1 March 1995 in Circulation Research
To evaluate arterial physiopathology, complete arterial wall mechanical characterization is necessary. This study presents a model for determining the elastic response of elastin (ς E , where ς is stress), collagen (ς C ), and smooth muscle (ς SM ) fibers and viscous (ς η ) and inertial (ς M ) aortic wall behaviors. Our work assumes that the total stress developed by the wall to resist stretching is governed by the elastic modulus of elastin fibers (E E ), the elastic modulus of collagen (E C ) affected by the fraction of collagen fibers (f C ) recruited to support wall stress, and the elastic modulus of the maximally contracted vascular smooth muscle (E SM ) affected by an activation function (f A ). We constructed the constitutive equation of the aortic wall on the basis of three different hookean materials and two nonlinear functions, f A and f C : \batchmode \documentclass[fleqn,10pt,legalpaper]{article} \usepackage{amssymb} \usepackage{amsfonts} \usepackage{amsmath} \pagestyle{empty} \[{\varsigma}{=}{\varsigma}_{E}{+}{\varsigma}_{C}{+}{\varsigma}_{SM}{+}{\varsigma}_{{\eta}}{+}{\varsigma}_{M}{=}E_{E}\ {\cdot}\ ({\varepsilon}{-}{\varepsilon}_{0E}){+}E_{C}\ {\cdot}\ f_{C}\ {\cdot}\ {\varepsilon}{+}E_{SM}\ {\cdot}\ f_{A}\ {\cdot}\ {\varepsilon}\] \batchmode \documentclass[fleqn,10pt,legalpaper]{article} \usepackage{amssymb} \usepackage{amsfonts} \usepackage{amsmath} \pagestyle{empty} \[{+}{\eta}\ {\cdot}\ \frac{d{\varepsilon}}{dt}{+}M\ {\cdot}\ \frac{d^{2}{\varepsilon}}{dt^{2}}\] where ε is strain and ε 0E is strain at zero stress. Stress-strain relations in the control state and during activation of smooth muscle (phenylephrine, 5 μg · kg −1 · min −1 IV) were obtained by transient occlusions of the descending aorta and the inferior vena cava in 15 conscious dogs by using descending thoracic aortic pressure (microtransducer) and diameter (sonomicrometry) measurements. The f C was not linear with strain, and at the onset of significant collagen participation in the elastic response (break point of the stress-strain relation), 6.02±2.6% collagen fibers were recruited at 23% of stretching of the unstressed diameter. The f A exhibited a skewed unimodal curve with a maximum level of activation at 28.3±7.9% of stretching. The aortic wall dynamic behavior was modified by activation increasing viscous (η) and inertial (M) moduli from the control to active state (viscous, 3.8±1.3×10 4 to 7.8±1.1×10 4 dyne · s · cm −2 , P <.0005; inertial, 61±42 to 91±23 dyne · s 2 · cm −2 , P <.05). Finally, the purely elastic stress-strain relation was assessed by subtracting the viscous and inertial behaviors.
1 July 1995 in Hypertension
We compared the properties of common carotid and femoral arteries of 16 normotensive and 14 hypertensive men. Arterial pressure and diameter were recorded noninvasively in each vessel by tonometric and echotracking devices. The x - y composition of pressure and diameter waves provided the diameter-pressure hysteresis loop. The elastic diameter-pressure curve and wall viscosity index were deduced after hysteresis elimination. The compliance-pressure and distensibility-pressure curves were derived from the diameter-pressure curve, allowing the calculation of effective compliance and distensibility at the prevailing pressure of each subject and isobaric compliance and distensibility at the same standard pressure in all subjects. Systolic, diastolic, mean, and pulse pressures and diameters in each vessel were higher in the hypertensive than the normotensive group, except carotid pulse diameter, which did not differ. The carotid diameter-pressure, compliance-pressure, and distensibility-pressure curves did not differ between groups. In the carotid artery hypertensive patients had isobaric compliance and distensibility values similar to those of normotensive subjects, despite lower effective compliance ( P <.05) and distensibility ( P <.01). The femoral diameter-pressure curve was higher ( P <.05) and the femoral compliance-pressure and distensibility-pressure curves were lower ( P <.01) in the hypertensive than the normotensive group. Hypertensive patients had effective and isobaric femoral compliance and distensibility values lower than to those of normotensive subjects ( P <.001). In both arteries, viscosity index was higher in the hypertensive than the normotensive group ( P <.001). In hypertension, the pressure-independent alterations of geometric and elastic properties were distributed preferentially to the femoral artery, and the alteration of wall viscosity affected carotid and femoral sites in a uniform manner.
