1 June 2010 in Waste Management
1 August 2010 in Geosynthetics International
Reinforcement of soils with natural and synthetic fibers is a viable technique for increasing the soil strength. The objective of this study is to reinforce sand with tire waste inclusions. In this study, two different experimental programs were performed. In the first program, sand, tire crumb and tire crumb–sand mixtures were tested in the standard direct shear test equipment to observe the optimum content for modifying the shear strength properties of the sand. In the second program, large-scale direct shear tests were performed to observe the shear strength improvement imparted by tire waste inclusions. Two different processed tire wastes were used: tire crumb (TC) and fiber-shaped tire buffings (TB). The tire buffings were divided into two parts for representing different aspect ratios (TB1 and TB2). The following factors were studied to evaluate the influence of TC, TB1 and TB2 inclusions on the shear strength: normal stress, tire waste type, aspect ratio, and tire waste content. Three factors were found to significantly affect the shear strength values: normal stress, aspect ratio, and tire waste content. Also, it is seen that increasing the aspect ratio of the fibers increases the shear strength of the mixture.
1 April 2014 in Geosynthetics International
Lightweight fill solutions have been used in many civil engineering projects throughout the world. At locations with poor soil conditions, alternative lightweight construction fill materials such as expanded polystyrene (EPS) geofoam, wood chips, and tyre wastes may be used instead of conventional fill materials. These materials are used as an additive for the soil. It is known that the type, aspect ratio and content of the admixtures have an important role in the mechanical properties of the mixtures. The main objective of this study was to assess the feasibility of the potential use of EPS beads in geotechnical applications. The effect of EPS bead gradation on the stress–strain behaviour of lightweight composite materials composed of EPS bead–sand mixtures (EPS–sand) was investigated through a series of triaxial compression tests under three different confining pressures. Three different types of spherical EPS beads with different unit weights (EPS-1, EPS-2, and EPS-3) were mixed with sand with varying EPS bead content. This study has shown that the deviatoric stress of a EPS–sand mixture is not only a function of volumetric EPS bead content but it also depends on EPS bead grain size distribution (EPS bead type). Whereas volumetric EPS bead content increases when all other variables are constant (EPS bead type in EPS–sand), the initial modulus of elasticity decreases linearly. Consequently, EPS bead inclusion did not enhance the maximum deviatoric stress of EPS–sand when compared with that of the sand-only specimen. However, bead addition provides a lightweight aspect to the mixture which can be attractive to use in many geotechnical engineering projects. EPS bead content, confining pressure and EPS bead type-dependent multiple linear regression (MLR) equations were proposed to estimate the initial undrained elastic modulus of EPS–sand to reduce the cost and time involved in conventional laboratory testing of EPS–sand mixtures. Based on the stress–strain behaviour of EPS–sand, these mixtures may be utilised in geotechnical applications as a lightweight fill material.
1 February 2013 in Geosynthetics International
When roads are constructed on weak soils, stability and settlement considerations are critical. At locations having poor subgrade support, it is recommended to use alternative methods to reinforce the soil. The use of fibre materials in geotechnical design and application is advantageous because randomly distributed fibres offer strength isotropy and improve the soil performance. This paper presents experimental results on the improvement of the California bearing ratio (CBR) performance of sand by the addition of buffing rubbers. Two different rubbers – granulated rubber and fibre shaped buffing rubber – were used. Three factors were found to significantly affect the CBR values: rubber shape, rubber content and aspect ratio. Test results revealed that changes in properties of sand caused by reinforcement were sensitive to the aspect ratio of the rubbers. Fibre inclusions with optimum aspect ratio increase the CBR of the subgrade and hence may cause a substantial decrease in design thickness of the pavement. Fibre inclusions mixed with subgrade will provide needed tensile strength under traffic loads.
1 August 2022 in Geosynthetics International
Processed waste tires can be used as additives for geotechnical applications in earthquake-prone areas. The increasing use of waste tires additives requires a better understanding of their dynamic behaviors. Processed waste tires as granular and fiber-shaped rubber particles under the same experimental conditions have not been studied before. The main purpose of this study is to carry out these experiments to determine the effects of two different processing techniques on the shear modulus and damping ratios of the mixtures. It is also the first time that the effects of fiber-shaped rubber particle inclusions are determined in detail. In addition, the results of similar tests using different processed waste tires were evaluated. The effects of the processed waste tires are given by evaluating the literature and this study together. It has been found that depending on the size, aspect ratio and content of the rubber material, the type of processing can significantly affect the dynamic properties of the mixture. The tested materials may be suitable as base isolation material. Of all the studies evaluated, the highest damping ratio was obtained with granulated rubber inclusions.
19 April 2023 in Bulletin of Earthquake Engineering