10 November 2017 in Superconductor Science and Technology
High temperature superconducting (HTS) coils are key parts of many AC applications, such as generators, superconducting magnetic energy storage and transformers. AC loss reduction in HTS coils is essential for the commercialization of these HTS devices. Magnetic material is generally used as the flux diverter in an effort to reduce the AC loss in HTS coils. To achieve the greatest reduction in the AC loss of the coils, the flux diverter should be made of a material with low loss and high saturated magnetic density, and the optimization of the geometric size and location of the flux diverter is required. In this paper, we chose Ni-alloy as the flux diverter, which can be processed into a specific shape and size. The influence of the shape and location of the flux diverter on the AC loss characteristics of stacked (RE)BCO tapes is investigated by use of a finite element method. Taking both the AC loss of the (RE)BCO coils and the ferromagnetic loss of the flux diverter into account, the optimal geometry of the flux diverter is obtained. It is found that when the applied current is at half the value of the critical current, the total loss of the HTS stack with the optimal flux diverter is only 18% of the original loss of the HTS stack without the flux diverter. Besides, the effect of the flux diverter on the critical current of the (RE)BCO stack is investigated.
23 July 2020 in Superconductor Science and Technology
High T c superconducting (HTS) DC cable is a promising solution for large-scale power transmission over long distance. However, the refrigeration system for HTS cable is indispensable but undesirable. Considering that LNG (liquid natural gas) is now one kind of clean energy that is used more and more widely, it is possible to integrate HTS cable and LNG transportation into a single pipeline, resulting in a new energy transportation system- a HTS energy pipeline. In this paper, the principle and structure of the energy pipeline are first discussed and then the basic physical properties of the HTS tapes and liquid insulation medium in the LNG temperature range are analyzed. On this basis, a 10 kV/1 kA energy pipeline is designed, fabricated and tested.
10 November 2020 in Superconductor Science and Technology
With the increase of electricity demand and the rapid development of renewable energy generation, it is becoming more and more important to ensure the safety and stability of power grid, where a superconducting fault current limiter (SFCL) could play an important role. In recent years, a lot of research work has been done in China on the application of high temperature superconducting (HTS) power technology, especially in the aspects of superconducting fault current limiting technology, superconducting fault current limiting-breaking technology, superconducting fault current limiting- magnetic energy storage technology, and superconducting fault current limiting transformer technology. A number of demonstration projects on SFCL were also conducted. In this paper, the research progress of HTS fault current limiters (both AC and DC) in China in recent years is introduced, including the completed projects and the on-going work. The possible application direction of SFCL in the future is proposed.
20 April 2020 in IEEE Transactions on Applied Superconductivity
In this paper, a general scheme of a 40 kV/2 kA resistive type DC superconducting fault current limiter (SFCL) is suggested, which could be utilized to suppress the surge current caused by short-circuit faults in voltage-source-converter HVDC (VSC-HVDC) power grids. This DC SFCL is designed and fabricated with 6 coil modules in parallel and 4 in series. In order to investigate the current-limiting performance of the DC SFCL under the rapidly rising fault current, the SFCL is tested on the platform with a pulsed DC impact generator. Besides the property of current limitation, the current capacity, insulation and quench recovery performance of such SFCL are also tested. Results indicate that the critical current of SFCL is larger than 2050 A at 69 K, and the DC withstand voltage is larger than 74 kV in 2 hours. During the 9kV DC impact test, the short-circuit current could be limited to 8842 A, and the quench recovery time is less than 200ms.
1 February 2018 in IEEE Transactions on Applied Superconductivity
A 1MVA/1MJ superconducting fault current limiter-magnetic energy storage system (SFCL-MES) has been developed. The SFCL-MES utilizes one superconducting coil to both enhance low voltage ride through capability of wind turbine and smooth wind power output. The developed SFCL-MES was installed and put into operation in a wind farm northwest of China. This paper presents final design and test of the four major components of SFCL-MES: power conditioning system, cryogenic system, superconducting coil and monitoring system. Test results of the SFCL-MES are also presented. Test results show that the SFCL-MES has good performance and improves the power quality and reliability of wind power generation successfully.
10 January 2018 in IEEE Transactions on Applied Superconductivity
There are some disadvantages in conventional cryogenic liquid pumps (CLPs) with mechanical bearings, such as difficult lubrication and short working life. In this paper, we propose a new structure of CLP-submerged cryogenic disk motor-pump with superconducting magnetic bearing (SMB). The impeller and the rotor of the disk motor are combined as the suspension rotor of the disk motor-pump. The suspension rotor which is supported by SMB system, rotates frictionlessly with self-stabilized. The SMB system includes a radial-type SMB, an axial-type permanent magnet bearing, and an axial flux disk motor. Theoretical calculations and experimental measurements of levitation forces in the SMB system are carried out. The levitation force of radial-type SMB is calculated by using H -formulation finite-element model in COMSOL. The kinetic model of the suspension rotor is established to ensure the force balance and torque balance. The results demonstrate the feasibility of the proposed submerged cryogenic disk motor-pump with SMB.