The dynamic shear modulus (DSM) is the most basic soil parameter in earthquake or other dynamic loading conditions. By using the resonant column tests, the effect of the consolidation ratios on the maximum DSM for two types of sands is investigated and an incremental formula for calculating the maximum DSM for the cases of the anisotropic consolidation is presented. The results indicate that the increase in the maximum DSM due to kc>1.0 is significantly larger than that predicted by Hardin and Black's formula. Also, the nonlinear behavior of DSM due to the anisotropic consolidation is investigated and its effect on the surface response spectrum is presented in the paper. By comparing to the isotropic consolidation, the consideration for the actual anisotropic consolidation makes the earthquake influence factor increase and makes the characteristic period decrease. For the incidence of the strong seismic excitation, the effect of the anisotropic consolidation on earthquake ground motion should be considered.
Reinforced concrete (RC) frames are designed based on the strong column-weak beam (SCWB) philosophy to reduce structural damage and collapse during earthquakes. The SCWB design philosophy is ensured by the required minimum flexural strength ratio of columns to beams (FSRCB) in the seismic code. Quantifying the relationship between the FSRCB and the collapse capacity of the frames may facilitate the efficient assessment of the seismic performance of the existing or newly designed RC frames. This paper investigates the influence of different FSRCBs on the collapse capacity of three- and nine-story RC frames designed according to Chinese seismic codes. The results show that the collapse capacities of the RC frames can be efficiently improved by increasing the FSRCB, and the collapse capacities of frames with FSRCB = 2.0 are improved by approximately 1.6–2.0 times compared with those of the frames with FSRCB = 1.2. Compared with the middle- or high-rise (nine-story) frames, it is more efficient to improve the collapse capacity for low-rise (three-story) frames by increasing the value of CBFSR. The logarithmic standard deviation of the collapse capacity of the RC frames designed according to the Chinese seismic codes ranges from 0.5–0.9, which is larger than the proposed maximum logarithmic standard deviation (0.4) in FEMA P695.