In this letter, a 20-kW-average-power Ka-band TE01 mode gyro-traveling wave tube (gyro-TWT) with a cut-off waveguide section is presented and verified by hot test experiment for the first time. To improve the average output power, the new type gyro-TWT adds a cut-off waveguide in high frequency beam-wave interaction circuits. The large signal nonlinear theory calculations and particle in cell (PIC) simulations show that the new type gyro-TWT has broadband and high-power output performances. The hot test experiment shows that the measured maximum average power is 20.3 kW at 34 GHz, corresponding to a saturated peak power of 169.2 kW, a saturated gain of 52 dB, an efficiency of ~26.9%, and 3 dB bandwidth of 3.2 GHz.
25 May 2018 in IEEE Transactions on Electron Devices
Gyrotron traveling-wave tubes (gyro-TWTs) have been proved to be an attractive power source in many applications such as high-resolution radars, high-power communication systems, and electronic warfare systems. The main output indexes such as peak and average output power, interaction efficiency, and bandwidth are important for these devices. In addition, a great deal of reliability requirements such as nonstop stable operating time, operation lifetime, and environmental adaptability should be met. In this paper, detailed developing processes of gyro-TWTs in high average power operations are presented, including theoretical analyses, multiphysics simulations of key components, fabrication, and construction of the automatic hot test platform. Finally, the measured results of a Ka-band gyro-TWT for industrial applications are presented. The amplifier exhibits an excellent performance of 100-h nonstop stable operation, a 1-dB fraction bandwidth of 8%, an efficiency of more than 20%, and a peak power and an average power of more 150 and 10 kW, respectively.
2 June 2014 in IEEE Transactions on Electron Devices
The magnetron injection gun (MIG) is an important component in a gyro-travelling wave tube. To improve the efficiency of the MIG design process, a design tool based on ANSYS Workbench combining with other commercially available software, has been developed. The design process for a Q-band triode MIG is described. A pitch factor of 1.004 and low axial velocity spread of 1.54% were achieved. The results of design tool were validated by EGUN and by numerical calculation.
26 June 2023 in IEEE Transactions on Electron Devices
The large-signal theory for curved-profile circuit and magnetic field of gyro-TWT is presented. According to it, an optimization method is proposed to achieve effective wave-particle interaction over a wide frequency band through a curved-profile circuit with cutoff sections and gyrotron solenoid magnetic field. It avoids strict limit of grazing magnetic field along the circuit position to improve the design freedom. On this basis, a Ka -band gyro-TWT operating at TE01 mode is theoretically designed and well validated by particle-in-cell (PIC) codes and hot-test experiments. The developed amplifier achieves an output power of above 134 kW range from 27.7 to 31.7 GHz, with an interaction efficiency of above 22.3% over the entire band.
12 January 2018 in IEEE Transactions on Electron Devices
In this paper, an automatic hot-test system designed in developing high average/continuous-wave power gyrotron traveling-wave tube (gyro-TWT) is presented. The system framework and each subsystem including automatic data-acquisition module, antijamming data transmission module, data storage and analysis module, automatic control and protection module, and self-developed software are given in detail. Finally, an experimental example of 100-h-nonstop unattended hot-test experiments for a Ka-band gyro-TWT is given to verify the effectiveness of the automation test system.
16 January 2019 in IEEE Transactions on Electron Devices
In this paper, techniques to improve the collector's dissipated power density threshold are discussed first. Then, theories of electron collection are presented, aiming at improving the effective electron-collecting area and collecting uniformity. Specifically, the layered electron beam collection in linear-taper collector, respectively, with constant and gradually varying magnetic field is modeled and discussed. Results indicate that a quasi-rectangular shape collection can be realized as the tangential collection dominates. Finally, the using of a compensation coil is analyzed and the corresponding collector is designed.