In this article, a process for reducing the electromagnetic vibration and noise by changing the shape of the stator is presented. Although the fundamental wave of the air gap magnetic flux density contributes to the average torque of the motor, other spatial harmonics which were except the fundamental wave of that cause vibration and enfeeble the output of the motor. Therefore, it is important to reduce the spatial harmonics for performance of the motor. Through the proposed process, it is possible to obtain an objective function to reduce the specific harmonics by assigning weights to each spatial harmonic. The reduction in the fundamental wave is minimized and it is possible to reduce the spatial harmonics that have an adverse impact on vibration. After the process, a model can be found that maintains the electromagnetic performance as much as possible while optimally reducing the vibration. To verify the process, the electromagnetic vibrations by a radial force of the proposed and conventional models were compared, and it was confirmed that the electromagnetic vibration of the proposed model was reduced. The validity of the analysis was proved through finite-element analysis.
Interior permanent magnet synchronous motors have the advantage of being applicable to various fields owing to their high torque density and wide operating range but have the disadvantage of large electromagnetic vibrations. To calculate the electromagnetic vibration, analysis of the magnetic flux density of the air gap using the finite element method (FEM) is essential. This process requires a significant amount of time because of the use of many analysis models. The radial force, which is the source of vibration, is expressed as the square of the air gap magnetic flux density, the vibration can be predicted in advance by calculating the waveform of the air gap magnetic flux density using a formula. In this paper, a new air gap relative permeance formula is proposed when an offset is applied to the outer diameter of the rotor to reduce electromagnetic vibration. By calculating the waveform of the air gap magnetic flux density using the proposed air gap relative permeance formula, a model with a minimum total harmonic distortion is selected. The validity of the formula was confirmed by comparing the FEM result with the waveform of the air gap magnetic flux density calculated using the proposed formula. The proposed model minimized the vibration and was confirmed using FEM. Using the proposed formula, vibration can be easily and quickly predicted in analytic way. The prototype of the final model was developed and compared using FEM, and the validity of the analysis result was confirmed.
With the recent increase in the demand for convenient handheld home appliances, the quietness, power density, and weight of motors have been extensively studied. To this end, this article proposes a separated teeth motor (STM) with improved weight reduction and higher productivity than those of existing hair dryer motors. To reduce the weight of the stator, which possesses a high weight specificity in the motor, an STM model was designed with divided teeth to facilitate reduced iron consumption. Using this model, improvements in the production and performance of STM motors are proposed. For example, the workability of the motor is increased for the same torque; moreover, manufacture of compact and lightweight STMs is deemed possible. In addition, a reduction in torque ripple, cogging torque, and total harmonic distortion has been demonstrated via a finite-element method.