Bioethanol production from renewable biomass sources has garnered significant interest due to its potential as a sustainable alternative to fossil fuels. In this study, we investigated the optimization of bioethanol production from molasses, a by-product of the sugar production process using Saccharomyces cerevisiae through Response Surface Methodology (RSM). Initially, the fermentation process was optimized using RSM, considering four independent variables: substrate concentration, pH, temperature, and fermentation time. Subsequently, the effects of these variables on bioethanol yield were evaluated, and a quadratic model was developed to predict the optimum conditions. Analysis of variance (ANOVA) indicated a high coefficient of determination (R2) for the model, suggesting its adequacy for prediction. The optimized conditions for bioethanol production were determined as follows: substrate concentration of 200 g L−1, pH of 5.0, temperature of 30 °C and fermentation time of 72 h. Under these conditions, the predicted bioethanol yield was 84%. Overall, this study demonstrates the successful application of RSM for optimizing bioethanol production from molasses using S. cerevisiae, highlighting its potential as a promising feedstock for biofuel production.
PSS stands out as a leading commercial conducting polymer due to its excellent water dispersibility, controllable miscibility, adjustable conductivity, and ability to form films through various techniques. This study investigates the electrochemical and electrochromic performance of electrodes prepared by depositing PEDOT:PSS onto ITO surfaces by using two distinct methods: conventional spray coating and electrospray deposition. Detailed characterization of the prepared electrodes was performed by using atomic force microscopy, scanning electron microscopy, Fourier-transform infrared, and Raman spectroscopy techniques. Our findings reveal that electrodes fabricated via electrospray deposition (PEDOT:PSS/ITO electrode_2) significantly outperform those made by spray coating (PEDOT:PSS/ITO electrode_1). Specifically, electrode_2 exhibits a capacitance of 1678.60 μF cm-2, compared to 826.14 μF cm-2 for electrode_1, at a current density of 10 μA cm-2. PSS electrodes exhibit areal energy densities of 0.41 and 0.84 mW h cm-2, along with power densities of 4.96 and 4.97 μW cm-2, respectively. Moreover, electrode_2 demonstrates a high coloration efficiency of 84.32 cm2 C-1 and fast response times of 1.36 s for coloration and 0.98 s for bleaching. This study highlights the advantages of electrospray deposition over traditional methods, showcasing the potential of electrospray-prepared PEDOT:PSS electrodes for use in multifunctional energy storage devices.