Zhuoliang Zhang

Zhuoliang Zhang

Auto-generated profile, based on publicly available information

Zhuoliang Zhang

Laboratory of Cognition and Decision Intelligence for Complex Systems, Institute of Automation, Chinese Academy of Sciences, Beijing, China

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 May 2023 in IEEE Transactions on Automation Science and Engineering
Verified
Journal Article
Closed access
BLBen Lu
Ben Lu
CZChao Zhou
Chao Zhou
JWJian Wang
Jian Wang
ZZZhuoliang Zhang
Zhuoliang Zhang
MTMin Tan
Min Tan
Due to the complex mechanism and fabrication process of flexible materials, it remains extremely challenging for a flexible robotic fish to achieve fast and efficient locomotion. In this article, taking advantage of the passive bending and energy storage properties of flexible materials, we propose an untethered robotic fish with multiple flexible joints to achieve high performance and low Cost of Transport (COT). First, combining rigid links and flexible materials, a compact flexible tail with a simple and efficient structure is proposed. Next, the pseudo-rigid body theory is applied to analyze the deformation of passive joints, and a full-state dynamic model is established. More importantly, an optimization method by adjusting the phase differences of the passive joints is used to obtain high aquatic performance. Finally, extensive simulations and experiments validate the effectiveness of the proposed method, and the robotic fish can achieve a maximum speed of 1.63 body length (BL) per second and a minimum COT of 4.8 J/m (2.87 J/m $\cdot$ kg). Compared with the multi-joint robotic fish with a similar design, the COT is reduced by up to 81.05% with the basically same aquatic ability. Excitingly, the flexible robotic fish can achieve a COT of 7.36 J/m at 1.23 BL/s, which is 15.72%-36.34% lower than that of the bluefin tuna and is within the range of yellowfin tuna, offering valuable insight into high speed and long endurance applications for underwater robots. Note to Practitioners –This paper is motivated by the design and optimization of an efficient bionic flexible underwater robot with high aquatic abilities, which is conducive to aquatic tasks that require long-time and long-distance sailing, such as underwater topographic exploration, submarine archaeology, and underwater search and rescue. Existing studies of free-swimming bionic underwater robots usually focus on the improvement of swimming speed and rarely consider achieving both high swimming performance and low energy cost. Thus, this paper proposes a bionic underwater robot design with two joints made of flexible materials on the tail to address the problem. Based on detailed analyses of the hydrodynamic force and flexible joint deformation, we propose an effective optimization method for swimming performance. A series of simulations and experiments suggest that the mechatronic design and optimization method are practical and valid. Hopefully, our design and method can provide theoretical guidance for engineers to design and optimize robots with flexible joints.

13 September 2022 in Bioinspiration & Biomimetics
Verified
Journal Article
Closed access
QZQianqian Zou
Qianqian Zou
CZChao Zhou
Chao Zhou
BLBen Lu
Ben Lu
Xiaocun LiaoXiaocun Liao
Xiaocun Liao
ZZZhuoliang Zhang
Zhuoliang Zhang
Undulation regulation in a robotic fish propelled by a passive flexible tail is more similar to that of a natural fish than with a rigid tail, owing to the smooth curvature of the flexible tail. Moreover, it has been observed that fish change the stiffness of their bodies to adapt to various swimming states. Inspired by this, a stiffness optimization scheme is explored for a novel elastic tail, which can improve the performance of the robotic fish. Spring steels are used as passive flexible joints of the fishtail; these can be easily expanded into multi-joint structures and the joint stiffness can be altered by changing the joint size. In this study, the Lagrangian dynamic method is employed to establish a dynamic model of the robotic fish in which passive flexible joints are simplified by a pseudo-rigid-body model. In addition, the hydrodynamics of the head and tail are analyzed using the simplified Morison equation and quasi-steady wing theory, respectively. Furthermore, to determine unknown hydrodynamic parameters in the dynamic model, a parameter identification method is applied. The results show that the identified simulation speeds fit the experimental speeds well within a wide range of stiffness values. Finally, to improve performance, the influence of joint stiffness and frequency on swimming speed is investigated based on the identified dynamic model. At each frequency, the optimal joint stiffness distribution is one that reduces the stiffness from the front to the rear. At the maximum driving frequency of 2.5 Hz, the optimal swimming speed is 0.3 body lengths per second, higher than that when rigid joints are used.

31 December 2022 in Journal of Intelligent & Robotic Systems
Verified
Journal Article
Closed access
PDF file
Xiaocun LiaoXiaocun Liao
Xiaocun Liao
CZChao Zhou
Chao Zhou
JWJian Wang
Jian Wang
junfeng Fanjunfeng Fan
junfeng Fan
ZZZhuoliang Zhang
Zhuoliang Zhang

