Machinery is one of the major fields which impacts in the growth of the country. Computer Numerical Control (CNC) plays a vital role in manufacturing machining parts. Each product manufactured from CNC has its own performance index requirements based on its usage. The performance indexes such as surface roughness and geometric tolerances are important for any CNC machined product. The performance index values are affected by several controllable and uncontrollable parameters. Amongst which, the controllable parameters can be tuned to get the desired performance index values. Hence, in this work, we proposed an intelligent prediction model to predict the performance index values such as surface roughness and geometric tolerances considering the controllable machining parameters as the input for the model. The experimental results show that the performance index can be predicted effectively with various CNC machining parameters. Therefore, the model can be useful for the manufacturers for achieving the desired performance index values.
Contact deformations and structural deformations are inherent in a fixture-workpiece system, resulting in dimensional and form inaccuracies in machined components. During metal removal, the mass and compliance of the workpiece vary in different proportions depending on the volume and geometry of metal removal. This leads to a gradual increase in workpiece deformations and a shift in the natural frequencies (ωn) from that of the initial unmachined workpiece. This causes a change in dynamic magnification factor (transmissibility) and vibration amplitudes. Thus, as machining progresses, the undesirable workpiece deformations and inaccuracies creep in, particularly in solid workpieces involving substantial metal removal and thin-walled workpieces. Accurate identification of changing dynamic behavior in the workpiece and control of these vibrations can maintain machining quality and productivity. In this work, we have developed a fully numerical approach to track and quantify the frequency shift and counter its effect by tweaking the clamping and cutting forces of the fixture-workpiece assembly. To validate the numerically obtained values of natural frequencies, experiments are performed on an electrodynamic shaker at different stages of pocket milling and for various clamping pressures. The natural frequencies obtained numerically show good agreement with experimental values, with a maximum error of ±10%. Subsequently, the effect of metal removal on workpiece vibrations is presented for different pocket geometries and clamping pressures. Finally, to control increasing vibrations due to decreasing workpiece stiffness, a compensation scheme is presented based on the manipulation of clamping pressures.