1 August 2021 in Physics of Fluids
In this study, the effect of the shape of the stenosis on the flow transition in an artery is investigated. Different shapes of the stenosis including round, oval, elongated, half-moon, bean-shape, and crescent with and without eccentricity at a constant degree of stenosis are studied. A computational model, validated against the in-house Particle Image Velocimetry experimental results, is used to investigate the flow behavior. The results showed that the length of the jet region after the stenotic section varies significantly for different shapes of the stenosis. Based on the analysis of turbulent kinetic energy, power spectral density, and the spectral entropy of stream-wise velocity fluctuations, it was shown that eddies are formed after the dissipation of jet flow downstream of the stenosis. It was also shown that the intensity of the velocity fluctuations differs for different shapes of the stenosis. Furthermore, using the proper orthogonal decomposition method, it was shown that the shape of the stenosis has a significant impact on the downstream coherent structures. It was found that regardless of the degree of stenosis, specific shapes of the stenosis, such as round concentric, create less serious hemodynamic complications compared to the other shapes of the stenosis.
1 January 2014 in Mathematical Problems in Engineering
A coupled system of nonlinear ordinary differential equations that models the three‐dimensional flow of a nanofluid in a rotating channel on a lower permeable stretching porous wall is derived. The mathematical equations are derived from the Navier‐Stokes equations where the governing equations are normalized by suitable similarity transformations. The fluid in the rotating channel is water that contains different nanoparticles: silver, copper, copper oxide, titanium oxide, and aluminum oxide. The differential transform method (DTM) is employed to solve the coupled system of nonlinear ordinary differential equations. The effects of the following physical parameters on the flow are investigated: characteristic parameter of the flow, rotation parameter, the magnetic parameter, nanoparticle volume fraction, the suction parameter, and different types of nanoparticles. Results are illustrated graphically and discussed in detail.
1 February 2020 in Physics of Fluids
Non-invasive measurement of pressure drop has great clinical significance for the treatment of coronary artery diseases. The objective of this study is to develop a relationship that can estimate pressure drop in a stenosed coronary artery model as a function of different parameters such as blood viscosity, artery length and diameter, flow rate and flow profile, and shape and degrees of stenosis. Experimental pressure measurements from a wide range of degrees of stenosis and critical simplified geometries of stenosis along with different unsteady flow profiles are employed to evaluate the pressure drop equation. To calculate the blockage term of the pressure drop, several experimental cases are investigated, and the results show that the blockage factor is strongly dependent on the shape and degree of stenosis. Furthermore, different unsteady flow profiles are applied to calculate the pulsatile pressure drop term, and it is found that the pulsatility parameter is not a function of the flow profile or the shape of the stenosis. However, it is only a function of the degree of stenosis. To test the validity of the developed equation, pressure drops through stenosed coronary artery models with the real physiological flow profile of the left and right coronary arteries were predicted and compared with the experimental measurements. The proposed equation is able to determine the pressure drop inside a stenosed coronary artery non-invasively using the measurement of the flow profile inside the artery as well as the images of the stenosed coronary artery obtained based on the non-invasive methods.
3 May 2020 in International Journal for Numerical Methods in Biomedical Engineering
1 March 2021 in Physics of Fluids
Understanding the effect of the artery curvature on the pressure drop inside the arteries is of great importance due to the existence of several curved portions inside the coronary arterial system. In this paper, an experimental model is developed to account for the effect of the curvature of the coronary arteries on the pressure drop and Fractional Flow Reserve (FFR). FFR is an index for the evaluation of the functional significance of coronary stenosis and is defined as the ratio of the coronary pressure downstream of the stenosis to its upstream value. To measure the pressure drop and FFR across curved artery models, three-dimensional-printed curved artery models are fabricated and installed in the test section of the experimental rig. For ratios of curvature radius over the artery diameter ranging from 2 to 7, there are a minimum value for the pressure drop and, hence, a corresponding maximum value for FFR at a ratio of approximately 3. For the curved arteries with larger curvature radii, the pressure drop increases, and consequently, FFR decreases with an increase in the radius. The results showed that an accurate evaluation of the pressure drop and FFR inside a curved coronary artery can only be achieved by accounting for the effect of curvature parameters including the curvature angle and radius, such that neglecting the effect of the artery curvature results in an underestimation of the pressure drop by about 25%–35%. The developed equation is able to determine the pressure drop inside a curved coronary artery model noninvasively.
13 August 2024 in Renewable Energy