1 July 2019 in Combustion and Flame
12 July 2017 in Energy & Fuels
1 February 2017 in International Journal of Hydrogen Energy
19 November 2013 in Journal of Intelligent Material Systems and Structures
Based on near-field acoustic levitation, a noncontact bearing with a spherical rotor was proposed to explore its potential application for novel supporting bearing of suspended gyro. The stator of the noncontact bearing has a hollow bowl-shaped configuration, in order to produce acoustic levitation force for a spherical object. Two orthogonal flexural standing waves were piezoelectrically generated and led to a traveling wave in the stator, and then the induced high-intensity sound in the air gap between the stator and spherical rotor could apply levitation force and even driving force for the spherical rotor. In this article, finite element model of a bowl-shaped piezoelectric stator was built, and the dynamic analysis and parametric optimization for the stator have been conducted. The prototypes were manufactured and vibration parameters of the stators were experimentally obtained. The test system for the noncontact spherical bearing was built, and its levitation and driving characteristics were measured. The spherical rotor successfully achieved levitation and noncontact rotation based on near-field acoustic levitation and the experimental results preliminarily indicate the feasibility of near-field acoustic levitation for suspended gyro.
1 November 2024 in AIAA Journal
Scale effects of flame stabilization in scramjet combustors at Mach 2.52 are investigated through experiments and numerical simulations based on two geometrically similar combustors. As the equivalence ratio increases, the combustion mode will change from Scram to Dual to Ram. However, the larger combustor has a delayed mode transition. The scale effects of flame stabilization are also reflected in the changes of heat release, precombustion shock train length, jet penetration depth, and reaction zone location. The combustion flowfields of different-scale combustors exhibit numerous differences under different combustion modes. However, after shortening the isolator of the proportionally scaled small-scale combustor, the combustion flowfield is closer to that of the large-scale combustor. Further analysis reveals the reason for the inconsistent scale effects of flame stabilization under different combustion modes. The probable reason is that the boundary layer, which does not change proportionally with the combustor scale, has different effects on the combustion under the three modes. Compared with the Scram and Ram modes, the scale effect in the Dual mode is the most significant because the strong interaction between heat release and the boundary layer amplifies the slight difference in the relative thickness of the boundary layer.