5 December 2019 in Macromolecular Chemistry and Physics
6 October 2014 in Applied Physics Letters
In this work, we report the replication and characterization of the compound eye of a fruit fly for imaging purpose. In the replication, soft lithography method was employed to replicate the compound eye of a fruit fly into a UV-curable polymer. The method was demonstrated to be effective and the compound eye is replicated into the polymer (NOA78) where each ommatidium has a diameter of about 30 μm and a sag height of about 7 μm. To characterize its optical property, the point spread function of the compound eye was tested and a NA of 0.386 has been obtained for the replicated polymeric ommatidium. Comparing with the NA of a real fruit fly ommatidium which was measured to be about 0.212, the replicated polymeric ommatidium has a much larger NA due to the refractive index of NOA78 is much higher than that of the material used to form the real fruit fly ommatidium. Furthermore, the replicated compound eye was used to image a photomask patterned with grating structures to test its imaging property. It is shown that the grating with a line width of 20 μm can be clearly imaged. The image of the grating formed by the replicated compound eye was shrunk by about 10 times and therefore a line width of about 2.2 μm in the image plane has been obtained, which is close to the diffraction limited resolution calculated through the measured NA. In summary, the replication method demonstrated is effective and the replicated compound eye has the great potential in optical imaging.
18 April 2016 in Organic & Biomolecular Chemistry
A highly stable heterobifunctional fluoroalkylation reagent, 1-azido-2-chloro-1,1,2-trifluoro-2-iodoethane (ACTI) has been prepared and investigated systematically.
8 July 2024 in Journal of Molecular Structure
2 November 2020 in Journal of Polymer Science
Among various two‐dimensional (2D) materials, organic 2D polymers have attracted much attention, owing to their specific properties, such as lightweight, good flexibility, adjustable structure, and high adaptability. In recent years, more and more scientists have devoted to the research on their structural design, synthesis, characterization, and potential properties. However, in contrast to traditional one‐dimensional (1D) and three‐dimensional (3D) network macromolecules, the synthesis of 2D structures presents a challenge to polymer chemists, because polymerization usually takes place in a spatially random manner in solution‐phase synthesis. In this review, we will focus on the synthesis methods of organic 2D materials, which have played a pivotal role since the beginning of the development of this field. We will highlight the representative examples according to the different types of polymers, including supramolecular organic 2D layers and covalent organic 2D polymers, and identify possible future research directions.
23 July 2019 in Journal of Polymer Science Part A: Polymer Chemistry