27 November 2017 in Optics Express
Determining the complete optical behavior of anisotropic samples using ptychography is always a difficult problem. We propose a novel birefringence measurement method based on mixed-state ptychography that can simultaneously obtain the azimuth angle and retardation of anisotropic samples in a single scan. By using a reference system transformation, the two mutually orthogonal object states are unambiguously retrieved, and their errors are greatly reduced. The normalized root mean square errors of the obtained azimuth angle and retardation are 0.0011 and 0.0041, respectively. This method offers more rapid data acquisition; compared to interferometric based methods, it has the advantages of unlimited field of view and a simpler, more stable setup. Further, it opens a new possibility for investigating anisotropic samples by means of mixed-state ptychography.
17 August 2022 in Applied Optics
The clamping stress of large-aperture optical elements has a significant influence on the optical quality of the system. In this study, a comprehensive measurement system combined with ptychographical iterative engine (PIE) wavefront sensors and polarization components is developed to determine the stress distribution of the optical elements and its effect on the transmitted and reflected wavefronts. This system avoids the use of multiple measuring instruments and has low cost and strong anti-interference ability. The experimental results demonstrate that the stress distributions measured at different resolutions are consistent with the finite element analysis, and the wavefront measurement accuracy is . This test configuration is very flexible and provides a useful means for online installation and quality control of large-aperture optical systems.
2 January 2019 in Applied Optics
In a high power laser system, the wavefront quality of large optical components in the mid spatial frequency band plays a critical role in system performance and safe operation. A simple and efficient method based on ptychography is used to measure mid-frequency wavefront error, which has the advantages of simple structure, strong anti-interference ability, flexible frequency-range selection, and low cost. It has excellent frequency response in the entire mid-frequency region. The transfer function is demonstrated to be greater than 0.7 at 1/2 Nyquist frequencies () for 60 mm field-of-view experimentally. The method has been successfully applied to the wedged focused lens (WFL) to achieve high-fidelity measurement. Without any auxiliary lens, the power spectrum of the WFL at the frequency of interest is obtained through large-aperture measurement. This technique is especially suitable for optical components difficult to be measured using interferometers and opens up a new perspective for measuring mid-frequency wavefronts.