11 September 2024 in Nature
4 December 2025 in Nature Communications
In this study, we report the fabrication of a cubic phase SnO2-based thin film gas sensor with excellent sensitivity and selectivity for carbon monoxide (CO) gas at room temperature, with a high response of 25606% achieved at 2 ppm CO gas concentration, and a detection limit down to 1 ppb. Cubic phase SnO2 thin films are synthesized using a simple sol-gel process, followed by spin coating. Our synthesis technique allows for stabilizing the cubic phase of SnO2, confirmed through XRD and TEM studies, which is otherwise reported at high pressures and temperatures. Further, our DFT simulations show that the cubic phase of SnO2 nanoparticles has a lower energy barrier for CO adsorption and desorption than the more common tetragonal phase. The low-voltage and ambient operating conditions of the sensor reported in this study make it highly practical for widespread use, thus offering a promising solution to the growing need for efficient and affordable gas sensing applications, including environmental monitoring, industrial safety, and medical diagnosis.
3 January 2025 in Chemistry of Materials
17 April 2024 in Applied Physics Reviews
Biological neurons are electro-mechanical systems, where the generation and propagation of an action potential are coupled to the generation and transmission of an acoustic wave. Neuristors, such as VO2, characterized by insulator-metal transition (IMT) and negative differential resistance, can be engineered as self-oscillators, which are good approximations of biological neurons in the domain of electrical signals. In this study, we show that these self-oscillators are coupled electro-opto-mechanical systems, with better energy conversion coefficients than the conventional electro-mechanical or electro-optical materials. This is due to the significant contrast in the material's resistance, optical refractive index, and density across the induced temperature range in a Joule heating driven IMT. We carried out laser interferometry to measure the opto-mechanical response while simultaneously driving the devices electrically into self-oscillations of different kinds. We analyzed films of various thicknesses, engineered device geometry, and performed analytical modeling to decouple the effects of refractive index change vis-à-vis mechanical strain in the interferometry signal. We show that the effective piezoelectric coefficient (d13*) for our neuristor devices is 660 ± 20 pm/V, with a 31% internal energy conversion efficiency, making them viable alternatives to Pb-based piezoelectrics for MEMS applications. Furthermore, we show that the effective electro-optic coefficient (r13*) is ∼22 nm/V, which is much larger than that in thin-film and bulk Pockels materials.
24 December 2024 in Research Square
In this study, we report the fabrication of a cubic phase SnO 2 based thin film gas sensor with excellent sensitivity and selectivity for carbon monoxide (CO) gas at room temperature, with a high response of 25606% achieved at 2 ppm CO gas concentration, and a detection limit down to 1ppb. The cubic phase SnO 2 thin films were synthesized via a simple sol-gel method. Our synthesis technique allows for stabilizing the cubic phase of SnO 2 , confirmed through XRD and TEM studies, which is otherwise reported at high pressures and temperatures. Further, our DFT simulations show that the cubic phase of SnO 2 nanoparticles has a lower energy barrier for CO adsorption and desorption than the more common tetragonal phase. The low-voltage and ambient operating conditions of the sensor reported in this study make it highly practical for widespread use, thus offering a promising solution to the growing need for efficient and affordable gas sensing applications, including environmental monitoring, industrial safety, and medical diagnosis.