23 December 2021 in ACS Applied Materials & Interfaces
Hafnium oxide plays an important role as a dielectric material in various thin-film electronic devices such as transistors and resistive or ferroelectric memory. The crystallographic and electronic structure of the hafnia layer often depends critically on its composition and defect structure. Here, we report two novel defect-stabilized polymorphs of substoichiometric HfO2–x with semiconducting properties that are of particular interest for resistive switching digital or analog memory devices. The thin-film samples are synthesized by molecular beam epitaxy with oxygen engineering that allows us to cover the whole range of metallic Hf with oxygen interstitials to HfO2. The crystal and defect structures, in particular of a cubic low-temperature phase c-HfO1.7 and a hexagonal phase hcp-HfO0.7 are identified by X-ray diffraction, in vacuo electron spectroscopic, and transmission electron microscopic methods. With the help of UV/Vis transmission data, we propose a consistent band structure model for the whole oxidation range involving oxygen vacancy-induced in-gap defect states. Our comprehensive study of engineered hafnia thin films has an impact on the design of resistive memory devices and can be transferred to chemically similar suboxide systems.
5 August 2019 in Advanced Electronic Materials
A model device based on an epitaxial stack combination of titanium nitride (111) and monoclinic hafnia (11) is grown onto a c‐cut Al2O3‐substrate to target the role of grain boundaries in resistive switching. The texture transfer results in 120° in‐plane rotated m‐HfO2 grains, and thus, in a defined subset of allowed grain boundary orientations of high symmetry. These engineered grain boundaries thread the whole dielectric layer, thereby providing predefined breakdown paths for electroforming‐free resistive random access memory devices. Combining X‐ray diffraction and scanning transmission electron microscopy (STEM)–based localized automated crystal orientation mapping (ACOM), a nanoscale picture of crystal growth and grain boundary orientation is obtained. High‐resolution STEM reveals low‐energy grain boundaries with facing () and (21) surfaces. The uniform distribution of forming voltages below 2 V—within the operation regime—and the stable switching voltages indicates reduced intra‐ and device‐to‐device variation in grain boundary engineered hafnium‐oxide‐based random access memory devices.
26 January 2023 in ACS Applied Electronic Materials
Hafnium oxide is an outstanding candidate for next-generation nonvolatile memory solutions such as OxRAM (oxide-based resistive memory) and FeRAM (ferroelectric random access memory). A key parameter for OxRAM is the controlled oxygen deficiency in HfO2-x which eventually is associated with structural changes. Here, we expand the view on the recently identified (semi-)conducting low-temperature pseudocubic phase of reduced hafnium oxide by further X-ray diffraction analysis and density functional theory (DFT) simulation and reveal its rhombohedral nature. By performing total energy and electronic structure calculations, we investigate phase stability and band structure modifications in the presence of oxygen vacancies. With increasing oxygen vacancy concentration, the material transforms from the well-known monoclinic structure to a (pseudocubic) polar rhombohedral r-HfO2-x structure. The DFT analysis shows that r-HfO2-x is not merely epitaxy-induced but may exist as a relaxed compound. Furthermore, the electronic structure of r-HfO2-x as determined by X-ray photoelectron spectroscopy and UV/Vis spectroscopy corresponds very well with the DFT-based prediction of a conducting defect band. The existence of a substoichiometric (semi-)conducting phase of HfO2-x is obviously an important ingredient to understand the mechanism of resistive switching in hafnium-oxide-based OxRAM.
9 January 2023 in Applied Physics Letters
HfO2-based resistive random-access memory devices are promising candidates for new memory and computing applications. Hereby, scaling of the devices is a key issue, where overall fundamental switching and conduction mechanisms can be easily influenced by changes in the oxide layer thickness. This work addresses the oxide thickness-dependent resistive switching characteristics in Cu/HfO2/Pt memory devices through bipolar DC switching characterization. Forming, reset, and set characteristics are investigated depending on the oxide layer thickness, revealing a significant difference for thicker compared to thinner films. Thicker samples tend to show a more abrupt reset behavior and a larger set voltage variance, while for thinner samples, a more gradual reset behavior and a low set variance is found. These phenomena can be explained by a model based on thermally assisted electrochemical metallization. Furthermore, to understand the conduction mechanism of the devices, current–voltage curves of the set process were investigated. The devices are found to have an Ohmic conduction mechanism in the lower voltage region generally, while thinner samples tend to show an additional space-charge-limited current conduction mechanism in a higher voltage region.
9 September 2020 in Advanced Electronic Materials
This work investigates the transition from digital to gradual or analog resistive switching in yttrium oxide‐based resistive random‐access memory devices. It is shown that this transition is determined by the amount of oxygen in the functional layer. A homogeneous reduction of the oxygen content not only reduces the electroforming voltage, allowing for forming‐free devices, but also decreases the voltage operation window of switching, thereby reducing intra‐device variability. The most important effect as the dielectric becomes substoichiometric by oxygen engineering is that more intermediate (quantized) conduction states are accessible. A key factor for this reproducibly controllable behavior is the reduced local heat dissipation in the filament region due to the increased thermal conductivity of the oxygen depleted layer. The improved accessibility of quantized resistance states results in a semi‐gradual switching both for the set and reset processes, as strongly desired for multi‐bit storage and for an accurate definition of the synaptic weights in neuromorphic systems. A theoretical model based on the physics of mesoscopic structures describing current transport through a nano‐constriction including asymmetric potential drops at the electrodes and non‐linear conductance quantization is provided. The results contribute to a deeper understanding on how to tailor materials properties for novel memristive functionalities.
6 July 2020 in Applied Physics Letters
This work addresses the thermal stability of bipolar resistive switching in yttrium oxide-based resistive random access memory revealed through the temperature dependence of the DC switching behavior. The operation voltages, current levels, and charge transport mechanisms are investigated at C, C, and C, and show overall good temperature immunity. The set and reset voltages, as well as the device resistance in both the high and low resistive states, are found to scale inversely with increasing temperatures. The Schottky-barrier height was observed to increase from approximately 1.02 eV at C to approximately 1.35 eV at C, an uncommon behavior explained by interface phenomena.