Institute for Applied Materials - Microstructure Modelling and Simulation (IAM-MMS), Karlsruhe Institute of Technology (KIT) 1 , Strasse am Forum 7, 76131 Karlsruhe
Auto-generated profile, based on publicly available information
Lisen Bi
Institute for Applied Materials - Microstructure Modelling and Simulation (IAM-MMS), Karlsruhe Institute of Technology (KIT) 1 , Strasse am Forum 7, 76131 Karlsruhe
In order to gain a deeper knowledge of the heat and mass transfer processes in the case of starchy fruits and vegetables during microwave drying, we have conducted an experimental study based on a developed microwave apparatus for drying potato. The changes in the temperature, drying rate, moisture content, thermal parameters, moisture state and distribution of the potatoes samples during the microwave drying process were obtained. The results show that, according to the temperature changes of the samples dried at different microwave powers (600 W, 800 W, 1000 W), the microwave drying process can be divided into three stages: heating stage, constant temperature stage, and cooling stage. The moisture content reduction of the samples in the constant temperature stage accounted for more than 90% of the total reduction. Meanwhile, as the microwave drying process goes by, the thermal conductivity and thermal diffusivity of the samples both decrease first and then increase, while the volumetric heat capacity presents an opposite trend. Moreover, the range and amplitude of transverse relaxation time of the samples reduce over the drying time, which confirms the existence of massive, outward moisture-migration in the dried samples. The loss of the weakly bound water in the moisture-migration, which is closely related to the starch, has a significant effect on the heat and mass transfer in the dried samples.
To study the evaporation characteristics of nanodroplets on substrates with different rough structures, molecular dynamics simulations have been performed. Based on the Wenzel wetting model, three systems with different rough structures were constructed, in which the ratios of contact area (RCA) between substrates and nanodroplets were 33.3%, 50% and 66.6%, respectively.The results indicate that the evaporation pattern of the nanodroplet in the system with RCA = 33.3% is the mixed mode, the evaporation pattern of the nanodroplet in the system with RCA = 50% is the constant-contact-radius mode, and the evaporation pattern of the nanodroplet in the system with RCA = 66.6% is the constant-contact-angle mode. Meanwhile, when the temperature of substrates (T) is suddenly raised from 0.67 ε/kB to 0.83 ε/kB, followed by a corresponding rise of the temperature of nanodroplets, we find that the temperature-rise and evaporation rates of the nanodroplets increase with the increase of RCA in this period. Changes in RCA leading to the changes in substrate wettability affects the heat transfer between nanodroplets and substrates. In particular, the more wettable the substrate, the higher the heat transfer efficiency. Moreover, the wettability of the substrate in the systems with RCA = 50% and 66.6% promotes the heat and mass transfer in the three-phase contact line region of the nanodroplets during the evaporation process, while the non-wettability of the substrate in the system with RCA = 33.3% suppresses the local heat and mass transfer.
When a droplet is deposited on a rough solid substrate, the classic Cassie-Wenzel theory (CWT) is often used to describe the wetting states. However, CWT fails to explain experimental observations of high static friction on hydrophobic surfaces with a critical roll-off angle close to 90 ∘ ; the static friction is associated with the minimum energy required for the transition between the Cassie state and the Wenzel state. Here, we propose an alternative theory for calculating the static friction force of a droplet on a rough solid surface, based on a complete energy landscape method. Our results for static friction are orders of magnitude larger than those predicted by CWT and have been validated through quantitative comparisons with experiments.
Surface morphology is widely recognized to influence wetting behavior; however, a comprehensive understanding of how specific morphological factors govern the Cassie–Wenzel transition remains incomplete. In this work, building on a bivariate energy-minimization framework, we focus on a key structural design parameter characterizing individual surface defects and systematically investigate its effect—both independently and in conjunction with surface defect density—on three critical aspects of the Cassie–Wenzel transition: wettability, energy barrier, and static friction. Our results demonstrate that this structural design parameter exerts distinct influences on the Cassie–Wenzel transition, depending on the wetting type: in type A, the Wenzel state is energetically favored, while in type B, the Cassie state represents the global energy minimum. These findings reveal that this parameter modulates the stability and reversibility of wetting states, as well as droplet mobility, through nontrivial energy landscapes. Moreover, we uncover a previously unreported non-monotonic dependence of static friction on the morphological factors, which we attribute to a geometric constraint on the contact angle of the transition state. We anticipate that our findings can offer quantitative design guidelines for engineering surfaces with tunable wettability and droplet transport properties.