Woodpeckers have flexible and extendable tongues that they use to reach their prey through tiny openings in trees and insect burrows. This unique capability of their tongue represents a promising design for a tool for picking up and handling objects in unstructured environments. Although continuum robots can produce dexterous movements because of their few shape constraints, the lack of structural stiffness has restricted their deployment in real-world environments. Inspired by the characteristics of woodpeckers, we designed a robot manipulator that can substantially extend its length and bend its shape in 2D space. This behavior is enabled by a backbone consisting of a chain of rigid joints and two flexible rack gears. The joints increase the payload by structurally supporting the robot. The proposed structure is 4.7 times stronger in vertical bending and 6.2 times stronger in torsion than without rigid links. Feeding the rack gears at the same and different speeds allows the robot to elongate and bend, respectively. We developed a geometric model based on a constant curvature model for motion planning. Experiments show that the robot can follow an arbitrary trajectory at an arbitrary tip angle. Lastly, we showcase various demonstrations, including deployment and storage for the backbone, follow-the-leader (FTL) motion, and whole-arm grasping in the horizontal plane.
9 November 2023 in IEEE Robotics and Automation Letters
Continuum robot arms that can access confined spaces are useful in many applications, such as invasive surgery, search and rescue, and inspection. However, their reach is often limited because their extension mechanism relies on elastic deformation or folding structures. To address this challenge, we propose a continuum robot with a novel extension mechanism inspired by the impressive ability of woodpeckers to extend and bend their long tongues to catch insects in tree holes. The proposed mechanism can change the effective length of the robot from almost zero to any length by moving the robot's body back and forth. Our prototype robot demonstrated a maximum extension of 450 mm and a minimum bending radius of 125 mm. In addition, we developed a Gaussian process regression model to predict an external force applied to the robot's tip using inertial measurement units. This enabled us to determine the magnitude and direction of the force with an error rate of 4.8 percent and 11.1 percent, even when the robot's length was varied between the training and test data. The unrestricted extension capability of the proposed approach has the potential to increase the application prospects of continuum robots.
To prevent accidents occurring in daily life, such as the collision between objects in the environment and our body, the perception-assist technique, which can automatically change a dangerous motion to a safe motion, has been considerably studied. In addition, it has recently been found by the authors that a human’s motion is different from his/her intended motion if vibration stimulation is presented on an antagonist muscle. In this study, a method to change human motion in a controlled manner using vibration stimulation is proposed for the perception-assist and applied for elbow-joint-extension motion change. In this study, it is elucidated that the amount of elbow-joint-extension motion change can be changed with respect to the frequency change of the vibration stimulation. Furthermore, it is elucidated that the change in the human elbow-joint-extension motion can be generated soon after the vibration stimulation is provided. Based on the characteristics of motion change with respect to vibration stimulation, the proposed method controls the change of the user’s elbow-joint-extension motion by adjusting the frequency of the vibration stimulation to achieve the target motion, which is different from the user’s intended motion. The effectiveness of the proposed method toward the change in the human elbow-joint-extension motion was experimentally evaluated.
20 June 2023 in Journal of Robotics and Mechatronics
The application of vibration stimulation to muscles, via the skin surface, can generate the sensation of movement, when actually there is no motion. This phenomenon is called kinesthetic illusion. Recently, in the fields of rehabilitation and virtual-reality technology, research has been conducted to utilize kinesthetic illusions to feel body movements, when there are none. To apply kinesthetic illusions in the above fields, it is necessary to develop techniques to improve the occurrence rates of the kinesthetic illusions and shorten the latency, which is the time lag from the onset of stimulation to the occurrence of the illusion. In a previous study, the authors reported that the occurrence rate of kinesthetic illusion could be improved by simultaneously applying vibration and electrical stimulations to the antagonistic muscles. In this study, the influence of this technique on the latency of the generated kinesthetic illusion is investigated by applying a combination of vibration and electrical stimulations. Three different electrical-stimulation voltages are used in the combined stimulation to induce the kinesthetic illusion, and the latency is studied for each voltage condition and the vibration-only condition. The effects of the voltage change on latency are evaluated from a regression analysis performed using the generalized linear mixed model. The results suggest that the change in the electrical stimulation voltage can shorten the latency of kinesthetic illusion.
20 October 2024 in Journal of Robotics and Mechatronics
T-cane is a primary method used to prevent falls. Although canes effectively increase stability and reduce load, the specific position of the cane tip that maximizes these effects is not yet clear. Furthermore, the cane tip position that enhances effectiveness may also increase the burden on the user. In this study, we used the center of pressure (CoP) as an indicator of stability and shoulder joint adduction torque as an indicator of burden. In this study, we propose a cane tip position that increases the stability of the cane user, but does not increase the burden, through experiment. The experiment involved healthy young male participants. The results confirmed that the CoP increased with the cane tip position. The shoulder joint adduction torque increased with the cane tip position and then remained constant. The results suggest that the participants can walk with higher stability per load when the cane tip was positioned 30 cm in front of the right foot on the ground.
To improve motion accuracy through functional electrical stimulation (FES) of forearm muscles, feedback control laws are applied to the index finger’s metacarpophalangeal (MP) joint. This paper introduces a proxy-based super-twisting algorithm (PSTA) for precise servo control of MP joints via FES. The PSTA combines first-order sliding mode control with a second-order super-twisting algorithm, effectively preventing windup during FES saturation and ensuring robust, accurate control. An implicit Euler method minimizes numerical chattering in the digital implementation. Experiments with Arduino and volunteers confirm the algorithm’s effectiveness.