Thuc Phi Duong

Thuc Phi Duong

Auto-generated profile, based on publicly available information

Thuc Phi Duong

Department of Electronics Engineering, Information and Communication System-on-Chip (SoC) Research Center, Kyung Hee University, 1732 Deogyeong-daero, Giheung, Yongin 17104, Gyeonggi-do, Republic of Korea

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 July 2015 in Energies
Verified
Journal Article
Open access
PDF file
TDThuc Phi Duong
Thuc Phi Duong
JLJong-Wook Lee
Jong-Wook Lee
To enable the geometrical freedom envisioned for wireless power transfer (WPT), fast dynamic adaptation to unpredictable changes in receiver position is needed. In this paper, we propose an adaptive impedance-searching system that achieves good impedance matching quickly. For fast and robust operation, the proposed method consists of three steps: system calibration, coarse search, and fine search. The proposed WPT system is characterized using distance variation and lateral and angular misalignment between coils. The measured results indicate that the proposed method significantly reduces searching time from a few minutes to approximately one second. Furthermore, the proposed system achieves impedance matching with good accuracy. The robust impedance-searching capability of the proposed system significantly improves power transfer efficiency. At 6.78 MHz, we achieve a maximum efficiency of 89.7% and a high efficiency of >80% up to a distance of 50 cm. When the center-to-center misalignment is 35 cm, the efficiency is improved from 48.4% to 74.1% with the proposed method. At a distance of 40 cm, the efficiency is higher than 74% for up to 60° of angular rotation. These results agree well with the simulated results obtained using a lumped-element circuit model.

7 April 2025 in Sensors
Verified
Journal Article
Open access
PDF file
TDThuc Phi Duong
Thuc Phi Duong
NPNgoc Hung Phi
Ngoc Hung Phi
BABilal Ahmad
Bilal Ahmad
SJSasani Jayasekara
Sasani Jayasekara
JLJong-Wook Lee
Jong-Wook Lee
With a quickly increasing number of Internet of Things (IoT) involving different power levels, wireless power transfer (WPT) systems need the capability to deliver energy to multiple receivers simultaneously. The nonuniform powering of multiple receivers is also necessary, considering the different power levels that IoT sensors demand. This paper investigates asymmetric resonant coupling WPT systems for powering multiple receivers. We propose a simple method for achieving the specified power ratio of the multiple receivers using the equivalent circuit model and reflected impedance technique. The results are generalized for a system with an N number of multiple receivers. Experiments are performed for powering two receivers with power ratios of 1.5 and 2.5, which achieve a power transfer efficiency of 91.7% and 88.6%, respectively. Another experiment performed for powering four receivers, which have power ratios of 1.0, 1.5, 2.0, and 0.75, shows an efficiency of up to 89.9%, which agrees well with the simulation result. Our result shows that the distance between the source loop and the transmitting resonator can be varied to maximize efficiency without altering the power division.