This study aims to optimize strong acid hydrolysis-based production of cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs) from pre-extracted and fully bleached kraft pulp of loblolly pinewood, the most abundant and commercially significant softwood species in southeastern United States. The effect of four parameters, including acid concentration, temperature, duration and pulp particle size, on the yield and properties of CNCs was investigated using the central composite design (CCD) of response surface methodology (RSM) for process optimization. While CNC yield was significantly affected by acid concentration and hydrolysis temperature and was adequately explained by an empirical model, none of the characteristic properties of CNCs, including crystallinity index, surface charge and particle size, displayed any strong correlation to the process parameters within the experimental ranges tested. At different hydrolysis severities, we not only analyzed the waste streams to determine the extent of holocellulose degradation, but also evaluated the properties of leftover partially hydrolyzed pulp, called cellulosic solid residues (CSR), to gauge its potential for CNF production via mechanical fibrillation. Conditions that maximized CNC yields (60% w/w) were 60% acid concentration, 58 °C, 60 min and 40 mesh particle size. Twenty percent (w/w) of the pulp was degraded under these conditions. On the other hand, conditions that maximized CSR yields (60% w/w) were 54% acid, 45 °C, 90 min and 20 mesh particle size, which also produced 15% CNCs, caused minimal pulp degradation (< 5%) and imparted sufficient surface charge such that CSR was easily microfluidized into CNFs. Therefore, the strong acid hydrolysis process could be tuned to maximize the production of cellulose nanocrystals and nanofibers and obtain two products with different properties and applications through the process optimization.
1 February 2006 in The Journal of Clinical Pharmacology
Herbal medicine is used worldwide either as a sole treatment method or as part of a comprehensive treatment plan alongside orthodox methods of diagnosis and treatment. A survey reported that, in the USA, nearly one-sixth of women took at least one herbal product in 2000. Despite their widespread use, numerous reports show that the herbal products available to consumers are of variable quality. This disparity in quality of herbal preparations can be attributed to the fact that their production is complicated. To produce high-quality herbal products, attention must be paid to, among others, phytochemical variations due to plant breed, organ specificity, stages of growth, cultivation parameters, contamination by microbial and chemical agents, substitution, adulteration with synthetic drugs, heavy metal contamination, storage and extraction. This review focuses on organ specificity, seasonal variations, the effect of drying and storage, and the extraction of phytochemical constituents. Special emphasis is placed on the four most frequently used herbal products in the USA: echinacea, Ginkgo biloba, ginseng and St John's Wort.