6 March 2018 in Journal of Analytical Atomic Spectrometry
The mechanical properties of steel with different aging degree microstructure was estimated by combining LIBS and chemometrics (CCA and SVR).
12 April 2020 in Analytical Chemistry
23 January 2019 in Journal of Analytical Atomic Spectrometry
The aim of this study was to analyze the carbon contents in coal samples by laser-induced breakdown spectroscopy (LIBS). The 266 nm laser radiation was utilized for laser ablation and plasma generation under atmospheric conditions. The correlated carbon atomic and molecular emission lines were determined for the variables of the multiple linear regression (MLR) model. Then, the plasma temperatures of different coal samples were compared to characterize the necessity of residue correction from the MLR model. Finally, the partial least squares regression (PLSR) and support vector regression (SVR) were proposed to correct the residue errors of the MLR model. R2, RMSECV, and RMSEP for the MLR model were 0.86%, 3.20%, and 3.41%, whereas these values for the MLR model coupled with the PLSR correction model were 0.99%, 0.13%, and 2.46%, respectively; moreover, these values for the MLR model coupled with the SVR correction model were 0.99%, 0.00039%, and 1.43%. The results showed that the combination of carbon atomic and molecular emissions with both PLSR and SVR correction could improve the measurement accuracy, and the SVR correction helped in achieving better measurement accuracy.
7 March 2020 in Journal of Analytical Atomic Spectrometry
It is of great significance to realize the rapid or online analysis of coal properties for optimization of combustion in thermal power plants. In this work, a set of calibration schemes based on laser induced breakdown spectroscopy (LIBS) was determined to improve the measurements in quantitative analysis of coal properties, including proximate analysis (calorific value, ash, volatile content) and ultimate analysis (carbon and hydrogen). Firstly, different normalization methods (channel normalization and normalization over the whole spectral area) combined with two regression algorithms (partial least squares regression [PLSR] and support vector regression [SVR]) were compared to make an initial selection of the appropriate calibration method for each indicator. Then, the influence of de-noising by wavelet threshold de-noising (WTD) on quantitative analysis was further studied, whereby the final analysis schemes for each indicator were determined. The results showed that WTD coupled SVR can make a good estimate of calorific value and ash: the root mean square errors of prediction (RMSEP) were 0.80 MJ kg−1 and 0.60%. Coupling of WTD and PLSR performed best for the measurement of volatile content, and the RMSEP was 0.76%. For the quantitative analysis of carbon and hydrogen, normalization over the whole spectral area combined with SVR can get better measurement results, and the RMSEP of the measurements were 1.08% and 0.21%, respectively. The corresponding average standard deviations (RSD) for calorific value, ash, volatile content, carbon and hydrogen of the validation sets were 0.26 MJ kg−1, 0.57%, 0.79%, 0.47% and 0.08%, respectively. The results demonstrated that the selection of appropriate spectral pre-processing coupled with calibration strategies for each indicator can effectively improve the accuracy and precision of measurements of coal properties.
30 July 2019 in Analytical Methods
The real-time quantitative analysis of the calorific value of pulverized coal particle flow is important for the efficient and clean combustion of coal. Herein, a piezoelectric vibratory feeder produced a continuous flow of pulverized coal particles, which were detected by laser-induced breakdown spectroscopy (LIBS), and the corresponding spectral information was obtained. The obtained data matrices, after removing abnormal data, were subjected to normalization in a row-wise manner to improve the signal repeatability. Then, the second convolution derivative was conducted on the LIBS spectra to correct the spectral interference. To acquire appropriate number and type of variables for the PLS quantitative model, the variable selection methods of genetic algorithm (GA) and synergy interval partial least squares (siPLS) in the quantitative model were analyzed and compared. The results showed that spectral correction could be used to improve the predictive precision and accuracy of the quantitative model based on the full spectrum. The predictive accuracy of the model with variables selected by siPLS was further improved. The minimum average relative error (RE) of the predictive values for the validation samples was 1.53%, and the average error of the proposed model for the calorific value quantitative analysis was 0.22 MJ kg−1. The measurement indicated that LIBS could realize an accurate and precise real-time quantitative analysis of the pulverized coal particle flow.
5 April 2019 in The Analyst
Laser-induced breakdown spectroscopy is applied to evaluate the running state of steel by the hybrid model combining wavelet transform and recursive feature elimination.