Electrochemical Energy Conversion and Storage Systems Group, Institute for Power Electronics and Electrical Drives (ISEA), RWTH Aachen University, 52066 Aachen, Germany
Auto-generated profile, based on publicly available information
Johannes Schmalstieg
Electrochemical Energy Conversion and Storage Systems Group, Institute for Power Electronics and Electrical Drives (ISEA), RWTH Aachen University, 52066 Aachen, Germany
Physico-chemical models are key for a successful use of lithium-ion batteries, especially under extreme conditions. For correctly simulating of the internal battery states and battery aging a suitable set of material properties is needed. This work presents methods to extract these parameters from commercial cells and demonstrates them analyzing a high-power prismatic cell. In a first step, the electrolyte analysis is described, followed by an examination of the active material. The composition as well as the porous structure are measured using optical emission spectroscopy and Hg-porosimetry. To determine the electrochemical properties of the electrode materials, coin cells with lithium as counter electrode are build. With these test cells, open circuit voltage curves and galvanostatic intermittent titration technique measurements are performed to determine the electrode balancing as well as the diffusion constants of the active material. Electrochemical impedance spectroscopy experiments on the full cell are used to determine the charge transfer. In the second part of this paper, a determination of the thermal parameters as well as a validation for the complete parameterization are described.
10 December 2018 in Journal of the Electrochemical Society
Physico-chemical models allow a deep view into the internal processes and states of lithium-ion batteries. A crucial part of such models is the correct parameterization of the cell under consideration. In the first part of this publication methods to determine physical and electrochemical parameters are described and the experimental results from a PHEV cell are given. As the cell shows significant self-heating, a simple thermal model is introduced and the thermal parameters of the cell are determined. After a summary of all identified parameters a validation of these input data and the model is given. A wide range of measurements is compared to simulation results. This includes discharges at different temperatures and current rates as well as pulse tests and a realistic driving profile.