1 May 2026 in Measurement Science and Technology
This paper presents a hybrid experimental-finite element analysis (FEA) methodology for the vibration suppression of thin-walled enclosures in precision equipment. The core of this approach is the development of a high-fidelity dynamic model, which is rigorously updated and validated through experimental modal analysis (EMA). Utilizing impact hammer testing, the modal parameters (natural frequencies and mode shapes) of the enclosure were measured with high repeatability. The initial FEA model was then calibrated against the experimental results, achieving an exceptional agreement with frequency errors of less than 5% for the first four modes, which confirms the accuracy of the identified vibration transmission paths. This validated model precisely pinpointed the critical vibration modes and localized the weak areas, including the top cover and side panels, that were susceptible to resonance within the operational frequency band (180-240 Hz). Guided by these insights, targeted structural modifications were implemented, featuring a sealed screw fastening process, an R25mm fillet bend on the top cover. The effectiveness of these optimizations was quantitatively assessed through the updated FEA model, demonstrating a successful shift of the critical modal frequencies away from the excitation band with a separation margin exceeding 10%. Consequently, the overall vibration amplitude was reduced by 42.3%, and stress concentration was mitigated by 28%. The study underscores the efficacy of the hybrid modelling approach as a powerful tool for the design and troubleshooting of dynamic systems in precision engineering.