3 April 2023 in IEEE Sensors Journal
Oil film thickness is a significant index to evaluate oil spill pollution at sea surface. Laser induced fluorescence (LIF) is one of the most effective oil spill detection technologies at present. Nowadays, based on LIF detection technology, the effective evaluation of the thickness of thin oil film on the sea surface has been implemented. However, the studies on the evaluation for thick oil film on the sea surface are relatively few. Further the existing inversion algorithm for thick oil film is not applicable to the evaluation of oil film thickness under various detection angles except vertical sea surface. In view of this, a new evaluation algorithm for thick oil film based on fluorescence signal is put forward in this paper. The transport mechanism of photons in oil film medium is regarded as the basis. Simultaneously, the influence factors such as detection mode and detection angle are comprehensively taken into account in the LIF detection process. In this way, the function relationship between the fluorescence signal intensity of the oil film and its thickness is established. Afterwards, the algorithm is experimentally verified by selecting the mixture of crude oil and white oil as the experimental oil. The results show that the algorithm is suitable for evaluating the thickness for thick oil film in a certain thickness range ( that is, the fluorescence intensity of oil film is not saturated ). The effective evaluation of thick oil film on the sea at any detection angle under non-coaxial transmit-receive form and coaxial transmit-receive form can be realized by this algorithm.
21 May 2022 in Optics Communications
8 April 2020 in IEEE Access
In order to improve fitting accuracy of free-form surface, an improved method for the currently recognized NURBS free-form surface based on discrete stationary wavelet transform is proposed. Firstly, the elevation image of the free-form surface point cloud and the elevation sequence of the elevation image are obtained by using the grid method. Then, feature points of the free-form surface are extracted by the discrete stationary wavelet transform. Finally, using the extracted feature points, high accuracy NURBS free-form surface is realized. Compared with the conventional NURBS method and the NURBS method based on dual-tree complex wavelet transform, the experimental results showed that the root mean squared errors of fitting results of free-form surface were deduced 77.64% and 23.16%, respectively. Therefore, the proposed method has satisfactory fitting precision.
6 June 2022 in IEEE Sensors Journal
To meet the actual requirements of multi-phase measurement, a fiber-conductance dual-mode sensor (FCDMS) is designed and developed. The theoretical model of the FCDMS measurement field is established, and the light transmission process’s mathematical description and simulation analysis in the sensitive conical tip is carried out. Thereafter, The FCDMS simulation model is established by the ZEMAX ray-tracing method and Finite Element Method (FEM). the effects of structural parameters on sensitivity distribution are analyzed, including the electrode length, the radius of the electrode, and the cone angle of the sensitive tip. Furthermore, we studied the response characteristics of FCDMS in oil-gas-water multi-phase flow. At the same time, the temperature influence experiments and dynamic experiments validate the designed FCDMS, indicating the FCDMS enables measuring the phase holdup of oil-gas-water multi-phase flow. The developed FCDMS could realize the phase holdup measurement with the liquid flow rate range of 10-70m 3 /d, the gas flow rate range of 5-40m 3 /d and the liquid water holdup range of 50-90%.