Zixiang Yu

Zixiang Yu

Auto-generated profile, based on publicly available information

Zixiang Yu

School of Electrical and Automation Engineering, Hefei University of Technology, Hefei, China

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 June 2018 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
XRXiang Ren
Xiang Ren
Luo ShuangshuangLuo Shuangshuang
Luo Shuangshuang
RQRonghai Qu
Ronghai Qu
ZYZixiang Yu
Zixiang Yu
Yuting GaoYuting Gao
Yuting Gao
In recent years, permanent magnet vernier (PMV) machines are attracting more and more attentions owing to their high torque density. The spoke array magnet is widely used in the regular PM machine to improve working flux density. However, the flux barrier effect of spoke array magnet for the PMV machine has been proved, and a large torque reduction may be introduced in the spoke array PMV machine. In this paper, a novel spoke array PMV machine is proposed to improve working flux density and the torque density of PMV machines. The alternate magnetic bridges are added in the rotor core to connect iron pieces with same polarity and provide magnetic circuit for the low-pole number working magnetic field, hence the no-load back EMF and output torque of the proposed machine can be significantly improved. Moreover, analytical airgap flux density distribution based on equivalent magnetic circuit is presented to reveal the mechanism of working flux density improvement, and finite element analysis (FEA) is used to investigate the performance features and structure parameter influence on the key performances, viz. back EMF and torque, of the proposed machine. Finally, a 25Nm prototype has been built and tested to validate these analyses.

2 October 2018 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
KXKangfu Xie
Kangfu Xie
Luo ShuangshuangLuo Shuangshuang
Luo Shuangshuang
RQRonghai Qu
Ronghai Qu
ZYZixiang Yu
Zixiang Yu
Yuting GaoYuting Gao
Yuting Gao
YPYuan Pan
Yuan Pan
Flux reversal permanent magnet (FRPM) machine, with magnets mounted on or inserted into the stator, is favorable for the direct drive applications. In this paper, a FRPM machine with Quasi-Halbach array magnets in stator slot opening is introduced. The operation principle of the proposed machine is presented, and the combination of stator and rotor slot number is given. Several key parameters, that are split ratio, stator and rotor slot opening ratio, magnet ratio and magnet thickness are carefully investigated, while four proposed FRPM machines with 12 stator slots and 10, 11, 13, 14 rotor slots are optimized for better performance. Moreover, the proposed FRPM machine is compared with a conventional FRPM machine, the analysis results indicate that the torque density of proposed machine is 2.2 times that of the conventional FRPM machine under the same copper loss with almost the same magnet usage. Finally, a 12 stator slot/10 rotor slot FRPM prototype is built to verify the theoretical analysis.

4 December 2017 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
SJShaofeng Jia
Shaofeng Jia
RQRonghai Qu
Ronghai Qu
WKWubin Kong
Wubin Kong
Luo ShuangshuangLuo Shuangshuang
Luo Shuangshuang
JLJian Li
Jian Li
Haiyang FangHaiyang Fang
Haiyang Fang
Stator-permanent magnet (PM) machines are gaining more research interest in recent decades. Since the permanent magnets (PMs) are moved from the rotor side to the stator side and salient rotor structure is adopted, it is claimed that the stator-permanent magnet machines exhibit several promising features, such as simple and robust rotor, being suitable for high speed operation, and good ability of heat dissipation as the main losses are located in the stator. On the other hand, to improve the shortcomings of inherent limited magnetic field adjustment ability, hybrid excitation PM machines with additional field windings are proposed. However, the complexity of the machine structure is increased inevitably. At present, it is found that both the stator PM and the stator DC current excited vernier machines operate with the flux modulation principle, and generally, the armature windings of the stator PM machines are fed with pure sinusoidal current. In this paper, a novel hybrid excitation, stator permanent magnet vernier machine (HE-VPM) is analyzed. In addition to the features of salient rotor structure, stator located PMs, and concentrated armature windings, the novelty of this machine is DC-biased sinusoidal phase current, which contains an alternating current (AC) component and a direct current (DC) component. The fundamental theories of stator PM machines fed with DC-biased current are researched, operation principle and slot/pole combination is concluded, and the optimal current configuration is studied theoretically and by finite element analysis (FEA). Finally, a prototype was designed and manufactured, the experimental tests were done to validate the proposed analysis.

