Jane P. Chang

Jane P. Chang

Auto-generated profile, based on publicly available information

Jane P. Chang

Department of Chemical and Biomolecular Engineering, University of California 1 , Los Angeles, California 90095

Research Focus & Metrics

Academic Career Length

24Years (2003-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 June 2024 in Journal of Vacuum Science & Technology B
Verified
Journal Article
Open access
PDF file
GOGottlieb S. Oehrlein
Gottlieb S. Oehrlein
SBStephan M. Brandstadter
Stephan M. Brandstadter
RBRobert L. Bruce
Robert L. Bruce
JCJane P. Chang
Jane P. Chang
JDJessica C. DeMott
Jessica C. DeMott
PVPeter L. G. Ventzek
Peter L. G. Ventzek
Plasma etching is an essential semiconductor manufacturing technology required to enable the current microelectronics industry. Along with lithographic patterning, thin-film formation methods, and others, plasma etching has dynamically evolved to meet the exponentially growing demands of the microelectronics industry that enables modern society. At this time, plasma etching faces a period of unprecedented changes owing to numerous factors, including aggressive transition to three-dimensional (3D) device architectures, process precision approaching atomic-scale critical dimensions, introduction of new materials, fundamental silicon device limits, and parallel evolution of post-CMOS approaches. The vast growth of the microelectronics industry has emphasized its role in addressing major societal challenges, including questions on the sustainability of the associated energy use, semiconductor manufacturing related emissions of greenhouse gases, and others. The goal of this article is to help both define the challenges for plasma etching and point out effective plasma etching technology options that may play essential roles in defining microelectronics manufacturing in the future. The challenges are accompanied by significant new opportunities, including integrating experiments with various computational approaches such as machine learning/artificial intelligence and progress in computational approaches, including the realization of digital twins of physical etch chambers through hybrid/coupled models. These prospects can enable innovative solutions to problems that were not available during the past 50 years of plasma etch development in the microelectronics industry. To elaborate on these perspectives, the present article brings together the views of various experts on the different topics that will shape plasma etching for microelectronics manufacturing of the future.

21 April 2005 in Journal of Vacuum Science & Technology A
Verified
Journal Article
Closed access
SLSandy X. Lao
Sandy X. Lao
RMRyan M. Martin
Ryan M. Martin
JCJane P. Chang
Jane P. Chang
A plasma enhanced atomic layer deposition (PEALD) process was developed to deposit high-k dielectric constant materials using alternative metal t-butoxide and oxygen plasma exposures. The deposited thickness increased linearly with an increasing number of precursor/oxygen plasma cycles, and the growth rates of HfO2 and ZrO2 were determined to be 1.1 and 2.8Å∕cycle, respectively. The as-deposited films were determined to be fully oxidized and amorphous by the x-ray photoelectron spectroscopy (XPS) and Fourier transformed infrared spectroscopy (FTIR). The PEALD films were found to have high concentrations of bridging oxygen bonds with metals (M–O–M) as the film thickness increased, in contrast to the high concentrations of M–O–H in the films deposited by plasma enhanced chemical vapor deposition (PECVD). The M–O–M bonds in the PEALD films were further increased upon annealing at 250 °C in atmosphere with a corresponding decrease in M–O–H concentrations, suggesting the elimination of hydroxyl groups upon annealing. The PEALD HfO2 and ZrO2 films showed higher dielectric constants (25, 22) than those of PECVD deposited films (21, 19), likely due to the enhanced ionic contribution from the M–O–M bonds in the PEALD films. The smallest equivalent oxide thickness (EOT) of 13 Å was achieved by PEALD HfO2 with a leakage current density of 0.2A∕cm2, several orders of magnitude below that of thermally grown SiO2 films with the same EOT.

31 March 2014 in Journal of Materials Chemistry A
Verified
Journal Article
Closed access
PDF file
YPYa-Chuan Perng
Ya-Chuan Perng
JCJea Cho
Jea Cho
SSSteven Y. Sun
Steven Y. Sun
DMDaniel Membreno
Daniel Membreno
NCNicolas Cirigliano
Nicolas Cirigliano
JCJane P. Chang
Jane P. Chang
Thin films of a solid electrolyte, lithium aluminosilicate, were synthesized by atomic layer deposition (ALD) for potential applications in 3D Li-ion microbatteries. The films were deposited at 290 °C via alternating the ALD growth of the constituents, LiOH, Al2O3 and SiO2. Manipulation of the cation composition and thickness was achieved through well-controlled surface reactions during each precursor pulse cycle. Various compositions were obtained by changing the number of pulse cycles for each precursor, which enabled lithium aluminate (LixAlyO), lithium aluminosilicate (LixAlySizO) and stoichiometric LiAlSiO4 materials to be prepared. The as-deposited ALD films were amorphous and formed conformal coatings over Si nanowires. Films as thin as 6 nm were found to be free of pinholes. Complex impedance measurements confirmed that the films were ionic conductors with the room temperature conductivity in the range of 10−7 to 10−9 S cm−1 and an activation energy between 0.46 and 0.84 eV, depending upon the film composition.

