10 May 2022 in IEEE Transactions on Wireless Communications
This paper presents a new joint radar and communication technique based on the classical stepped frequency radar waveform. The randomization in the waveform, which is achieved by using permutations of the sequence of frequency tones, is utilized for data transmission. A new signaling scheme is proposed in which the mapping between incoming data and waveforms is performed based on an efficient combinatorial transform called the Lehmer code. Considering the optimum maximum likelihood detection, the union bound and the nearest neighbour approximation on the communication block error probability is derived for communication in an additive white Gaussian noise channel. The results are further extended to incorporate the Rician fading channel model, of which the Rayleigh fading channel is presented as a special case. Furthermore, an efficient communication receiver implementation is discussed based on the Hungarian algorithm which achieves optimum performance with much less operational complexity when compared to an exhaustive search. From the radar perspective, two key analytical tools, namely, the ambiguity function and the Fisher information matrix are derived. Furthermore, accurate approximations to the Cramer-Rao lower bounds on the delay and Doppler estimation errors are derived based on which the range and velocity estimation accuracy of the waveform is analysed.
10 April 2023 in IEEE Open Journal of the Communications Society
This paper focuses on the combined radar and communications problem and conducts a thorough analytical investigation on the effect of phase and frequency change on the communication and sensing functionality. First, we consider the classical stepped frequency radar waveform and modulate data using M-ary phase shift keying (MPSK). Two important analytical tools in radar waveform design, namely the ambiguity function (AF) and the Fisher information matrix (FIM) are derived, based on which, we make the important conclusion that MPSK modulation has a negligible effect on radar local accuracy. Next, we extend the analysis to incorporate frequency permutations and propose a new signalling scheme in which the mapping between incoming data and waveforms is performed based on an efficient combinatorial transform called the Lehmer code. We also provide an efficient communications receiver based on a modified Hungarian algorithm. From the communications perspective, we consider the optimal maximum likelihood (ML) detector and derive the union bound and nearest neighbour approximation on the block error probability. From the radar sensing perspective, we discuss the broader structure of the waveform based on the AF derivation and quantify the radar local accuracy based on the FIM. Extensive numerical examples are provided to illustrate the accuracy of our results.
21 July 2025 in IEEE Transactions on Wireless Communications
Motivated by the ideal peak-to-average-power ratio and radar sensing capability of traditional frequency-coded radar waveforms, this paper considers the frequency shift keying (FSK) based waveform for joint communications and radar (JCR). An analysis of the probability distributions of its ambiguity function (AF) sidelobe levels (SLs) and peak sidelobe level (PSL) is conducted to study the radar sensing capability of random FSK. Numerical results show that the independent frequency modulation introduces uncontrollable AF PSLs. In order to address this problem, the initial phases of waveform sub-pulses are designed by solving a min-max optimisation problem. Numerical results indicate that the optimisation-based phase design can effectively reduce the AF PSL to a level close to well-designed radar waveforms while having no impact on the data rate and the receiver complexity. For large numbers of waveform sub-pulses and modulation orders, the impact on the error probability is also insignificant.
5 March 2026 in IEEE Communications Standards Magazine
Integrated sensing and communications (ISAC) is considered a key enabler to support application scenarios such as the Internet-of-Things (IoT) in which both communications and sensing play significant roles. Multi-carrier waveforms, such as orthogonal frequency division multiplexing (OFDM), have been considered as good candidates for ISAC due to their high communications data rate and good time bandwidth property for sensing. Nevertheless, their high peak-to-average-power-ratio (PAPR) values lead to either performance degradation or an increase in system complexity. This can make OFDM unsuitable for IoT applications with insufficient resources in terms of power, system complexity, hardware size or cost. This article provides IoT-centric constant modulus signalling scheme designs that leverage the advantage of unit PAPR and thus are more suitable in resource-limited scenarios. More specifically, several single-carrier frequency and/ or phase signalling schemes are considered. A comprehensive discussion on their radar sensing and communications performance is conducted based on performance metrics including the radar ambiguity function, the bandwidth property, the data rate, and the communications receiver complexity. Results demonstrate that under the constraint of unit PAPR, the sensing-communications tardeoff can be achieved by selecting among the discussed signalling schemes. Recommendations for linking particular low-rate IoT scenarios with those signalling schemes are also provided based on the their performance.
28 October 2025 in IEEE Transactions on Wireless Communications
Motivated by the constant modulus property of frequency shift keying (FSK) based waveforms and the stabilisation of its radar performance with an increase in the number of subpulses, in this paper an FSK-based dynamic subpulse number joint communications and radar waveform design is proposed. From a communications point of view, the system operates based on traditional FSK modulation. From a sensing point of view, although the subpulses are continuously generated and transmitted, radar waveforms are dynamically formed by monitoring the flatness of the spectrum which in return guarantees the accuracy of the delay estimation. Other constraints on the waveform length are used to ensure satisfactory values of the root mean square time duration, ambiguity function sidelobe levels and prevent overly long waveforms. To provide an estimation of the probability of generating extremely long waveforms, the distribution of the number of subpulses is approximated using a Brownian motion process and an existing result on its one-sided exit density. Numerical examples are provided to evaluate the accuracy of the approximate distribution, as well as the ambiguity function sidelobe levels and the delay and Doppler shift estimation performance of the transmitted waveforms.
1 January 2026 in IEEE Transactions on Wireless Communications