Gesture recognition is an emerging technology of human-computer interaction. Compared to the conventional technologies such as wearable devices, cameras, radars, ultrasound-based gesture recognition has the advantages of low cost, low power consumption, and appropriates to fog or dark environment. In this study, we propose a gesture trajectory recognition device via ultrasonic signal, which is successfully applied in recognition and classification for gestures in 3D space. Firstly, the sensing hardware and software configurations for transmitting and receiving ultrasonic signal are designed, which can accurately obtain ultrasonic echo. Effects of different structures on the ultrasound scattering are explored. An adaptive filter based on wavelet packet decomposition is utilized to remove the noise in the ultrasonic echo. Secondly, the vibration principle of the ultrasonic sensor is modeled, and the rising envelope of ultrasound is fitted by the quadratic curve to accurately extract the time of flight (TOF). Then, the error analysis and compensation are performed. An active 3D positioning model is constructed and the positioning and tracking algorithm of gesture motion is theoretically established. A binomial fitting algorithm based sliding template is proposed. To process the abnormal value and locate the start position of the gesture, the data association criterion and maximum displacement threshold are introduced. Projection, dimensionality reduction, and reconstruction are performed on the trajectory. Then, the distance feature and the direction feature are extracted, and the Hidden Markov Model (HMM) is applied to realize the classification and recognition of gesture trajectory. The experiment shows that the 3D gesture recognition system based on ultrasound can recognize a total of 36 character gestures from 0-9 and A-Z, with a recognition rate of 90.53%.
In phase measuring deflectometry (PMD), the fringe pattern deformed according to slope deviation of a specular surface is digitized employing a phase-shift technique. Without height-angle ambiguity, carrier-removal process is adopted to evaluate the variation of surface slope from phase distribution when a quasi-plane is measured. However, the difficulty lies in the fact that the nonlinearity is generally contained in the carrier frequency due to the restrictions of system geometries. This paper investigates nonlinear carrier components introduced by the generalized imaging process in PMD. Furthermore, the analytical expression of carrier components in PMD is presented for the first time. The presented analytical form of carrier components can be extended to analyze and describe various effects of system parameters on carrier distortion. Assuming a pinhole perspective model, carrier phase distribution of arbitrary geometric arrangement is modeled as a function of spatial variables by exploring ray tracing method. As shown by simulation and experimental results, the carrier distortion is greatly affected by non-telecentric camera operation. Experimental results on the basis of reference subtraction technique further demonstrate that restrictions on reflection system geometry can be eliminated when the carrier phase is removed elaborately.
Contactless energy transfer (CET) is widely applied in the power transfer of rotary ultrasonic machining (RUM). However, the compensationmismatch caused by variation load leads to low transfer efficiency, poor frequency accuracy, narrow bandwidth, and vibration attenuation for RUM. To address this issue, a new parallel–series/none (PS/N) with primary compensation was proposed, which achieves the performance of lower frequency deviation, high bandwidth, and constant current gain under variation load. Based on equivalent circuit model of ultrasonic vibration tool holder (UVTH), the impedance characteristics were investigated to clarify the defects of current compensation method. Then the model of PS/N compensation was established. The numerical calculation shows that the compensation capacitance of PS/N hardly changes with the load. The impedance characteristics, frequency deviation, bandwidth, and current gain ratio were analyzed compared with series/none (S/N) under fixed compensation strategy. The experimental results are in good agreement with the calculated results. The proposed PS/N with fixed compensation can limit the frequency deviation within 1.4 Hz, increase the bandwidth of frequency chasing by 8.75 times, and control the amplitude fluctuation within 3.3% under high load. This significantly improves reliability, stability, and consistency ofmachining quality of RUM.
OS kernels enforce many security checks to validate system states. We observe that paths containing security checks are in fact very informative in inferring critical semantics in OS kernel. In particular, Such slices are valuable for detecting kernel semantic bugs because understanding semantics is typically required by the detection. However, there are few studies that address security checks, and constructing these slices is challenging due to not only a lack of clear criteria but also the large and complex OS. In this paper, combining security checks with program slicing, we first systematically study security check peer slices and propose an automatic approach to construct security check peer slices in OS kernel. Using an inter-procedural, semantic- and context-aware analysis, we can find slices sharing similar semantics in similar contexts. Based on the information offered by security check peer slices, we then introduce the Scenarios for semantic vulnerability detection by security check peer slices: missing security check and inaccurate security check. The evaluation results show that our approach can accurately constructing security check peer slices.