18 March 2024 in IEEE Transactions on Systems, Man, and Cybernetics: Systems
Verified
Journal Article
Closed access
YOYaming Ou
Yaming Ou
junfeng Fanjunfeng Fan
junfeng Fan
CZChao Zhou
Chao Zhou
SKSong Kang
Song Kang
ZZZhuoliang Zhang
Zhuoliang Zhang
MTMin Tan
Min Tan
Underwater collision-free navigation and dense reconstruction are essential for marine refined exploration. However, existing passive vision-based methods are difficult to apply in low-light and weak-feature underwater environments. In this article, a more adaptable three-dimensional (3-D) dense mapping robotic system based on self-designed scanning binocular structured light (BSL), named ROV-Scanner, is developed to address this challenge. First, the measurement principle based on the refraction model ensures its high accuracy. Second, an underwater 3-D dense mapping algorithm fusing the Doppler velocity log (DVL), inertial measurement unit (IMU), and pressure sensor multifrequency information is proposed to realize dense mapping during robot motion. Then, an air–water two-stage extrinsic calibration algorithm is proposed. In particular, the extrinsic parameters between DVL and camera are innovatively calibrated using BSL, enhancing robustness. Furthermore, for the first time, a framework of BSL-based collision-free navigation is presented to guarantee the safe movement of the system in unknown environments. Experimental results show that our system can simultaneously achieve autonomous collision-free navigation and dense mapping in dark underwater environments, which has great potential for application in marine refined exploration.

2 August 2023 in IEEE Transactions on Robotics
Verified
Journal Article
Closed access
ZZZhuoliang Zhang
Zhuoliang Zhang
CZChao Zhou
Chao Zhou
LCLong Cheng
Long Cheng
XWXiaofei Wang
Xiaofei Wang
MTMin Tan
Min Tan
The past decade has seen the rapid development of the robotic fish in many aspects. However, the velocity measurement problem has not been fully addressed, which limits the autonomy of the robotic fish. To this end, an artificial lateral line (ALL) sensor, inspired by the sensory organs of fish, is developed in this article. By measuring the deformation of the sensitive element, the local flow field around the robotic fish is sensed. According to the characteristics of fishlike motions, a fairing structure is proposed to suppress the turbulence noise and yaw motion noise caused by fishlike oscillation of the tail. This structure ensure that the flow measured by the ALL sensor is closer to laminar flow under viscous effects. Furthermore, to measure the magnitude and direction of the robotic fish velocity, an ALL sensor array is assembled by mounting multiple sensors on the robot's surface to sense the flow field distribution. Next, a kinematic-based fusion method is proposed for the array system, which obtained the real-time velocity vector of the robotic fish by solving overdetermined motion equations. The proposed ALL array system is tested on a freely swimming robotic fish, and our method achieves a mean absolute error of 0.018 m/s, a linearity ( $R^{2}$ ) of 0.951, and a position tracking error of 0.085 m. Additionally, the fairing structure is found to improve the signal-to-noise ratio by 116%.

18 June 2024 in IEEE Transactions on Automation Science and Engineering
Verified
Journal Article
Closed access
ZZZhuoliang Zhang
Zhuoliang Zhang
CZChao Zhou
Chao Zhou
LCLong Cheng
Long Cheng
junfeng Fanjunfeng Fan
junfeng Fan
MTMin Tan
Min Tan
Compared with traditional underwater vehicles, robotic fish have been receiving increasing attention in recent years due to their excellent maneuverability. However, the characteristics of fishlike undulatory motions and complex underwater working environment have posed significant challenges to robotic fish speed measurement, limiting their autonomy. To overcome these challenges, an artificial lateral line sensor (ALLS) was developed, drawing inspiration from the tactile system of fish. It captured the real-time speed of robotic fish through assessing the deformation of the stressed component under laminar flow impact. To mitigate turbulence disturbances near the ALLS, three flow control components, fairing, flow conditioner, and flow collector, were proposed to attenuate turbulence noise under the viscous effect. Furthermore, a physics-informed calibration method was presented to establish the nonlinear model of ALLS. Specifically, a physical model embedding algorithm based on data resampling was used to mitigate the risk of overfitting by the multilayer perceptron, considering the influence of turbulence disturbance and fishlike undulatory noise. Compared with the classical calibration method based on physical model fitting, the calibration method proposed in this paper reduced the error by 36.0%. Our ALLS’s final mean absolute error was 0.016 m/s with a linearity (R $^{2}$ ) of 0.956. The experimental results indicated that the significant changes in the motion state of robotic fish reduced the accuracy of ALLS. The fusion with other sensors is expected to enhance the robustness of ALLS in the future. Note to Practitioners —The motivation of this paper is to design an artificial lateral line sensor based on surface flow field detection and turbulence noise suppression, providing a small-sized and high-precision solution to the speed measurement problem of bionic robotic fish. Most existing ALLS research focused on developing new types of sensors based on different measurement principles, without suppressing the noise caused by fishlike motions, and most experiments were conducted in environments with excessive controls rather than free-swimming robotic fish. To this end, we developed an ALLS based on deformation measurement and proposed three flow control components to make the measured flow more stable. Furthermore, a physics-informed overfitting suppression method was used for the calibration task of the ALLS. A series of simulations and experiments demonstrated that the proposed turbulence noise suppression and calibration method were practical and effective. Hopefully, our methods can provide theoretical and technical guidance to marine engineers for underwater vehicle speed measurement and flow sensing. The recommended flow control component is applicable for conditioning surface fluids in pneumatic control systems. Furthermore, the proposed biomimetic tactile sensor is poised to inspire tactile-based human-machine interaction methods.