Cassini's last look at Saturn's rings: During the final stages of the Cassini mission, the spacecraft flew between the planet and its rings, providing a new view on this spectacular system (see the Perspective by Ida). Setting the scene, Spilker reviews the numerous discoveries made using Cassini during the 13 years it spent orbiting Saturn. Iess et al. measured the gravitational pull on Cassini, separating the contributions from the planet and the rings. This allowed them to determine the interior structure of Saturn and the mass of its rings. Buratti et al. present observations of five small moons located in and around the rings. The moons each have distinctive shapes and compositions, owing to accretion of ring material. Tiscareno et al. observed the rings directly at close range, finding complex features sculpted by the gravitational interactions between moons and ring particles. Together, these results show that Saturn's rings are substantially younger than the planet itself and constrain models of their origin. Science , this issue p. 1046 , p. eaat2965 , p. eaat2349 , p. eaau1017 ; see also p. 1028
13 May 2024 in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
The DESTINY + (Demonstration and Experiment of Space Technology for INterplanetary voYage with Phaethon fLyby and dUst Science) Dust Analyser (DDA) is a state-of-the-art dust telescope for the in situ analysis of cosmic dust particles. As the primary scientific payload of the DESTINY + mission, it serves the purpose of characterizing the dust environment within the Earth–Moon system, investigating interplanetary and interstellar dust populations at 1 AU from the Sun and studying the dust cloud enveloping the asteroid (3200) Phaethon. DDA features a two-axis pointing platform for increasing the accessible fraction of the sky. The instrument combines a trajectory sensor with an impact ionization time-of-flight mass spectrometer, enabling the correlation of dynamical, physical and compositional properties for individual dust grains. For each dust measurement, a set of nine signals provides the surface charge, particle size, velocity vector, as well as the atomic, molecular and isotopic composition of the dust grain. With its capabilities, DDA is a key asset in advancing our understanding of the cosmic dust populations present along the orbit of DESTINY + . In addition to providing the scientific context, we are presenting an overview of the instrument’s design and functionality, showing first laboratory measurements and giving insights into the observation planning. This article is part of a theme issue ‘Dust in the Solar System and beyond’.
In this paper, we describe the upgrade of a small electrostatic dust accelerator located at the University of Stuttgart. The newly developed dust source, focusing lens, differential detector and linac stage were successfully installed and tested in the beam line. The input voltage range of the dust source was extended from 0–20 kV to 0–30 kV. A newly developed dust detector with two differential charge sensitive amplifiers is employed to monitor particles with speeds from several m/s to several km/s and with surface charges above 0.028 fC. The post-stage linac provides an additional acceleration ability with a total voltage of up to 120 kV. The entire system of this dust accelerator works without protection gas and without a complex high voltage terminal. The volumes to be pumped down are small and can be quickly evacuated. The new system was used to accelerate micron- and submicron-sized metal particles or coated mineral materials. Improvements in the acceleration system allow for a wider variety of dust materials and new applications.
Researching cosmic dust requires terrestrial facilities for accelerating analogues of different sizes and masses. To address the area of very lightweight particles, electrostatic accelerators like Van de Graaf accelerators or Linear Accelerators (LINACs) have proven adequate. This article describes the components, dimensions, working principle and attributes of a variable frequency switched 6-stage LINAC of 120 kilovolts (kV) potential based at the Institute of Space Systems, University of Stuttgart. It utilizes negative voltages, no storage capacitors, isometric drift tubes, one semiconductor-based high-voltage switch per stage and there is no voltage drop during acceleration. The particle rate can reach up to 33 particles per second. By setting a target speed window, it autonomously chooses the right number of acceleration stages to meet that requirement, if possible. Micron-sized iron particles were accelerated successfully, achieving speed increase rates of up to three times the pre-LINAC speed and a total speed of up to 1300 m/s. This platform provides a new tool for dust sensor calibration, impact physics and material surface processing due to its ability to bring particles of different charge-to-mass ratios to a defined target speed.
This paper presents a novel AI‐based velocity calibration method for the Cosmic Dust Analyzer (CDA) onboard the Cassini spacecraft, in particular for impacts on the large Impact Ionization Detector (IID). The legacy polynomial calibration function, derived from laboratory measurements at a dust accelerator facility, assigns a velocity‐independent relative uncertainty of and is restricted to signals with a peak amplitude above for the QI channel. We propose a two‐stage deep learning architecture that combines a Temporal Convolutional Network Autoencoder for unsupervised feature extraction with a Mixture Density Network for probabilistic velocity prediction. The Autoencoder compresses the 510‐sample QI impact signals into a 3‐dimensional latent space that captures the essential morphological characteristics of each impact event, while the Mixture Density Network maps this latent representation to a conditional Gaussian distribution, providing both a mean velocity estimate and an individual, signal‐dependent uncertainty. Trained and validated on 839 laboratory calibration events from two measurement campaigns, the method achieves a mean relative uncertainty of approximately for velocities above , a substantial improvement over the legacy function. Furthermore, the amplitude threshold for evaluating a signal is reduced from 20 fC to 9.7 fC, significantly expanding the population of calibratable dust impacts in the Cassini CDA archive. The Autoencoder's reconstruction loss additionally serves as an anomaly detector, flagging signals that fall outside the learned calibration space. These improvements enable more accurate dust velocity measurements with direct implications for reanalyzing dust dynamics and orbital elements throughout the Saturnian system and beyond.