A thermodynamic assessment of the Ni–Te system has been performed using the Calphad method, based on experimental data available in the literature. The proposed description has been developed for use in the modeling of fission-product-induced internal corrosion of stainless steel cladding in Generation IV nuclear reactors. DFT calculations were performed to obtain 0 K properties of solid phases to assist the thermodynamic optimization. The ionic liquid two-sublattice model was used, and most solution phases were modeled using interstitial metal sub-lattices. With a strict number of parameters, the resulting description satisfactorily reproduces all thermodynamic properties and high-temperature phase transitions. The metastable miscibility gap in the Ni-rich liquid that is experimentally suggested is not present in the final description. The \(\delta \) phase exhibits a metastable order-disorder transition between the CdI\(_{2}\) and NiAs types of interstitial nickel distribution. The CdI\(_{2}\) prototype is the stable space group at room temperature. Low-temperature ordering phase transitions have been disregarded in this description, since they are not of interest to the application of corrosion in nuclear reactors.
Fe-Ni-Te alloys have been experimentally studied using isothermal heat treatments with SEM–EDS and WDS, XRD, and DTA in order to add phase diagram data for a thermodynamic assessment. This is for the application of fission product-induced corrosion of the stainless steel cladding of nuclear fuel pins, where Te is a key element. Phase diagram data are presented at \(700\) and \(800\,{{^\circ }{\mathrm{C}}}\), together with the solidus and liquidus temperatures from 44 to 80 at.% Te. Metallographic and XRD analysis show that the \(\beta 2\) phase forms as a Widmanstätten structure, preferentially precipitated in the \(\tau \) phase. SEM images show unidentified precipitates in several samples.
The Thermo-Calc AM Module allows the user to optimize printing parameters for melt pool behavior and printability in Powder Bed Fusion. This model is now able to predict the absorptivity of the alloy, and accounts for important physical aspects affecting the melt pool behavior. All the relevant properties for the simulation of the melt pool are described by the underlying alloy databases as a function of composition and temperature, allowing the user to explore printing of virtually any chemistry.This work presents a new Electron Beam heat source model, under either vacuum or gas atmosphere. Furthermore, it is now feasible to combine the Marangoni fluid flow with separate powder properties (where alloy properties are scaled by a powder density factor). This estimates the powder bed properties (heat conductivity, density and viscosity) based on the packing density of the powder bed to accurately solve AM simulations.