19 May 2022 in Aerospace Science and Technology
25 July 2024 in Journal of Fluid Mechanics
The unsteady mechanism of unstart flow for an inlet with rectangular-to-elliptical shape transition (REST) under the off-design condition at a Mach of 4 is investigated using the delay detached eddy simulation method. With the help of numerical simulations, the unsteady dynamics, especially the low-frequency characteristics of the REST inlet unstart flow, as well as the self-sustaining mechanism, is investigated. The instantaneous flow illustrates the unsteady phenomena of the REST unstart flow, including the interaction between the cowl-closure leading edge (CLE) shock and the shear layer, breathing of the separation bubble, flapping of the separation shock, instability of the shear layer and vortex shedding along the shear layer. The spectral analysis reveals that the lower frequency dynamics is associated with the breathing of the separation bubble and the flapping motion of the separation shock wave, while the higher frequency is related to the instability of the shear layer affected by cowl-closure leading edge shock and the formation of shedding vortices. Further, coherence analysis shows that the contribution of these flow structures dominating the low-frequency dynamics couple with each other. Based on the dynamic mode decomposition results, the characteristics that contribute to the unsteady behaviour of unstart flow are summarized. The streamwise vortices downstream of the separation and the shedding vortices are believed to be the main driving force of the global low-frequency unsteadiness of the REST inlet unstart flow under the off-design condition. Moreover, the CLE shock plays an important role in the process during the dominant flow structure conversion from the backflow within the separation bubble into elongated streamwise structures.
26 September 2023 in Journal of Fluid Mechanics
A highly compressive effect would suppress the mixing of the shear layer in a convex wall jet. The spanwise distributed protrusions at the nozzle lip are employed to achieve mixing enhancement in this study. The mixing characteristics and enhancement mechanisms are numerically investigated by the delayed detached-eddy simulation method based on the two-equation shear-stress transport model. A widely applicable flow spatiotemporal analysis method, called proper orthogonal decomposition (POD), is used to gain further insight into the dynamical behaviours of the flow instability mode. The results reveal that the centrifugal effect maintains and amplifies the initial perturbations induced by the spanwise distributed heterogeneities, resulting in forced streamwise vortices. The instabilities induced by the streamwise vortices significantly increase the growth rate of the jet half-width and the shear layer vorticity thickness. The spanwise wavelength of the streamwise vortices is consistent with the spanwise distributed forced excitation. In addition, the spanwise meandering motion of the streamwise vortices is observed, which is usually associated with the streamwise travelling wave. This is further confirmed by the POD analysis of the spanwise velocity fluctuation in both stream-radial and stream-span sections. Also, the spatial distributions of the POD modes with the highest energy provide information on the secondary instability modes. Both sinuous and varicose types of disturbances are observed in the unforced jet, whereas the forced jet seems to be dominated by the sinuous type instability, which is more easily excited than the varicose type instability. Moreover, the turbulence intensity in the forced jet is also significantly enhanced as expected due to the earlier and stronger streamwise vortices and associated instabilities. The enhanced turbulent characteristics of the highly compressible condition tend to be isotropic, whereas in the unforced jet, it is anisotropic due to the strong compressibility suppressing the spanwise turbulent fluctuations.
1 March 2025 in Physics of Fluids
Numerical study was carried out to investigate the effect of the pressure relief slot on the start property of a hypersonic inlet. By setting the pressure relief slot on the compression wall, the inlet start property can be significantly improved. The mechanism of the pressure relief slot on improving the start property and the influence of the parameters of the slot operating efficiency were summarized. By bleeding the back flow within the bubble and decreasing the backpropagation of the back pressure, the separation region can be divided into several parts, and thus, the flow separation is limited and the size of the bubble is reduced. Meanwhile, the suction effect of the low-speed and low-momentum flow within the boundary layer enhanced the airflow against the flow separation, which is beneficial to delay the inlet unstart. On the other hand, the results revealed that the inlet start property is sensitive to the slot parameters. The location is the most important parameter which decides the way that the separation bubble is divided and the type of shock/boundary interaction in the internal contraction part. By increasing the slot amount, the start property can also be significantly promoted only if the slot location is reasonable. In contrast, the width and the aspect ratio show weak influence on the start property. Therefore, the slots should be arranged carefully based on the location of the cowl and separation bubble.
8 April 2026 in Aerospace Science and Technology
1 September 2026 in Physics of Fluids
The supersonic Coandă jet is a pivotal active flow control technique whose performance is closely tied to the evolution of shear layer mixing. Spanwise-distributed protrusions on the nozzle lip have been proven to significantly modulate mixing behavior, yet the influence mechanism of protrusion parameters (i.e., spacing and geometry) remains poorly understood. To address this research gap, the present study numerically investigates the effects of protrusion spacing (quantified as forcing wavelength λ) and geometry on the jet mixing characteristics, adopting the delayed detached-eddy simulation based on the two-equation shear stress transport k–ω turbulence model. The results reveal that protrusions induce initial streamwise vortices immediately downstream of the nozzle exit, which entrain ambient fluid and radially transport high-momentum core fluid, thus dominating the entire shear layer mixing process. The efficacy of this vortex-induced mixing enhancement depends strongly on vortex scale: larger vortices have longer persistence and a wider influence range, thus enabling more effective mixing. The vortex scale is directly determined by the imposed forcing wavelength. The effective wavelength initially coincides with the forcing wavelength, but evolves into three distinct development modes downstream: the self-sustaining mode occurs at longer forcing wavelengths (λ = 2h and 4h), while splitting or merging modes are observed at shorter forcing wavelengths (λ = 1h and 0.5h). Although vortex splitting and merging modify the effective wavelength, the eventual wavelength remains smaller than that of the unforced baseline case. Meanwhile, an excessively large forcing wavelength (λ = 4h) can induce unintended main flow deviation from the wall, which degrades overall mixing performance. Consequently, an optimal forcing wavelength exists (i.e., λ = 2h in the present study) that yields the maximum mixing efficiency. Furthermore, despite differences in vortex evolution at short forcing wavelengths, mixing characteristics are nearly identical for different protrusion geometries when the effective wavelength is the same. The only exception is triangular protrusions, which deliver inferior mixing performance due to the weaker initial flow perturbations they induce.