1 May 2019 in Optics Express
In this work, the size-dependent effect for InGaN/GaN-based blue micro-light emitting diodes (µLEDs) is numerically investigated. Our results show that the external quantum efficiency (EQE) and the optical power density drop drastically as the device size decreases when sidewall defects are induced. The observations are owing to the higher surface-to-volume ratio for small µLEDs, which makes the Shockley-Read-Hall (SRH) non-radiative recombination at the sidewall defects not negligible. The sidewall defects also severely affect the injection capability for electrons and holes, such that the electrons and holes are captured by sidewall defects for the SRH recombination. Thus, the poor carrier injection shall be deemed as a challenge for achieving high-brightness µLEDs. Our studies also indicate that the sidewall defects form current leakage channels, and this is reflected by the current density-voltage characteristics. However, the improved current spreading effect can be obtained when the chip size decreases. The better current spreading effect takes account for the reduced forward voltage.
1 May 2019 in Optics Express
For the [0001] oriented AlGaN-based deep ultraviolet light-emitting diodes (DUV LEDs), the holes in the p-type electron blocking layer (p-EBL) are depleted due to the polarization induced positive sheet charges at the last quantum barrier (LQB)/p-EBL interface. The hole depletion effect significantly reduces the hole injection capability across the p-EBL. In this work, we propose inserting a thin AlN layer between the LQB and the p-EBL, which can generate the hole accumulation at the AlN/p-EBL interface. Meanwhile, the holes can obtain the energy when traveling from the p-EBL into the multiple quantum wells (MQWs) by intraband tunneling through the thin AlN layer. As a result, the hole injection and the external quantum efficiency (EQE) have been remarkably enhanced. Moreover, we point out that the thick AlN insertion layer can further generate the hole accumulation in the p-EBL and increase the hole energy which helps to increase the hole injection. We also prove that the intraband tunneling for holes across the thick AlN insertion layer is facilitated by using the optimized structure.
29 January 2021 in Journal of Physics D: Applied Physics
GaN-based micro-size light-emitting diode ( μ LED) have emerged as a promising light sources for a wide range of applications in displays, visible light communication etc. In parallel with the two key technological bottlenecks: full-color scheme and mass transfer technique that need overcoming, it is known that the low external quantum efficiency (EQE) is also another challenge for μ LEDs from the perspective of manufacturing technology and device physics. The low EQE for GaN based μ LEDs is opposite to the common belief for GaN-based LEDs, such that GaN based LEDs are featured with high quantum efficiency, mechanically robust and energy saving. Therefore, in this work, we have reviewed the origin for the low EQE for μ LEDs. More importantly, we have also reported the underlying devices physics and proposed optimization strategies to boost the EQE for μ LEDs. Our work is targeted to provide a guideline for the community to develop high-performance GaN-based μ LEDs.
22 March 2019 in Photonics Research
It is well known that the p-type AlGaN electron blocking layer (p-EBL) can block hole injection for deep ultraviolet light-emitting diodes (DUV LEDs). The polarization induced electric field in the p-EBL for [0001] oriented DUV LEDs makes the holes less mobile and thus further decreases the hole injection capability. Fortunately, enhanced hole injection is doable by making holes lose less energy, and this is enabled by a specifically designed p-EBL structure that has a graded AlN composition. The proposed p-EBL can screen the polarization induced electric field in the p-EBL. As a result, holes will lose less energy after going through the proposed p-EBL, which correspondingly leads to the enhanced hole injection. Thus, an external quantum efficiency of 7.6% for the 275 nm DUV LED structure is obtained.
26 April 2021 in Photonics Research
In this work, a self-powered GaN-based metal-semiconductor-metal photodetector (MSM PD) with high responsivity has been proposed and fabricated. The proposed MSM PD forms an asymmetric feature by using the polarization effect under one electrode, such that we adopt an AlGaN/GaN heterojunction to produce the electric field, and by doing so, an asymmetric energy band between the two electrodes can be obtained even when the device is unbiased. The asymmetric feature is proven by generating the asymmetric current-voltage characteristics both in the dark and the illumination conditions. Our results show that the asymmetric energy band enables the self-powered PD, and the peak responsivity wavelength is 240 nm with the responsivity of 0.005 A/W. Moreover, a high responsivity of 13.56 A/W at the applied bias of 3 V is also achieved. Thanks to the very strong electric field in the charge transport region, when compared to the symmetric MSM PD, the proposed MSM PD can reach an increased photocurrent of 100 times larger than that for the conventional PD, even if the illumination intensity for the light source becomes increased.