26 June 2018 in ACS Applied Materials & Interfaces
13 May 2019 in Journal of Materials Chemistry A
All-solid-state batteries (ASSBs) based on solid-state electrolytes (SSEs) are receiving significant interest as promising candidates to overcome the limitations of conventional lithium ion batteries (LIBs), particularly safety problems. Development of operando or in situ microscopy and spectroscopy measurement techniques is crucial for real-time observations of the morphological and chemical phenomena occurring in ASSBs during charge/discharge cycles. In this study, we develop in situ Auger electron microscopy and spectroscopy techniques for real-time investigations of the various phenomena occurring in ASSBs based on pelletized argyrodite (Li6PS5Cl; LiPS) SSEs. Volume expansion/contraction of the Li metal anode owing to the injection/extraction of Li is observed during the charge/discharge process. Li migration to the Li metal anode is strongly dependent on the pressing force applied to the sample during the charge/discharge cycles. At the sample position under excessively high local pressure, a superabundant amount of Li metal migrates to the anode, and irreversible growth of Li metal is observed. In contrast, the volume expansion of the Li metal anode is negligible at the unpressurised sample position, resulting in poor capacity of the ASSBs. This result demonstrates that homogeneous pressurization of the sample is a critical factor for a stable charge/discharge process. The results provided herein can guide the development of practical ASSBs in industry, and the novel in situ measurement technique can be a useful tool for the real-time analysis of various phenomena in ASSBs.
1 December 2018 in Journal of Power Sources
28 October 2014 in Journal of Materials Chemistry C
In situ molecular distribution analysis based on photoemission spectroscopy combined with Ar gas cluster ion beam sputtering process.
18 April 2023 in Nanotechnology
Quantum dots possess exceptional optoelectronic properties, such as narrow bandwidth, controllable wavelength, and compatibility with solution-based processing. However, for efficient and stable operation in electroluminescence mode, several issues require resolution. Particularly, as device dimensions decrease, a higher electric field may be applied through next-generation quantum dot light-emitting diode (QLED) devices, which could further degrade the device. In this study, we conduct a systematic analysis of the degradation phenomena of a QLED device induced by a high electric field, using scanning probe microscopy (SPM) and transmission electron microscopy (TEM). We apply a local high electric field to the surface of a QLED device using an atomic force microscopy (AFM) tip, and we investigate changes in morphology and work function in the Kelvin probe force microscopy mode. After the SPM experiments, we perform TEM measurements on the same degraded sample area affected by the electric field of the AFM tip. The results indicate that a QLED device could be mechanically degraded by a high electric field, and work function changes significantly in degraded areas. In addition, the TEM measurements reveal that In ions migrate from the indium tin oxide (ITO) bottom electrode to the top of the QLED device. The ITO bottom electrode also deforms significantly, which could induce work function variation. The systematic approach adopted in this study can provide a suitable methodology for investigating the degradation phenomena of various optoelectronic devices.
1 June 2020 in Applied Surface Science