1 May 2014 in International Journal of Heat and Mass Transfer
22 February 2019 in Journal of Materials Chemistry A
Developing high-performance electrodes that enable high redox activity and quick mass transport has been a central issue to enhance energy efficiency and current density in all-vanadium redox flow batteries (VRFBs). In this work, a gradient-pore-oriented graphite felt (gradient-pore GF) electrode that contains pores from nano- to micro-scale was proposed by a facile one-step etching method. In this uniquely developed electrode, the microscale pores (∼20 μm) offer pathways for electrolyte flow, the nanoscale pores (∼20 nm) render sufficient active sites for electrochemical reactions, while the mesoscale pores (∼0.5 μm) as a “bridge” between nano and micro scale pores both facilitate the formation of active sites and reduce the electrolyte diffusion resistance. Thanks to the multiscale-pore-architectured structure, the high specific surface area (21.16 m2 g−1), and the abundant oxygen functional groups (25.69%), gradient-pore GF has demonstrated high electrochemical activity towards vanadium ion redox reactions on both positive and negative sides. The battery assembled with the gradient-pore GF electrodes yields an energy efficiency as high as 79.74% at the current density of 200 mA cm−2, 19.09% higher than that with pristine graphite felt electrodes. Additionally, its energy efficiency can reach 63.41% at high current densities up to 500 mA cm−2. This work provides an effective way to develop a high-performance electrode that possesses great potential applications in VRFBs and other battery systems.
3 January 2020 in Journal of Materials Chemistry A
A two-dimensional Si3C monolayer possessing excellent theoretical specific capacities and conductivities guarantees great potential for anode application in Li/Na/K-ion batteries.
14 January 2020 in Journal of Materials Chemistry A
It remains a major challenge to develop a facile method to prepare non-noble metal electrocatalysts with high activity and durability to drive the sluggish oxygen reduction reaction (ORR) for proton exchange membrane fuel cells (PEMFCs). Herein, a highly efficient bimetallic Zn/Fe@N-doped hierarchical porous carbon (Zn/Fe–N–C) catalyst derived from ZIF-8 and hemin (host–guest) was firstly reported by one-step thermal treatment. Fe2+ spatially separated by using the hemin guest in the ZIF-8 framework and hydrocarbon-branched chains form rich Fe–Nx active sites, and the evaporation of Zn2+ generates a highly porous structure in the Zn/Fe–N–C catalysts. Benefitting from this unique structure and composition, the resulting Zn/Fe2–N–C catalyst exhibits excellent ORR activities in both 0.1 M KOH (onset potential, Eonset = 1.08 V, and half-wave potential, E1/2 = 0.86 V vs. RHE) and 0.5 M H2SO4 media (Eonset = 1.04 V and E1/2 = 0.81 V), which are even comparable to those of the commercial Pt/C catalyst, and ranks among the top reported electrocatalysts. In addition, it also has outstanding long-term durability and good methanol resistance, much better than those of Pt/C in both acidic and alkaline media, which makes it one of the best non-noble alternatives of Pt-based catalysts for ORR electrocatalysis. This work highlights the potential to rationally design and fabricate high-performance ORR catalysts for fuel cell applications.
1 March 2020 in Applied Energy
3 February 2011 in Energy & Environmental Science
In this paper, we report the synthesis of a carbon supported ternary PdIrNi catalyst for the ethanol oxidation reaction in anion-exchange membrane direct ethanol fuel cells (AEM DEFCs). We demonstrate that the use of the ternary PdIrNi catalyst at the anode of an AEM DEFC can increase the peak power density by more than 122% as compared with the use of the monometallic Pd catalyst, 69% as compared with the use of the bimetallic PdIr catalyst, and 44% as compared with the use of the bimetallic PdNi catalyst. Cyclic voltammetry and chronopotentiometry analyses prove that the ternary PdIrNi catalyst is catalytically much more active and more stable than the monometallic Pd catalyst and the bimetallic PdIr and PdNi catalysts.