26 May 2017 in Journal of Vacuum Science & Technology A
Verified
Journal Article
Closed access
JCJack Kun-Chieh Chen
Jack Kun-Chieh Chen
NANicholas D. Altieri
Nicholas D. Altieri
TKTaeseung Kim
Taeseung Kim
ECErnest Chen
Ernest Chen
TLThorsten Lill
Thorsten Lill
JCJane P. Chang
Jane P. Chang
Surface oxidation states of transition (Fe and Co) and noble (Pd and Pt) metals were tailored by controlled exposure to O2 plasmas, thereby enabling their removal by specific organic chemistries. Of all organic chemistries studied, formic acid was found to be the most effective in selectively removing the metal oxide layer in both the solution and vapor phase. The etch rates of Fe, Co, Pd, and Pt films, through an alternating plasma oxidation and formic acid vapor reaction process, were determined to be 4.2, 2.8, 1.2, and 0.5 nm/cycle, respectively. Oxidation by atomic oxygen was an isotropic process, leading to an isotropic etch profile by organic vapor. Oxidation by low energy and directional oxygen ions was an anisotropic process and thus results in an anisotropic etch profile by organic vapor. This is successfully demonstrated in the patterning of Co with a high selectivity over the TiN hardmask, while preserving the desired static magnetic characteristic of Co.

27 February 2023 in Journal of Vacuum Science & Technology A
Verified
Journal Article
Open access
PDF file
TLThorsten Lill
Thorsten Lill
IBIvan L. Berry
Ivan L. Berry
MSMeihua Shen
Meihua Shen
JHJohn Hoang
John Hoang
AFAndreas Fischer
Andreas Fischer
VVVahid Vahedi
Vahid Vahedi
In this article, we give an overview about the chemical and physical processes that play a role in etching at lower wafer temperatures. Conventionally, plasma etching processes rely on the formation of radicals, which readily chemisorb at the surface. Molecules adsorb via physisorption at low temperatures, but they lack enough energy to overcome the energy barrier for a chemical reaction. The density of radicals in a typical plasma used in semiconductor manufacturing is one to two orders of magnitude lower than the concentration of the neutrals. Physisorption of neutrals at low temperatures, therefore, increases the neutral concentration on the surface meaningfully and contributes to etching if they are chemically activated. The transport of neutrals in high aspect ratio features is enhanced at low temperatures because physisorbed species are mobile. The temperature window of low temperature etching is bracketed at the low end by condensation including capillary effects and diminished physisorption at the high end. The useful temperature window is chemistry dependent. Besides illuminating the fundamental effects, which make low temperature processing unique, this article illustrates its utility for semiconductor etching applications.

23 December 2004 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
RPR. Puthenkovilakam
R. Puthenkovilakam
YLY. -S. Lin
Y. -S. Lin
JCJ. Choi
J. Choi
JLJ. Lu
J. Lu
HBH.-O. Blom
H.-O. Blom
JCJ. P. Chang
J. P. Chang
High quality HfO2 films were deposited on p -type Si(100) wafers by an atomic layer deposition scheme. The deposited films were smooth, amorphous, and stoichiometric, as determined by atomic force microscopy, x-ray diffraction, and x-ray photoelectron spectroscopy, respectively. The as-deposited films showed a very small interfacial layer between the HfO2 and silicon. The index of refraction of the film was determined to be slightly smaller than that of bulk HfO2 by spectroscopic ellipsometry. The films annealed in O2 and NH3 at 800°C showed a growth of the interfacial layer, which resembles a SiO2 -rich dielectric layer. Short-range order in the as-deposited films was determined to be monoclinic by the extended x-ray absorption fine structure measurements, and signs of crystallization were observed in the O2 annealed sample. The films appeared to be polycrystalline upon high temperature (800°C) annealing as confirmed by high-resolution transmission electron microscopy. Annealing in the forming gas (450°C) resulted in a more substantial growth of the interfacial layer, though the film remained amorphous.