6 June 2011 in Applied Optics
We introduce and demonstrate a ternary nonmechanical beam steering device based on polarization gratings (PGs). Our beam steering device employs multiple stages consisting of combinations of PGs and wave plates, which allows for a unique three-way (ternary) steering design. Ultrahigh efficiency () and polarization sensitive diffraction of individual PGs allow wide steering angles (among three diffracted orders) with extremely high throughput. We report our successful demonstration of the three-stage beam steerer having a field of regard with resolution at wavelength. A substantially high throughput of 78%–83% is observed that is mainly limited by electrode absorption and Fresnel losses.
8 May 2018 in Scientific Reports
Optical films and surfaces using geometric phase are increasingly demonstrating unique and sometimes enhanced performance compared to traditional elements employing propagation phase. Here, we report on a diffraction grating with wider angular bandwidth and significantly higher average first-order efficiency than the nearest prior art of metasurfaces, volume holographic gratings, and surface-relief gratings configured to achieve a steep deflection angle. More specifically, we demonstrate a liquid crystal (LC) polymer Bragg polarization grating (PG) with large angular bandwidth and high efficiency in transmission-mode for 532 nm wavelength and 400 nm period. Angular bandwidth was significantly increased by arranging two slanted grating layers within the same monolithic film. First, we studied the optical properties with simulation and identified a structure with 48° angular bandwidth and 70% average first-order efficiency. Second, we fabricated a sample using a photo-aligned chiral nematic LC, where the two grating slants were controlled by the chiral dopants. We measured 40° angular bandwidth, 76% average efficiency, and 96% peak efficiency. Strong input polarization sensitivity (300:1 contrast) and spectral bandwidth (200 nm) mostly matched prior PGs. This approach is especially advantageous for augmented-reality systems and nonmechanical beam steering.
30 November 2012 in Applied Optics
We present a novel optical element that efficiently generates orbital angular momentum (OAM) of light and transforms light between OAM modes based on a polarization grating with a fork-shaped singularity. This forked polarization grating (FPG) is composed of liquid crystalline materials, and can be made either static or switchable with high diffraction efficiency (i.e., 100% theoretically) into a single order. By spatially varying the Pancharatnam–Berry phase, FPGs shape the wavefront and thus control the OAM mode. We demonstrate theoretically and empirically that a charge FPG creates helical modes with OAM charge when a Gaussian beam is input, and more generally, transforms the incident helical mode with OAM charge into output modes with OAM charge . We also show for the first time that this conversion into a single mode can be very efficient (i.e., experimentally) at visible wavelengths, and the relative power between the two possible output modes is polarization-controllable from 0% to . We developed a fabrication method that substantially improves FPG quality and efficiency over prior work. We also successfully fabricated switchable FPGs, which can be electrically switched between an OAM generating/transforming state and a transmissive state. Our experimental results showed conversion efficiency for both configurations at 633 nm. These holographically fabricated elements are compact (i.e., thin glass plates), lightweight, and easily optimized for nearly any wavelength from ultraviolet to infrared, for a wide range of OAM charge, and for large or small clear apertures. They are ideal elements for enhanced control of OAM, e.g., in optical trapping and high-capacity information.
1 December 2009 in IEEE Photonics Technology Letters
A new beam steering concept comprising independently rotating, inline polarization gratings (PGs) is experimentally demonstrated. The approach, which we term Risley gratings, achieves high steering throughput within a large field-of-regard (FOR) in a fashion similar to Risley prisms, composed of wedged prisms. However, because PGs are patterned in thin liquid crystal layers, they enable a system with far less thickness, weight, and beam walk-off. Furthermore, large apertures are feasible and wavelengths from visible to infrared can be chosen. Any direction within a solid angle defined by twice the diffraction angle of each PG can be addressed mechanically. Here we demonstrate a Risley grating system with a 62° FOR and 89%-92% transmittance at 1550-nm wavelength, using two PGs with 6-¿m grating period.
9 July 2012 in Applied Optics
We introduce a new polarization conversion system (PCS) based on a liquid-crystal polarization grating (PG) and louvered wave plate. A simple arrangement of these elements laminated between two microlens arrays results in a compact and monolithic element, with the ability to nearly completely convert unpolarized input into linearly polarized output across most of the visible bandwidth. In our first prototypes, this PG-PCS approach manifests nearly 90% conversion efficiency of unpolarized to polarized for input light divergence, leading to an energy efficient picoprojector that presents high efficacy () with good color uniformity.