10 June 2020 in The International Journal of Robotics Research
Whole-body control (WBC) is a generic task-oriented control method for feedback control of loco-manipulation behaviors in humanoid robots. The combination of WBC and model-based walking controllers has been widely utilized in various humanoid robots. However, to date, the WBC method has not been employed for unsupported passive-ankle dynamic locomotion. As such, in this article, we devise a new WBC, dubbed the whole-body locomotion controller (WBLC), that can achieve experimental dynamic walking on unsupported passive-ankle biped robots. A key aspect of WBLC is the relaxation of contact constraints such that the control commands produce reduced jerk when switching foot contacts. To achieve robust dynamic locomotion, we conduct an in-depth analysis of uncertainty for our dynamic walking algorithm called the time-to-velocity-reversal (TVR) planner. The uncertainty study is fundamental as it allows us to improve the control algorithms and mechanical structure of our robot to fulfill the tolerated uncertainty. In addition, we conduct extensive experimentation for: (1) unsupported dynamic balancing (i.e., in-place stepping) with a six-degree-of-freedom biped, Mercury; (2) unsupported directional walking with Mercury; (3) walking over an irregular and slippery terrain with Mercury; and 4) in-place walking with our newly designed ten-DoF viscoelastic liquid-cooled biped, DRACO. Overall, the main contributions of this work are on: (a) achieving various modalities of unsupported dynamic locomotion of passive-ankle bipeds using a WBLC controller and a TVR planner; (b) conducting an uncertainty analysis to improve the mechanical structure and the controllers of Mercury; and (c) devising a whole-body control strategy that reduces movement jerk during walking.
4 November 2016 in IEEE Transactions on Robotics
Whole-body operational space controllers (WBOSCs) are versatile and well suited for simultaneously controlling motion and force behaviors, which can enable sophisticated modes of locomotion and balance. In this paper, we formulate a WBOSC for point-foot bipeds with series-elastic actuators (SEA) and experiment with it using a teen-size SEA biped robot. Our main contributions are on devising a WBOSC strategy for point-foot bipedal robots, 2) formulating planning algorithms for achieving unsupported dynamic balancing on our point-foot biped robot and testing them using a WBOSC, and 3) formulating force feedback control of the internal forces-corresponding to the subset of contact forces that do not generate robot motions-to regulate contact interactions with the complex environment. We experimentally validate the efficacy of our new whole-body control and planning strategies via balancing over a disjointed terrain and attaining dynamic balance through continuous stepping without a mechanical support.
26 September 2018 in IEEE/ASME Transactions on Mechatronics
We design, build, and thoroughly test a new type of actuator dubbed viscoelastic liquid cooled actuator (VLCA) for robotic applications. VLCAs excel in the following five critical axes of performance: energy efficiency, torque density, impact resistance, joint position and force controllability. We first study the design objectives and choices of the VLCA to enhance the performance on the above criteria. We follow this study by an investigation on viscoelastic materials in terms of their damping, viscous and hysteresis properties as well as their long-term performance. As part of the actuator design, we devise a disturbance observer to provide high-fidelity force control for a wide range of impedance control capabilities. We proceed to design a robotic system capable to lift large payloads with high output power. In addition, we experiment with quick trajectory control while carrying moderate payloads. Finally, we perform experiments on impedance control capabilities and mechanical robustness by studying the response of the robot to impacts produced by a hammer and human induced external forces. Overall the main contribution of this work is on the invention of a viscoelastic liquid cooled actuator using elastomers with a piston-like ball screw drive for multidof robots and the thorough investigation of its robotics performance.