13 May 2021 in Discover Nano
Herein, we demonstrate the fabrication of highly capacitive activated carbon (AC) using a bio-waste Kusha grass (Desmostachya bipinnata), by employing a chemical process followed by activation through KOH. The as-synthesized few-layered activated carbon has been confirmed through X-ray powder diffraction, transmission electron microscopy, and Raman spectroscopy techniques. The chemical environment of the as-prepared sample has been accessed through FTIR and UV–visible spectroscopy. The surface area and porosity of the as-synthesized material have been accessed through the Brunauer–Emmett–Teller method. All the electrochemical measurements have been performed through cyclic voltammetry and galvanometric charging/discharging (GCD) method, but primarily, we focus on GCD due to the accuracy of the technique. Moreover, the as-synthesized AC material shows a maximum specific capacitance as 218 F g−1 in the potential window ranging from − 0.35 to + 0.45 V. Also, the AC exhibits an excellent energy density of ~ 19.3 Wh kg−1 and power density of ~ 277.92 W kg−1, respectively, in the same operating potential window. It has also shown very good capacitance retention capability even after 5000th cycles. The fabricated supercapacitor shows a good energy density and power density, respectively, and good retention in capacitance at remarkably higher charging/discharging rates with excellent cycling stability. Henceforth, bio-waste Kusha grass-derived activated carbon (DP-AC) shows good promise and can be applied in supercapacitor applications due to its outstanding electrochemical properties. Herein, we envision that our results illustrate a simple and innovative approach to synthesize a bio-waste Kusha grass-derived activated carbon (DP-AC) as an emerging supercapacitor electrode material and widen its practical application in electrochemical energy storage fields.
1 March 2019 in Journal of the Taiwan Institute of Chemical Engineers
1 December 2019 in Materials Today Chemistry
Hydrogen is considered as an ideal and sustainable energy carrier because of its high energy density and carbon-free combustion. Electrochemical water splitting is the only solution for uninterrupted, scalable, and sustainable production of hydrogen without carbon emission. However, a large-scale hydrogen production through electrochemical water splitting depends on the availability of earth-abundant electrocatalysts and a suitable electrolyte medium. In this article, we demonstrate that hydrogen evolution reaction (HER) performance of electrocatalytic materials can be controlled by their surface functionalization and selection of a suitable electrolyte solution. Here, we report syntheses of few-layered MoS2 nanosheets, NiO nanoparticles (NPs), and multiwalled carbon nanotubes (MWCNTs) using scalable production methods from earth-abundant materials. Magnetic measurements of as-produced electrocatalyst materials demonstrate that MoS2 nanoflakes are diamagnetic, whereas surface-functionalized MoS2 and its composite with carbon nanotubes have strong ferromagnetism. The HER performance of the few-layered pristine MoS2 nanoflakes, MoS2/NiO NPs, and MoS2/NiO NPs/MWCNT nanocomposite electrocatalysts are studied in acidic and alkaline media. For bare MoS2, the values of overpotential (η10) in alkaline and acidic media are 0.45 and 0.54 V, respectively. Similarly, the values of current density at 0.5 V overpotential are 27 and 6.2 mA/cm2 in alkaline and acidic media, respectively. The surface functionalization acts adversely in the both alkaline and acidic media. MoS2 nanosheets functionalized with NiO NPs also demonstrated excellent performance for oxygen evolution reaction with anodic current of ~60 mA/cm2 and Tafel slope of 78 mVdec−1 in alkaline medium.
31 August 2020 in Frontiers in Physics
The increasing plead for the realization of ultra-fast, miniaturized, compact, and ultra-low power consumption in electronic as well as spintronic devices has propelled the quest for novel multiferroic materials that efficiently enable voltage control of magnetism. The present work reports the phase stability, magnetic and dielectric responses of polycrystalline Bi1−xLaxFe1−yNiyO3 (0 ≤ x ≥ 0.2 and 0 ≤ y ≥ 0.2) multiferroic ceramics synthesized through a simplistic sol–gel approach. The maneuver substitutions of La at A− site of BiFeO3 multiferroic eliminate the secondary phases formed owing to impurities. Rietveld refined XRD analysis reveals the structural transformation of the orthorhombic (Pbnm) phase as La substitution increases. However, an additional lattice distortion is induced as a result of the substitutions of Ni atoms at B− site. A substantial enhancement in magnetic and dielectric responses has been found in the co-doped (Ni and La) sample at both A and B− sites as a result of the size confinement of nano-crystallites, the exchange interaction between Fe3+ and Ni2+ ions, and corresponding variation in Fe–O–Fe bond angles. The dielectric constant has increased substantially in the low-frequency region with simultaneous substitutions of La and Ni at the sites of Bi and Fe, respectively. A careful observation of temperature-dependent magnetization curves (FC and ZFC) indicates a spin glass response with entangled ferromagnetic components. The experimental findings infer that the co-substitutions of La and Ni at their respective sites in Bi1−xLaxFe1−yNiyO3 (0 ≤ x ≥ 0.2 and 0 ≤ y ≥ 0.2) may significantly improve the ferromagnetic and dielectric responses of the studied nanoceramics.
29 January 2024 in Journal of Materials Science: Materials in Electronics
27 February 2018 in Applied Nanoscience