30 March 2022 in IEEE Transactions on Electron Devices
This research article proposes a floating memristor emulator configuration based on n-type MOSFETs only. The proposed memristor comprises three nMOS and an extra nMOS for an external grounded capacitor. Compared to the existing literature, the proposed floating MOS memristor enables a simple design without any sophisticated design complexity. The actual fingerprint of the memristor as a pinched hysteresis loop with different frequency domains and composite characteristics as incremental and decremental are well examined using computer simulation with 90-nm CMOS technology parameters for MOSFETs. The power consumed by the proposed circuit is $2.6~\mu \text{W}$ . In addition, an experimental test using off-the-shelf components is investigated to verify the theoretical and simulated results. Moreover, the proposed nMOS-memristor emulator application is suitable for the modulation and demodulation of binary frequency-shift keying (BFSK) and Boolean logic gates.
11 July 2022 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
The design of the memristor emulator, which has found widespread of applications in analog computation, neuromorphic and biological systems, communications, etc., is much sought for. In this article, a resistorless electronically tunable grounded and floating memristor emulator by employing current-mode (CM) building blocks: operational transconductance amplifier (OTA) and voltage differencing buffered amplifier (VDBA) has been proposed. The proposed emulators can be configured as incremental and decremental operations. The robustness of the proposed emulator has been verified by performing various analyses: nonideal interpretations, process corner variations, temperature fluctuations, and nonvolatility behavior. The layout has been performed, and the theoretical fingerprint characteristics have been simulated and observed using 180-nm CMOS process parameters in the Cadence environment. The pinched hysteresis loop of the proposed memristor emulator maintains up to 5 MHz. The proposed memristor emulator uses less number of circuit components, but it maintains performance in terms of speed and operating range of frequency. Binary frequency shift keying (BFSK) has been performed using the proposed memristor to validate its functionality in the application. This memristor emulator with superior performance can be integrated into the communication system, analog computation, neuromorphic and biological systems, etc.
5 January 2021 in Microelectronics Journal
20 February 2025 in IEEE Open Journal of Nanotechnology
This study describes a VDBA (Voltage Differencing Buffered Amplifier)-based memristor emulator and its use in an instrumentation amplifier for biomedical applications. The proposed grounded and floating memristor has been implemented using a single VDBA and grounded MOS-Capacitor. The VDBA used in this article has also been designed and uses eighteen transistors only. The proposed memristor emulator can be operated in both decremental and incremental modes. The suggested emulator's robustness has been verified using a variety of evaluations, including non-ideal inspection, variations of process corner, temperature swings, and non-volatility performance. Using 45nm CMOS process parameters in the Cadence environment, the layout has been accomplished, and simulations and observations of the theoretical fingerprint characteristics have been made. The incremental and decremental mode of operation for grounded/floating memristor can be easily obtained by modifying the circuit slightly. The shape of the pinched-hysteresis loop is maintained up to 5MHz. The functionality of the proposed memristor has also been tested by integrating it with the Instrumentation amplifier to amplify weak bio-medical signals.