15 May 2018 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
ZYZixiang Yu
Zixiang Yu
WKWubin Kong
Wubin Kong
Dong JiangDong Jiang
Dong Jiang
RQRonghai Qu
Ronghai Qu
Luo ShuangshuangLuo Shuangshuang
Luo Shuangshuang
CGChun Gan
Chun Gan
This paper proposes a novel fault-tolerant control strategy of the open winding inverter for DC-biased vernier reluctance machines (DC-biased-VRMs), aiming to maintain the output capability after the open-circuit fault occurs in the inverter switches. DC-biased-VRMs are with integrated winding current for both DC component for field excitation and AC component for torque generation. The torque generation is not associate with the current direction, making the full-bridge inverter can be divided into two groups of devices. The proposed fault-tolerant control strategy is based on the regular full-bridge inverter for each open-winding, and can control the motor in the fault tolerant mode with one group of devices. When device open circuit fault appears in the normal mode, the controller will switch to the fault tolerant mode. After a short transient period, the motor will be able to work. Moreover, in the fault tolerant mode, a PMW driving method is proposed to reduce the current ripple. The proposed method does not require any additional components, and the reliability of the drive control system is improved considerably. Experimental results verify the validity and feasibility of the proposed fault-tolerant control strategy.

26 July 2023 in IEEE Transactions on Industrial Informatics
Verified
Journal Article
Closed access
LWLijun Wang
Lijun Wang
JZJiwen Zhao
Jiwen Zhao
ZYZixiang Yu
Zixiang Yu
ZPZhenbao Pan
Zhenbao Pan
ZZZhilei Zheng
Zhilei Zheng
To improve the tracking accuracy and antidisturbance performance of permanent magnet linear synchronous motor (PMLSM), in this article, a fast recursive terminal sliding-mode control (FRTSMC) with mover velocity and disturbance observer (MVDO) is proposed. The FRTSMC is designed by a recursive structure of fast terminal sliding mode and integral sliding mode. The FRTSMC is initialized with an appropriate value to reduce the sliding-mode approach time and guarantee that the tracking error converges to zero in a finite time. To further improve the antidisturbance property and suppress the chattering phenomenon, an MVDO is integrated into the FRTSMC to simultaneously estimate the mover velocity and the lumped disturbance. Lyapunov theory is employed to analyze the closed-loop stability of the composited controller. The experimental results verify the effectiveness of the proposed method in reducing convergence error and enhancing robustness compared with the conventional fast nonsingular TSMC, adaptive recursive TSMC, and nonlinear disturbance observer based FRTSMC for PMLSM.

30 April 2018 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
ZYZixiang Yu
Zixiang Yu
WKWubin Kong
Wubin Kong
RQRonghai Qu
Ronghai Qu
Luo ShuangshuangLuo Shuangshuang
Luo Shuangshuang
SJShaofeng Jia
Shaofeng Jia
HLHongtao Li
Hongtao Li
An optimal three-dimensional current computation flux weakening control strategy for DC-Biased Vernier Reluctance Machines is proposed in this paper. Compared with permanent magnet synchronous machines (PMSMs), DC-Biased Vernier Reluctance Machines have an additional degree of freedom to regulate the rotor flux through variable DC-biased armature current. The conventional flux weakening control strategy does not utilize the adjustable DC field current, and the output ability in flux weakening region are limited. In this paper, the optimal three-dimensional current distribution is calculated at the intersection of current and voltage constraint. Meanwhile, in order to maintain the armature voltage within the voltage constraint, the inductance nonlinearity is reflected by constructing the inductance table. The algorithm provides maximum output capability and high efficiency for DC-biased-VRMs despite the changes in inductance parameters in the whole flux weakening region. Finally, the effectiveness of the proposed control strategy is validated by experimental results for a prototype machine.