strongly dependent on the reaction pathways occurring in the effluent region, such that the trends in OH density at the end of the plasma region differ from those in the liquid. While the concentration of OH in the liquid is always much lower than that of H2O2, the ratio of the two species can be controlled over orders of magnitude by varying water admixture and power. The highest selectivity to OH is at low water admixtures, low powers and short treatment times, while the highest selectivity to H2O2 is at high water admixtures, high powers and long treatment times.