1 August 2021 in Polymer Testing
5 October 2022 in Journal of Materials Science
1 March 2020 in Ambiente Construído
Resumo A nanotecnologia tem avançado muito nos últimos anos, promovendo o surgimento de novos materiais, como o grafite e suas composições, como óxido de grafeno e grafeno. Diante disso, este estudo avaliou física, química e mecanicamente argamassa de revestimento com incorporação de óxidode grafeno nas proporções de 0,04% e 0,1%. A adição provocou mínimas interferências nas propriedades físicas das argamassas contendo óxido de grafeno quando comparada à argamassa de referência, não comprometendo a argamassa final. Porém, com relação às propriedades mecânicas houve um aumento na resistência à compressão nas argamassas modificadas, quando comparadas à argamassa de referência, e a função desejabilidade pôde determinar que, com 82,45% de otimização, a proporção de 0,1% contribuiu para as melhores condições para a resistência à compressão e à tração na flexão das argamassas modificadas. As análises de superfície também colaboraram com a comprovação desse fato, pois é possível visualizar que quando há melhoria na dispersão do óxido de grafeno nas matrizes cimentícias, ocorre melhoria nas propriedades mecânicas.
21 September 2017 in Polímeros
FLFernando Luis Panin Lopes
Fernando Luis Panin Lopes
JOJúlio César Dainezi de Oliveira
Júlio César Dainezi de Oliveira
+1
The thermoplastic starch (TPS) is regarded as a promising material for manufacturing packaging and products with biodegradable properties. This study aimed at obtaining hydrophobic starch using silanized silica nanoparticles (nSS) with hexamethyldisilazane. A factorial design 22 with central point was developed to evaluate the influence of glycerol (plasticizer) and nSS addition on the properties of water absorption, solubility and TPS contact angle. The materials morphology was also evaluated by means of scanning electron microscopy. The amount of glycerol and nSS influenced on starch hydrophobic character, for the increase of the glycerol dosage contributed to the increase of absorption and solubility of TPS in water. On the other hand, nSS has greater influence on the characteristics related to the TPS surface, favoring an increase of up to 27% in the contact angle values. Therefore, the sample with the greatest hydrophobic character was obtained by using lowest amounts of glycerol (30%) and highest amounts of nSS (5%).
1 January 2024 in Anais da Academia Brasileira de Ciências
The use of agro-industrial wastes as biosorbents is a promising alternative for sustainable, economical and effective adsorption. However, few studies evaluate the use of Brazilian agro-industrial waste as biosorbents without physicochemical pre-treatment. This study explored the potential of sugarcane bagasse (SCB) and rice husk waste (RHW) as low-cost biosorbents for yellow tartrazine dye removal. Characterization of the materials were carried out using ATR-FTIR, SEM, pHPZC and lignocellulosic composition. Cellulose and hemicellulose were the major constituents of both materials. By the Box-Behnken experimental design, the response surfaces indicated maximum removal of 60.1% for SCB and 83.1% for RHW. While the qmax of SCB and RHW for tartrazine were relatively low at 2.45 ± 0.03 mg g-1 and 3.55 ± 0.02 mg g-1, respectively, the potential for achieving higher dye removals by increasing the adsorbent dosage in large-scale applications warrants further investigation. For both biosorbents, the pseudo-second-order kinetic model and Brouers-Sotolongo isotherm provided the best fit for the data, and the adsorption processes were spontaneous and exothermic. In conclusion, SCB and RHW demonstrated high tartrazine removal, promoting sustainable agro-industrial waste management.
1 March 2017 in Polímeros
GMGuilherme Augusto Mantovani
Guilherme Augusto Mantovani
ARAndrelson Wellington Rinaldi
Andrelson Wellington Rinaldi
+1
In this study, an alternative method for recycling residues of labels and stickers (parings) containing biaxically oriented polypropylene (BOPP) and polyurethane-based glue was discussed. The recycling of this type of material is complicated, once the separation and the milling processes are difficult to be accomplished, due to the presence of a large amount of glue. In this study, sugarcane bagasse ash was used to enable the milling process of stickers residues. Composites were prepared with post-consumer polypropylene extrusion with different polypropylene/parings ash ratio. These materials were analyzed by tensile, three point flexural, hardness, density, water absorption, Izod impact tests, thermogravimetric analysis, environmental exposure and scanning electron microscopy. Addition of sticker residues/ash to the polypropylene matrix makes the material more rigid and does not affect significantly thermal and degradation properties. Thus, the recycling process proposed in this paper is environmentally and economically viable.