1 January 2019 in Sensors and Actuators A: Physical
19 September 2018 in IEEE/ASME Transactions on Mechatronics
Nanorobotic systems using piezoelectric stick-slip actuators are widely used in nanotechnology. They operate mainly in a coarse-positioning mode and a fine-positioning mode. In the first mode, the actuator performs large displacements with a maximal range of a dozen millimeters but with a low resolution. In the second mode, the displacements are of a few micrometers and below with a nanometer resolution. In order to achieve efficient automated tasks, it is often necessary to define closed-loop tracking strategies. To this end, an accurate multiscale model of the nanorobotic system is required. This paper deals with a new modeling approach to describe the dynamics of this class of systems in the time and the frequency domains for both coarse- and fine-positioning modes. We propose an augmented voltage/frequency modeling of the friction force based on a multistate elastoplastic formulation. Necessary conditions on the presliding modeling are studied to deal with the two operating modes and the motion direction. This model is combined with a nonlinear rate dependent hysteresis model. The main result and contribution of this paper is to demonstrate that a complete nanorobotic task involving closed-loop multiscale displacements can be precisely defined by simulations upstream of a real-time implementation with a mean error of 9.05%. The proposed model opens new perspectives for the definition of control strategies for complex nanorobotic tasks through simulation software tools.
1 January 2014 in International Journal of Advanced Robotic Systems
Two-fingered micromanipulation systems with an integrated force sensor are widely used in robotics to sense and control gripping forces at the micro and nano-scales. They became of primary importance for an efficient manipulation and characterization of highly deformable biomaterials and nanostructures. This paper presents a chronological overview of gripping force measurement using two-fingered micromanipulation systems. The work summarizes the major achievements in this field from the early 90s to the present, focusing in particular on the evolution of measurement technologies regarding the requirements of microrobotic applications. Measuring forces below the microNewton for the manipulation of highly deformable materials, embedding force sensors within microgrippers to increase their dexterity, and reducing the influence of noise to improve the measurement resolution are among the addressed challenges. The paper shows different examples of how these challenges have been addressed. Resolution, operating range and signal/noise ratio of gripping force sensors are reported and compared. A discussion about force measurement technologies and gripping force control is performed and future trends are highlighted.
17 June 2019 in IEEE Sensors Journal
28 July 2020 in IEEE Transactions on Control Systems Technology
This article deals with a novel hybrid control of an atomic force microscope (AFM) for the robust characterization of interaction tip/sample force regions. The hybrid structure is composed of several position and force controllers and a specific switch compensation structure. A single selected controller is online at a time, and a robust bumpless switch between different control laws is designed. The objectives are the robustness of each controller and switch compensator with respect to uncertain parameters of the AFM. The method uses discrete points in the range of uncertainties. For each operating point, the hybrid controller is designed by an eigenstructure assignment. The method is generalized by a multimodel approach considering only uncertainties defined by a worst-case analysis, thus reducing the conservatism. The order of the controller is related to the number of observers selected by the user. This offers the possibility to design a low-order controller depending on the control specifications. The experimental results demonstrate the effectiveness of the hybrid controller for a fully automated landing procedure of the AFM tip on a sample surface and for force distance curve cycle characterization. Thanks to the robustness of the control method, landing and cycles are reproducible despite actuator uncertainties, friction variation due to aging, and instrumental issues such as the real-time data acquisition.
18 May 2024 in Journal of Micro and Bio Robotics