9 June 2020 in IEEE Transactions on Energy Conversion
In this paper, a rotor magnetic potential (RMP) model is proposed, which can accurately describe the rotor surface magnetic potential distribution under the interaction of multi-excitation sources. Furthermore, a new magnetic equivalent circuit (MEC) model is used to model the complex saturation in the bridge region, which employs an improved nonlinear reluctance modeling method. Then, the unknown parameters in the RMP model are obtained by solving the MEC model. In this paper, the RMP model and MEC model are combined to consider the stator and rotor saturation effects, and the magnetic field is calculated accurately. Compared with the existing RMP model, the proposed one can take into account the effects of the stator saturation and PM magnetic field. Compared with the existing MEC and equivalent magnetic network (EMN), the area of the nonlinear reluctance in this paper varies with excitation conditions, which can accurately consider the saturation effects in the bridge region. This improvement can improve calculation accuracy on the basis of reducing the number of nonlinear reluctances. Moreover, the proposed method does not need to consider the change of the air-gap reluctances caused by rotor rotation. Finally, the proposed method is verified by both finite element analysis and experiments.
10 September 2021 in IEEE Transactions on Magnetics
There are many space harmonics in the stator magnetomotive force (MMF) of fractional-slot concentrated winding (FSCW). These harmonics will produce high eddy current losses in the permanent magnet (PM), which will reduce motor efficiency and affect motor performance. Aiming at the above problems, the harmonic components of traditional stator MMF are first analyzed in this article, and then, a novel space-shifted unequal-turn winding structure is proposed for dual three-phase fractional-slot permanent magnet synchronous motors (PMSMs). Meanwhile, the sub- and super-harmonics in the stator MMF can be simultaneously eliminated using the proposed winding structure. To verify the effectiveness of the proposed structure, an 18-slot/8-pole motor and a 30-slot/14-pole dual three-phase fractional-slot PMSM with low space harmonic are designed by using the proposed space-shifted unequal-turn winding structure based on the analysis of nine-slot/eight-pole and 15-slot/14-pole motors. Finally, by comparing the finite element analysis (FEA) results, it is verified that the dual three-phase PMSM motor with the proposed structure has smaller eddy current losses in PM and better motor performance.
24 July 2019 in IEEE Transactions on Magnetics
1 December 2021 in IEEE Transactions on Magnetics
Stator and rotor cores of interior permanent magnet (IPM) motors are usually saturated, and the saturation distribution and saturation depth vary with the stator current. Also, their rotor structures are complex; hence, the saturation cannot be accurately reflected by a saturation factor. These considerations lead to the existing equivalent air-gap length models of induction motors and inset permanent magnet (PM) motors no longer suitable for IPM motors. Therefore, based on the consideration of stator and rotor saturation, this article proposes the equivalent air-gap length model of IPM motors expressed by magnetic potentials on the stator inner surface and the rotor outer surface. The proposed equivalent air-gap length model can accurately reflect the influences of complex structure and severe saturation of IPM motors. Compared with the existing models, the proposed one is no longer uniquely determined by motor structure parameters; it is also a function of stator current and rotor position. Furthermore, the obtained equivalent air-gap length model is combined with the winding function and the modified winding function to solve the inductances under different stator currents and different rotor eccentricity states. Finally, the proposed method is verified by both finite element analysis (FEA) and experiments.
28 June 2021 in IEEE Transactions on Magnetics
In this article, the rotor magnetic potential (RMP) model of spoke-type machines is proposed, which can accurately describe rotor surface magnetic potential distribution. No-load and load magnetic fields are calculated by using the proposed RMP model. In order to accurately establish and solve the RMP model, the magnetic field in the machine is divided into the $d$ -axis magnetic field and the $q$ -axis magnetic field. Then, corresponding $d$ - and $q$ -axis RMP models are proposed, which can consider the saturation of the bridge region and the dq -axis cross-coupling. The unknown parameters in $d$ - and $q$ -axis RMP models are then obtained using simple lumped magnetic circuit (LMC) models. Furthermore, the total RMP model can be obtained by superimposing the above $d$ - and $q$ -axis RMP models. The modeling process proposed in this article is intuitive and straightforward, and it has fewer variables to be solved. Moreover, the proposed method does not need to consider the change of the relative position between the stator and rotor caused by rotor rotation. Finally, the FEA is used to validate the validity of the proposed method.