21 July 2022 in IEEE Journal of Emerging and Selected Topics in Power Electronics
The control performance of traditional model predictive control (MPC) usually deteriorates dramatically with the permanent magnet synchronous motor (PMSM) parameter changes in operation, leading to current harmonics and torque ripple. This paper proposes a robust model predictive current control (MPCC) method based on a nonlinear extended state observer (NESO) to resolve this problem. The NESO is used to observe the current disturbance part to avoid the influence of motor parameters on the current model. Because this method is not sensitive to changes in motor parameters, the system is robust and has a low current harmonic. Second, the ESO designed in this paper based on the nonlinear function has a lower observation error. In addition, this paper uses the fixed coefficient method to simplify the design process. A more accurate parameter design method is proposed based on the bounded analysis of observation error. At the same time, the root locus diagram proves that NESO contributes to the stability of the current loop. Finally, hardware and simulation experiments proved that the robust MPCC based on NESO has lower harmonic content and better dynamic performance.
1 January 2022 in Mechanical Systems and Signal Processing
1 July 2022 in IEEE Transactions on Industrial Electronics
Current measurement errors including offset error and scaling error can generate asymmetric phase currents and first- and second-order harmonics in motor steady-state torque/speed. In this article, a novel method using artificial error injection is proposed to calculate and compensate for the offset error and scaling error in permanent magnet synchronous motor drive. The artificial errors are injected to introduce additional equations for the calculation of current measurement errors because of the problem of rank deficiency existing in the equation about the offset/scaling error and the first/second-order harmonic magnitude. In order to guarantee the calculation accuracy of the offset error and scaling error, the cascade multiple second-order generalized integrators (cascade-multi-SOGIs) are employed to extract the magnitudes of the first- and second-order harmonics in steady-state speed error under different error injections. The method does not require the values of motor parameters, and it can be used either as part of an initial debugging or start-up program, or periodically during the regular operation of the motor. The experiments can verify its validity and practicability.
23 November 2021 in IEEE/ASME Transactions on Mechatronics
Dc-link oscillation in electromechanical equipment drive system with film capacitor is a common problem when system impedance mismatch. For this problem, an inverter voltage compensation (IVC) strategy is proposed in this article to suppresses the oscillation of dc-link voltage. This method improves the motor input impedance by designing a damping compensation link so that the input and output impedances of the system can meet the stability conditions. It injects the damping signal into the inverter reference voltage of PWM modulation, which avoids the influence of current loop bandwidth and does not directly affect the motor speed or motor current. Moreover, the compensation impedance of this method is related to the motor voltage, which can compensate system damping dynamically according to the motor operating conditions, and the effect of the compensation link on the motor dynamic performance is reduced. Furthermore, the selection of compensation coefficients in this method is more intuitive and it simplifies the system design. Finally, experimental results demonstrate the effectiveness of the proposed method after building an experimental platform.
24 May 2022 in IEEE Transactions on Vehicular Technology
Swift decision-making based on visual environment perception is crucial for autonomous control of visual underwater vehicles (VUVs) during underwater missions. However, learning perception and decision models individually might result in weak robustness of overall control system as the mismatched state extraction and control decision making are asynchronous. As a remedy, we will introduce in this paper an end-to-end monocular autonomous reinforcement control (MARC) framework for autonomous control of VUVs, which is performed in two cascaded procedures, i.e., 1) perception, where a geometric network (GeoNet) is designed based on a convolutional encoder-decoder network to generate depth maps from input environmental videos; 2) decision, where with depth maps as input, a reinforcement control network (CtrlNet) integrates a convolutional neural network into a deep deterministic policy gradient network and outputs action decisions, which are refined by reinforcement learning algorithm for obstacle-avoiding based autonomous control. Numerical and experimental results demonstrate that the proposed MARC exhibits high-quality depth prediction and is capable of conducting obstacle-avoiding navigation and autonomous control of VUVs with high accuracy and strong robustness.
22 March 2024 in IEEE Transactions on Power Electronics
The finite control set model predictive current control involves addressing challenges related to greater cost function values and inaccurate current prediction models, which can adversely impact the steady-state performance in permanent magnet synchronous motor (PMSM). A robust amplitude control set model predictive current control method (RACSMPCC) is proposed in this study, aiming to enhance prediction accuracy and control precision. This method introduces a rotation coordinate system amplitude control set to reduce the cost function value and improve current control precision. Then, a nonlinear extended state observer (NESO) is employed to observe and compensate for comprehensive disturbances in the current prediction equation, thereby improving the accuracy of the current prediction. Simultaneously, a parameter configuration method in the complex frequency domain is proposed for NESO, and its influence on the disturbance rejection performance of the system is analyzed. Hardware experiments on a PMSM are conducted to validate the effectiveness of RACSMPCC in reducing cost function and improving current control accuracy.