16 January 2026 in Science Advances
Current dental care relies on subjective assessments or sophisticated diagnostics, both struggling to balance efficiency and accuracy. In situ biosensors offer a promising solution for real-time biomarker detection, yet their practical deployment in oral tissue is hindered by challenges in sensitivity, specificity, and stability due to low biomarker concentrations, molecular-level heterogeneity, and dynamic intraoral interactions. Here, we develop a tissue-adhesive hydrogel–MXene (TAHM) biosensor, integrating a graphene/MXene sensing probe, a tissue-adhesive patch, and a selective-permeable hydrogel membrane, for in situ detection of tumor necrosis factor–α, a proinflammatory cytokine. Our TAHM biosensor achieves high sensitivity with a limit of detection of 18.2 femtograms per milliliter, excellent selectivity with an interference coefficient below 7%, and mechanical stability with resistance variation under 0.5% under varying stretch ratio and loading rates. The sensor’s performance is further validated through in vitro, in vivo, and ex vivo experiments. The work highlights the potential of in situ biosensor as a transformative tool for real-time oral diagnostics.
1 August 2025 in Journal of Materials Chemistry B
Mechanical strain is introduced as a programmable cue to regulate hydrogel degradation in situ, enabling next-generation scaffold development for controlled drug release and tissue remodeling.
24 April 2026 in Proceedings of the National Academy of Sciences
Photosynthetic biomanufacturing offers a sustainable route to generate valuable bioproducts by harnessing microorganisms such as algae to convert sunlight and carbon dioxide into biomass. A major barrier to efficient production is that light penetrates poorly into dense algal cultures, restricting photosynthesis to a thin surface layer and severely limiting the solar energy that can be utilized for algal growth and biomass production. Here, we present a material-based strategy to overcome this fundamental bottleneck by deploying bulk-scattering, index-matched optical fibers that redistribute sunlight uniformly throughout the culture volume. These fibers are made from amorphous hydrogels with a refractive index closely matched to that of algal media and contain scattering nanoparticles that redirect light to achieve volumetric illumination. When integrated into solar-powered algal systems, the fibers enable dense and sustained algal growth at 0.8 to 1.4 g L −1 over 2 mo of semicontinuous outdoor cultivation, resulting in volumetric biomass productivity of 0.15 g L −1 day −1 and photosynthetic efficiency of 1.4%, significantly higher compared to algal systems without fibers. This study demonstrates the transformative potential of optical modulation to the long-standing low productivity in dense algal culture, providing a scalable, sustainable, and efficient pathway for solar-driven biomanufacturing.
20 August 2026 in Advanced Science
Molecular transport through polymer networks, including hydrogels and biological matrices, underpins many applications ranging from water filtration and gas separation to drug delivery and cell culture. Conventional strategies for regulating transport in polymer networks primarily focus on tuning molecular diffusion through network mesh size and polymer chemistry, whereas convection is often considered negligible because nanoscale‐mesh networks typically exhibit low fluid permeability. Although hydraulic pressure is a well‐established driving force for convection in porous media, extending pressure‐driven convection to non‐porous polymer networks has remained fundamentally challenging because they can undergo substantial deformation or fracture under pressure gradients. Here, we demonstrate that hydraulic pressure applied across mechanically tough and grid‐supported hydrogels enables robust and tunable solute transport while maintaining structural integrity. The characteristic transport time can be experimentally modulated by up to 65‐fold, consistent with a coupled diffusion–convection model. Beyond tuning transport kinetics, applied pressure enhances size‐ and charge‐dependent transport selectivity by up to 5.4‐fold compared to pressure‐free conditions. As a proof of concept, we demonstrate pressure‐programmed antimicrobial delivery that dynamically controls doxorubicin transport while blocking bacterial penetration. These findings identify pressure‐regulated convection as an underexplored mechanism for controlling transport in polymer networks.
13 April 2026 in ACS Materials Au
Conventional silica-based optical fibers provide one-dimensional (1D) point-to-point light transmission, enabling illumination only at the distal end and offering limited control over the spatial distribution of light intensity. In contrast, three-dimensional (3D) waveguide architectures have the potential to convert a single-point input into multipoint, spatially distributed illumination, enabling volumetric light–matter interactions. However, fabrication of optically transparent silica waveguides with complex 3D geometries remains challenging due to material constraints and manufacturing complexity. In this work, a wide range of polymer waveguide architectures are designed and fabricated using commercially available stereolithographic (SLA) 3D printing. Optical characterization demonstrates high transparency and effective light confinement in the printed polymer materials. We identify postprint surface finishing as a primary factor governing light transmission efficiency, achieving a 3.6-fold increase in transmittance compared to unfinished prints. In addition, geometric parameters were systematically investigated to determine their impact on light preservation. Smaller diameters, shorter lengths, reduced branching angles, and smoothly curved junctions are found to minimize optical losses in Y-shaped waveguide architectures. Building on these design principles, we further demonstrate that multibranch and multilayer architectures enable uniform light distribution in both linear and planar configurations. These 3D-printed multibranch waveguides provide a general strategy for efficient light delivery in light-absorbing environments. As a representative application, embedding multibranch waveguides within dense microalgal cultures redistributed light throughout the strongly absorbing aquatic environment, mitigating light attenuation and enhancing biomass productivity. These results together establish a geometry-engineered optical redistribution platform that enables 3D spatial light delivery beyond conventional point-to-point waveguiding.