12 February 2010 in Journal of Materials Chemistry
Single-walled carbon nanotubes (SWCNTs) have been used as fillers to produce electrically conductive composite papers. While conductive composite papers have been made using other fillers, they either suffer from instability or low conductivity. Using simple papermaking techniques, we have made SWCNT–cellulose composite paper which possesses a conductivity of 3 × 10−2 S cm−1 and is comparable to or exceeds other reports of carbon nanotube–cellulose papers made by layer-by-layer assembly. These composite papers are multifunctional, having both improved electrical conductivity and enhanced flame retardant properties over the control paper.
12 October 2007 in Chemical Communications
We report a rapid and efficient procedure to functionalize SWNT where free radicals generated at room temperature by a redox reaction between reduced SWNT and diacyl peroxide derivatives were covalently attached to the SWNT wall.
9 April 2020 in Chemistry of Materials
4 November 2014 in RSC Advances
Single-walled carbon nanotubes (SWCNTs) covalently modified with OH functional groups were assembled into buckypapers through solvent dispersion and vacuum filtration. These SWCNT-OH buckypaper sheets were subsequently crosslinked by wetting with bifunctional linkers followed by hot compression causing reaction between the functional groups of the reagent and OH functional groups on the side-walls of SWCNTs to create three-dimensional (3D) covalently cross-linked buckypapers. Cross-linking also was performed using SWCNTs encapsulated with a functionalized polymer wrapping in a core–shell structure, where OH or/and NH2 groups are available on the surface of the polymeric shell for reaction. The 3D cross-linked SWCNT buckypapers retain the porous character typical of buckypaper, and were characterized for their tensile properties and thermal and electrical conductivities. Several cross-linking approaches dramatically improved the mechanical properties. The strongest and stiffest papers (32 MPa, E = 3.1 GPa), which approach 10× stronger and stiffer than the pristine non-crosslinked buckypaper, were obtained at the expense of a loss of electrical conductivity. In other cases, such as cross-linking using a high-performance epoxy resin monomer, improvements in strength and stiffness of ∼5× were obtained while retaining electrical and thermal conductivity. Therefore, the optimal cross-linking approach would be determined by the desired, multifunctional properties. Additionally, the approach can be used in the preparation buckypaper composites and it is demonstrated that cross-linking using a multifunctional epoxy resin prior to impregnation with the same epoxy resin results in substantially better mechanical properties in comparison to just epoxy-impregnation of pristine buckypaper.
30 April 2015 in RSC Advances
The fabrication of BNNT–polymer nanocomposites, including BNNT–epoxy and BNNT–polyurethane has been demonstrated for the first time from free-standing BNNT buckypapers.
10 March 2016 in Physica Status Solidi (a)