This paper presents a new approach for the small-signal modeling of the dc–dc LLC resonant converter aimed to supply high-power light-emitting diodes (LEDs). This small-signal modeling procedure is based on the extended describing function method, where for a reliable small-signal model of the LLC LED driver, the equivalent piece-wise linear circuit of the LED has to be considered under some conditions throughout the model development. Otherwise, the obtained model does not reflect the real dynamic behavior of the converter. Furthermore, a numerical analysis is presented showing the conditions where the proposed model better describes the real dynamic behavior of the converter in relation to the traditional approach where the LED is modeled by an equivalent resistance. From the obtained model, the feedback compensator is designed and implemented in order to track the average current reference and avoid output current ripple, consequently sidestepping output light modulation (flicker). Experimental results show the feasibility of the proposed small-signal model and the active ripple compensation through a dimmable digitally controlled LLC LED driver under closed-loop operation.
The LLC resonant converter has been widely used in switched power supply covering several kinds of applications. Although it has been the focus of numerous analysis, their general time-domain (TD) solution is not completely enclosed due to its complexity given by the multiple resonance nature and its variable structure behavior. Consequently, the LLC converter design is also impaired by the lack of an enclosed TD solution. To overcome these issues, this article systematically presents a highly accurate TD solution of the LLC converter supplying a light-emitting diode (LED) load, which is obtained from the state-space representation direct TD solution. Dissimilar to preceding analyses, all the converter states are considered and no current and voltage sinusoidal or average value approximations are taken. Finally, supported by the TD analysis, a new LLC LED driver design procedure is introduced, which is oriented by weighted-average-efficiency concept and constraints that ensure zero voltage switching, enough power gain, and practical switching frequency range over a wide operating window. Experimental results show the feasibility of the proposed design procedure as well as the accurate TD behavior prediction of the LLC converter supplying an LED load. This article is accompanied by active content that exemplifies the proposed TD solution and design procedure.