24 July 2019 in Nature Communications
Rechargeable sodium metal batteries with high energy density could be important to a wide range of energy applications in modern society. The pursuit of higher energy density should ideally come with high safety, a goal difficult for electrolytes based on organic solvents. Here we report a chloroaluminate ionic liquid electrolyte comprised of aluminium chloride/1-methyl-3-ethylimidazolium chloride/sodium chloride ionic liquid spiked with two important additives, ethylaluminum dichloride and 1-ethyl-3-methylimidazolium bis(fluorosulfonyl)imide. This leads to the first chloroaluminate based ionic liquid electrolyte for rechargeable sodium metal battery. The obtained batteries reached voltages up to ~ 4 V, high Coulombic efficiency up to 99.9%, and high energy and power density of ~ 420 Wh kg−1 and ~ 1766 W kg−1, respectively. The batteries retained over 90% of the original capacity after 700 cycles, suggesting an effective approach to sodium metal batteries with high energy/high power density, long cycle life and high safety.
30 November 2022 in Journal of the American Chemical Society
13 June 2024 in ACS Omega
The advancement of water electrolyzer technologies and the production of sustainable hydrogen fuel heavily rely on the development of efficient and cost-effective electrocatalysts for the oxygen evolution reaction (OER). High entropy ceramics, characterized by their unique properties, such as lattice distortion and high configurational entropy, hold significant promise for catalytic applications. In this study, we utilized the sol–gel autocombustion method to synthesize high entropy ceramics containing a combination of 3d transition metals and aluminum ((AlCrCoNiFe2)O). We then compared their electrocatalytic performance with other series of synthesized multimetal and monometallic oxides for the OER under alkaline conditions. Our electrochemical analysis revealed that the high entropy ceramics exhibited excellent performance and the lowest charge transfer resistance, Tafel slope (29 mV·dec–1), and overpotential (η10 = 230 mV). These remarkable results can be primarily attributed to the high entropy effect induced by the addition of Al, Cr, Co, Ni, and Fe, which introduces increased disorder and complexity into the material’s structure. This, in turn, facilitates more efficient OER catalysis by providing diverse active sites and promoting optimal electronic configurations for the reaction. Furthermore, the strong electronic interactions among the constituent elements in the metallic spinels further enhance their catalytic activity in the initiation of the OER process. Combined with the reduced charge transfer resistance, these factors collectively play pivotal roles in enhancing the OER performance of the electrocatalysts. Overall, our study provides valuable insights into the design and development of high-performance electrocatalysts for sustainable energy applications. By harnessing the high entropy effect and leveraging strong electronic interactions, electrocatalytic materials can be tailored to improve efficiency and stability, thus advancing the progress of clean energy technologies.
1 January 2015 in Journal of Nanomaterials
We report plasmon enhanced absorption in dye sensitized solar cells (DSSC) over a broad wavelength range. 45% enhancement in the power conversion efficiency is observed with the inclusion of plasmonic gold nanoparticles (NPs). Photocurrent spectra show enhancement over the entire dye absorption range from 450 nm to 700 nm, as well as in the near infrared (NIR) region above 700 nm due to the strong plasmon‐induced electric fields produced by the gold NPs. The plasmon‐induced electric field distribution of the island‐like gold film is also investigated using finite‐difference‐time‐domain (FDTD) calculations. Furthermore, photoluminescence spectra are performed in order to rule out the mechanism of plasmon energy transfer through Forster resonance energy transfer.
3 September 2014 in RSC Advances
Photocatalytic water splitting has been improved in this work by exploiting a Au/TiO2–Fe2O3 plasmonic cocatalyst system. A 5-fold improvement of water splitting photocurrent was observed in the Au/TiO2–Fe2O3 photoelectrode compared to that of iron oxide only. In order to investigate the enhanced mechanism of this plasmonic cocatalyst system, different plasmonic photoelectrodes were systematically examined under different visible light lasers. The crystallography of the TiO2–Fe2O3 cocatalyst was characterized by high-resolution transmission electron microscopy (HRTEM) and X-ray diffractometer (XRD). UV-visible spectroscopy (UV-vis) was employed to determine the plasmon enhanced absorption of photoelectrodes. In addition, a spatially controllable plasmon enhanced water splitting photocurrent was demonstrated in this study.