3 October 2016 in Journal of Applied Physics
Elastic/acoustic metamaterials made from locally resonant arrays can exhibit bandgaps at wavelengths much longer than the lattice size for various applications spanning from low-frequency vibration/sound attenuation to wave guiding and filtering in mechanical and electromechanical devices. For an effective use of such locally resonant metamaterial concepts in finite structures, it is required to bridge the gap between the lattice dispersion characteristics and modal behavior of the host structure with its resonators. To this end, we develop a novel argument for bandgap formation in finite-length elastic metamaterial beams, relying on the modal analysis and the assumption of infinitely many resonators. We show that the dual problem to wave propagation through an infinite periodic beam is the modal analysis of a finite beam with an infinite number of resonators. A simple formula that depends only on the resonator natural frequency and total mass ratio is derived for placing the bandgap in a desired frequency range, yielding an analytical insight and a rule of thumb for design purposes. A method for understanding the importance of a resonator location and mass is discussed in the context of a Riemann sum approximation of an integral, and a method for determining the optimal number of resonators for a given set of boundary conditions and target frequency is introduced. The simulations of the theoretical framework are validated by experiments for bending vibrations of a locally resonant cantilever beam.
6 August 2018 in IEEE/ASME Transactions on Mechatronics
We present an electromechanical modeling framework and a detailed numerical investigation for the design and analysis of piezoelectric metamaterial beams whose unit cells with segmented electrode pairs are shunted to synthetic impedance circuits. This framework aims to extend the well-studied locally resonant piezoelectric metamaterials and resulting finite metastructures with specified boundary conditions to novel concepts beyond bandgaps associated with simple inductive shunts. Overcoming the bandgap limitations of the locally resonant design requires more advanced considerations in the electrical domain. To this end, we bridge piezoelectric metamaterials and synthetic impedance shunts, and present a general design and analysis framework along with numerical case studies. A general procedure is implemented based on the root locus method for choosing the shunt circuit impedance, with an emphasis on vibration attenuation and practical design considerations. Case studies are presented for systems with locally resonant bandgaps with or without negative capacitance, as well as systems with multiple distinct bandgaps, and the necessary shunt admittance is derived for each case. Simulations are performed for a typical finite meta material beam with synthetic impedance shunts, accounting for the finite sampling rate and circuit dynamics. Time-domain simulations using these synthetic impedance circuits are compared to the ideal frequency-domain results with very good agreement.
5 June 2020 in Physical Review Applied
We introduce and experimentally demonstrate a class of fully programmable digitally controlled metamaterials. An elastic waveguide is connected to synthetic impedance circuits as active elements to enable simultaneous control over the center frequency, attenuation, and bandwidth of resonant band gaps. The experimental results demonstrate digital tuning over a wide frequency range that spans several modes of the waveguide. This platform opens avenues to achieving precise control over effective metamaterial properties and their possible space-time modulation, paving the way for digitally controlled programmable wave devices.
22 February 2022 in Physical Review Applied
We numerically and experimentally investigate spatially programmable rainbow trapping and band-gap enhancement using a graded piezoelectric metamaterial beam with unit cells shunted to synthetic impedance circuits. The local inductive shunt resonant frequency of each unit cell is different and follows a predefined spatial variation along the beam length. We explore the effect of various grading profiles on the spatial wave trapping and on the attenuation bandwidth. Experiments are performed on a clamped-clamped metamaterial beam with piezoelectric elements shunted to synthetic impedance circuits with gradually varying inductance. Numerical simulations and experimental results reveal that, over a frequency band containing all resonant frequencies of unit cells, propagating elastic waves can be trapped uniformly or nonuniformly along the beam, and that the spatial trapping pattern follows the respective target frequency grading profile. Additionally, substantial band-gap enhancement is observed (as high as increase) as compared with the identical resonators counterpart. Overall, the results show the versatility of this class of graded piezoelectric metamaterials and support the design of such programmable piezoelectric metastructures.
6 July 2020 in Physical Review B
Recent research has shown that a proper spatiotemporal modulation of material properties (i.e., mass density or stiffness) can break reciprocity for elastic waves; however, such concepts are challenging to implement experimentally in mechanical waveguides. Piezoelectric metamaterials offer the possibility of parameter modification via electrical circuitry, constituting a convenient platform for spatiotemporal modulation. We introduce a fully coupled electromechanical framework and circuit strategies to enable nonreciprocal piezoelectric metamaterials using various schemes that include capacitive and inductive shunts as well as smooth modulation and nonsmooth switching. The high-fidelity framework presented herein does not rely on the assumption of simplified effective material property representation, and can be used to explore and predict the complete dynamics of the modulated system, accounting for full-system stability, circuit limitations, and more complex modulation schemes. A set of results is presented based on nonreciprocal configurations that illustrate potential implementation schemes, and demonstrate the versatility of piezoelectric materials for the design of truly integrated acoustic/elastic wave devices featuring nonreciprocal transmission.
10 August 2018 in Journal of Applied Physics
Locally resonant metamaterials leveraging shape memory alloy (SMA) springs are explored in this work in an effort to develop adaptive metamaterial configurations that can exhibit tunable bandgap properties as well as enhanced damping capabilities. An analytical model for a locally resonant metamaterial beam in transverse vibrations is combined with an SMA model for the resonator springs to investigate and leverage the potential of temperature-induced phase transformations and stress-induced hysteretic behavior of the springs. Two case studies are presented for this new class of smart metamaterials and the resulting finite metastructures. In one case, SMA resonators operate in the linear elastic regime, first at low temperature (martensitic behavior) and then at high temperature (austenitic behavior), demonstrating how the bandgap can be tuned to a different frequency range by altering the SMA elastic modulus with temperature. In the second case, the SMA springs are kept at high temperature at all times to operate in the nonlinear regime, so that the hysteresis associated with the SMA pseudoelastic effect is manifested, yielding additional dissipation over a range of frequencies, especially for the modes right outside the bandgap.