The processes of iron oxides’ reduction have a complex physicochemical mechanism, with the participation of solid, liquid, and gaseous substances. The article discusses the existing models for the reduction of iron oxides and provides data on the thermodynamic possibility of carrying out the reactions of their reduction through the solid and gas phases. Experimental data on the reduction of iron from industrial scale, obtained by the DSC (differential scanning calorimetry) method, show the kinetic dependence of the rate and completeness of recovery on external factors: pressing pressure during sample preparation and the reagents’ composition. The pressing pressure, under conditions of iron ions’ solid-phase diffusion, has the significant effect by increasing the reagents’ contact area. Under conditions of iron ions’ comprehensive diffusion, the pressing pressure does not affect the reduction processes rate. The introduction of 10 mass.% flux into the raw mixture composition leads to a partially liquid-phase diffusion of iron ions and weakens the effect of the pressing pressure in this process. An ion diffusion-catalytic mechanism is proposed to describe the observed effects during the reduction of iron oxide of technogenic origin.
The literature on the foaming of electrofurnace slag is reviewed. On that basis, recommendations for improvement in slag foaming are formulated. Inconsistencies in the published data are noted, and some principles are elaborated. It is evident that two key factors have been ignored in the existing research: the temperature of the slag; and its content of small gas bubbles.
Methods are proposed for ongoing monitoring of the slag oxidation and the depth of the electrical arcs in slag at the converter shop of OAO EVRAZ NTMK. Such monitoring is expected to increase the rate of metal heating, reduce the ferroalloy and power consumption, and increase the lining life in casting ladles.