22 June 2017 in IEEE Transactions on Power Systems
In this study, a linearized and convergence-guaranteed optimal power flow (OPF) model with reactive power (Q ) and voltage magnitude (v) is proposed. Based on a linearized network model, a fully linearly-constrained OPF model is formulated with constraints on Q and v and limits on the apparent branch flow. Compared with the commonly used DC OPF method, the proposed method narrows the deviation from the AC OPF solution without requiring any additional information of the power grid. The locational marginal price (LMP) of the proposed method is closer to the AC OPF solution than the DC OPF method. The marginal price of the reactive power (Q-LMP) is provided, which offers the opportunity to price the reactive power. Case studies on several IEEE and Polish benchmark systems show that the proposed OPF method substantially enhances the performance of the prevalent DC OPF method. In addition, it is shown that if the accuracy of the linearized network model needs to be further improved, such as that during the iterative quasi-optimization process that reconstitutes the AC feasibility, a solution that is notably close to the optimum of the AC OPF model can be obtained by taking only one more iteration.
25 September 2019 in IEEE Systems Journal
It is of growing concern to ensure the resilience in electricity infrastructure systems to extreme weather events with the help of appropriate hardening measures and new operational procedures. An effective mitigation strategy requires a quantitative metric for resilience that can not only model the impacts of the unseen catastrophic events for complex electric power distribution networks, but also evaluate the potential improvements offered by different planning measures. In this article, we propose probabilistic metrics to quantify the operational resilience of the electric power distribution systems to high-impact low-probability (HILP) events. Specifically, we define two risk-based measures: value-at-risk ( $VaR_\alpha$ ) and conditional value-at-risk ( $CVaR_\alpha$ ) that measure resilience as the maximum loss of energy and conditional expectation of a loss of energy, respectively, for the events beyond a prespecified risk threshold, $\alpha$ . Next, we present a simulation-based framework to evaluate the proposed resilience metrics for different weather scenarios with the help of modified IEEE 37-bus and IEEE 123-bus system. The simulation approach is also extended to evaluate the impacts of different planning measures on the proposed resilience metrics.
30 June 2017 in IEEE Transactions on Power Systems
With the increasing applications of VSC-HVDC technologies in power grids, the importance of incorporating DC grids and converter stations into the optimal power flow (OPF) problem is increasing. The modeling of a converter station involves highly nonlinear operational constraints and integer variables representing the tap settings of LTC transformers. In this paper, an efficient OPF algorithm for hybrid AC-DC grids with discrete control devices is presented. A successive linear approximation method for the power flow equations in both AC and DC grids is introduced. The operational constraints of the converter station are thoroughly investigated. The proposed linearization of the power flow equations facilitates the convexity of the VSC modeling. A fictitious branch is added to the AC grid to handle the highly nonlinear converter losses. The discrete nature of the LTC transformer in the converter station is accurately modeled. An iterative solving algorithm is proposed for the OPF model. The strict satisfaction of the power flow equations is enabled through the application of an AC feasibility recovery process based on the power flow calculation in hybrid AC-DC grids. Case studies demonstrate that the proposed algorithm outperforms several selected commercial solvers.
15 March 2019 in IEEE Transactions on Power Delivery
Substation asset health has always been one of the utmost concern for utilities. The substation secondary assets such as Current Transformers (CTs), Potential Transformers (PTs) and Coupling Capacitor Voltage Transformers (CCVTs) play vital roles for system situational awareness and grid operations. This paper proposes a novel on-line Substation Instrument Transformer Health Monitoring System (SITHMS) which merely uses time-synchronized and high-resolution Phasor Measurement Unit (PMU) data. The SITHMS can provide early warning and alert utility personnel to diagnose the equipment malfunction and take proactive actions for asset management to prevent equipment failure. The core component of the SITHMS is a modelbased Three-Phase Substation-level Linear State Estimator ( $3\Phi$ -SLSE), which features a built-in Largest Normalized Residual (LNR) module that can detect anomalies in PMU data by using substation model and configuration, so as to probe if there is malfunction or potential failure of these secondary equipment. In addition, we present the system's implementation architecture and testing environment setup. Case studies with the PSCAD simulated data and field PMU data from actual substations at American Electric Power (AEP) demonstrate the effectiveness of the proposed system.
8 January 2018 in IEEE Transactions on Smart Grid
The continuing rollout of phasor measurement units (PMUs) enables wide area monitoring and control (WAMS/WACS), but the difficulty of sharing data in a secure, scalable, cost-effective, low-latency manner limits exploitation of this new capability by bulk electric power grid operators. GridCloud is an open-source platform for real time data acquisition and sharing across the jurisdictions that control a bulk interconnected grid. It leverages commercial cloud tools to reduce costs, employing cryptographic methods to protect sensitive data, and software-mediated redundancy to overcome failures. The system has been tested by ISO New England and the results reported here demonstrate a level of responsiveness, availability and security easily adequate for regional WAMS/WACS, with the capacity for nation-wide scalability in the future.
7 January 2022 in IEEE Access
With the rapidly increasing deployment of distributed energy resources (DERs), electric power systems across the world are moving towards more distributed designs and operations. While not every distributed device will be part of a microgrid, microgrids do offer solutions for scalability and interoperability, and for coordination with centralized utility control systems. The challenge is that the microgrids will be heterogenous with respect to ownership, operational objectives, resource mix, and control systems. Due to these variations within the population of microgrids, there will be significant challenges with coordinating their operations to achieve global objectives using existing centralized controls and optimizations. This paper presents a framework for the coordination of heterogeneous groups of microgrids using consensus algorithms. The framework enables the active engagement of utility and non-utility microgrids using a distributed architecture to support end-use loads during the loss of the bulk power system. Results from laboratory testing and preliminary implementations, as well as details of an ongoing operational deployment at the Electric Power Board of Chattanooga are presented in this paper.