26 September 2013 in Optics Letters
We present a method for determining the core and cladding refractive indices of a microring resonator from its measured quasi-transverse electric and magnetic resonant modes. We use single wavelength reflective microrings to resolve the azimuthal order ambiguity of the measured resonances. We perform accurate electromagnetic simulations to model the dependence of the resonances on geometrical and material parameters. We linearize the model and use the singular value decomposition method to find the best fit parameters for the measured data. At 1550 nm, we determine for stoichiometric silicon nitride deposited using low-pressure chemical vapor deposition (LPCVD) technique and for plasma-enhanced chemical vapor deposition (PECVD) oxide. By measuring the temperature sensitivities of microring resonant modes with different polarizations, we find the thermo-optic coefficient of the stoichiometric silicon nitride to be and the PECVD oxide to be .
3 December 2020 in Light: Science & Applications
Direct laser writing (DLW) has been shown to render 3D polymeric optical components, including lenses, beam expanders, and mirrors, with submicrometer precision. However, these printed structures are limited to the refractive index and dispersive properties of the photopolymer. Here, we present the subsurface controllable refractive index via beam exposure (SCRIBE) method, a lithographic approach that enables the tuning of the refractive index over a range of greater than 0.3 by performing DLW inside photoresist-filled nanoporous silicon and silica scaffolds. Adjusting the laser exposure during printing enables 3D submicron control of the polymer infilling and thus the refractive index and chromatic dispersion. Combining SCRIBE’s unprecedented index range and 3D writing accuracy has realized the world’s smallest (15 µm diameter) spherical Luneburg lens operating at visible wavelengths. SCRIBE’s ability to tune the chromatic dispersion alongside the refractive index was leveraged to render achromatic doublets in a single printing step, eliminating the need for multiple photoresins and writing sequences. SCRIBE also has the potential to form multicomponent optics by cascading optical elements within a scaffold. As a demonstration, stacked focusing structures that generate photonic nanojets were fabricated inside porous silicon. Finally, an all-pass ring resonator was coupled to a subsurface 3D waveguide. The measured quality factor of 4600 at 1550 nm suggests the possibility of compact photonic systems with optical interconnects that traverse multiple planes. SCRIBE is uniquely suited for constructing such photonic integrated circuits due to its ability to integrate multiple optical components, including lenses and waveguides, without additional printed supports.
28 September 2012 in Light: Science & Applications
We present epi-diffraction phase microscopy (epi-DPM) as a non-destructive optical method for monitoring semiconductor fabrication processes in real time and with nanometer level sensitivity. The method uses a compact Mach–Zehnder interferometer to recover quantitative amplitude and phase maps of the field reflected by the sample. The low temporal noise of 0.6 nm per pixel at 8.93 frames per second enabled us to collect a three-dimensional movie showing the dynamics of wet etching and thereby accurately quantify non-uniformities in the etch rate both across the sample and over time. By displaying a gray-scale digital image on the sample with a computer projector, we performed photochemical etching to define arrays of microlenses while simultaneously monitoring their etch profiles with epi-DPM.
26 February 2014 in Optics Express
Quantitative phase imaging systems using white light illumination can exhibit lower noise figures than laser-based systems. However, they can also suffer from object-dependent artifacts, such as halos, which prevent accurate reconstruction of the surface topography. In this work, we show that white light diffraction phase microscopy using a standard halogen lamp can produce accurate height maps of even the most challenging structures provided that there is proper spatial filtering at: 1) the condenser to ensure adequate spatial coherence and 2) the output Fourier plane to produce a uniform reference beam. We explain that these object-dependent artifacts are a high-pass filtering phenomenon, establish design guidelines to reduce the artifacts, and then apply these guidelines to eliminate the halo effect. Since a spatially incoherent source requires significant spatial filtering, the irradiance is lower and proportionally longer exposure times are needed. To circumvent this tradeoff, we demonstrate that a supercontinuum laser, due to its high radiance, can provide accurate measurements with reduced exposure times, allowing for fast dynamic measurements.
11 November 2019 in Nanoscale Advances
This article gives a thorough and unprecedented review that presents new perspectives, unusual physics, and exciting trends for photonic nanojets.
7 June 2021 in Photonics Research
Microwave photonics, a field that crosscuts microwave/millimeter-wave engineering with optoelectronics, has sparked great interest from research and commercial sectors. This multidisciplinary fusion can achieve ultrawide bandwidth and ultrafast speed that were considered impossible in conventional chip-scale microwave/millimeter-wave systems. Conventional microwave-to-photonic converters, based on resonant acousto-optic modulation, produce highly efficient modulation but sacrifice bandwidth and limit their applicability for most real-world microwave signal-processing applications. In this paper, we build highly efficient and wideband microwave-to-photonic modulators using the acousto-optic effect on suspended lithium niobate thin films. A wideband microwave signal is first piezoelectrically transduced using interdigitated electrodes into Lamb acoustic waves, which directly propagates across an optical waveguide and causes refractive index perturbation through the photoelastic effect. This approach is power-efficient, with phase shifts up to over a 45 μm modulation length and with a bandwidth up to 140 MHz at a center frequency of 1.9 GHz. Compared to the state-of-the-art, a more efficient modulation has been achieved by optimizing the acoustic and optical modes and their interactions.