1 December 1993 in Circulation Research
Early investigators found contradictory evidence that vascular smooth muscle activation reduces the elastic modulus of the arterial wall under isotonic conditions but increases it under isometric conditions, concomitant with increased pulse-wave velocity. We examined the individual contributions of aortic constituents to the elastic modulus of the aortic wall to determine if isobaric analysis produces an accurate assessment of vascular smooth muscle activation. We used a modified Maxwell model assuming an incremental elastic modulus (Einc) composed of the elastic modulus of elastin fibers (EE), the elastic modulus of collagen fibers (EC) affected by the fraction of collagen fibers (fC) recruited to support wall stress, and the elastic modulus of the vascular smooth muscle (ESM) according to the following formula: Einc = EE+EC x fC+ESM.Einc was assessed in eight conscious dogs using descending thoracic aortic pressure (microtransducer) and diameter (sonomicrometry) measurements. Stress-strain relations in the control state and during activation of smooth muscle by continuous administration of phenylephrine (5 micrograms.kg-1 x min-1) were obtained by transient occlusions of the descending aorta and inferior vena cava. Results were as follows: EE was 4.99 +/- 1.58 x 10(6) dynes/cm2 (mean +/- SD), and EC was 965.8 +/- 399.8 x 10(6) dynes/cm2, assessed during the control state. Phenylephrine administration increased the theoretical pulse-wave velocity (Moens-Korteweg equation) from 5.25 +/- 1.03 m/s during the control state to 7.57 +/- 2.53 m/s (P < .005). Active muscle exhibited a unimodal stress-strain curve with a maximum stress of 0.949 +/- 0.57 x 10(6) dynes/cm2 at a corresponding strain value of 1.299 +/- 0.083. The maximum value observed corresponded, on the pressure-diameter curve of the active artery, to a pressure of 234.28 +/- 46.6 mm Hg and a diameter of 17.94 +/- 1.6 mm. The maximum ESM derived from the stress-strain relation of the active muscle was 8.345 +/- 7.56 x 10(6) dynes/cm2 at a strain value of 1.283 +/- 0.079. This point was located at 208.01 +/- 40.8 mm Hg and 17.73 +/- 1.41 mm on the active pressure-diameter curve. During activation of vascular smooth muscle, Einc decreased (P < .05) when plotted against internal pressure but increased (P < .05) when plotted against strain, over the operative range.(ABSTRACT TRUNCATED AT 400 WORDS)
1 June 1991 in American Journal of Physiology-Heart and Circulatory Physiology
The elastic behavior of total elastin (EE) and collagen (EC) and the recruitment of collagen fibers (FC) supporting wall stress at a given transmural pressure level were assessed in seven conscious dogs using descending thoracic aortic pressure (microtransducer) and diameter (sonomicrometer) measurements. Stress-strain relationships values calculated at control and during bolus administration of angiotensin and nitroglycerin enabled quantification of angiotensin and nitroglycerin enabled quantification of elastic moduli of elastin (EE = 4.868 +/- 1.753 x 10(6) dyn/cm2; means +/- SD) and collagen (EC = 1,306 +/- 637 x 10(6) dyn/cm2) according to a biphasic model of elastin and collagen parallel arrangement. The FC was found to be 6.1 +/- 2.6% at a pressure level of 118 +/- 16 mmHg. Values for EE and EC were similar to those reported in in vitro studies and showed scarce variability. This approach provides a quantitative evaluation of elastin and collagen moduli in conscious animals and also permits the evaluation of FC, which may be of interest in studies of connective tissue diseases involving the aortic wall.
1 November 1999 in Ultrasound in Medicine & Biology
1 March 2006 in Hypertension
Damping is the conversion of mechanical energy of a structure into thermal energy, and it is related to the material viscous behavior. To evaluate the role of damping in the common carotid artery (CCA) wall in human hypertension and the possible improvement of angiotensin-converting enzyme (ACE) inhibition, we used noninvasive CCA pressure (tonometry) and diameter (B-mode echography) waveforms in normotensive subjects (NT group; n=12) and in hypertensive patients (HT group; n=22) single-blind randomized into HT–placebo (n=10) or HT-treated (ramipril, 5 to 10 mg/d during 3 months; n=12). Vascular smooth muscle (VSM) null tonus condition was achieved from in vitro pressure and diameter waveforms (Konigsberg microtransducer and sonomicrometry) measured in explanted human CCA (n=14). Arterial wall dynamics was described by viscous (η), inertial ( M ), and compliance ( C ) parameters, mean circumferential wall stress, viscous energy dissipation (
W
D
), peak strain energy (
W
St
), damping ratio (ξ=
W
D
/
W
St
), and modeling isobaric indexes
C
Iso
and
W
St(Iso)
. The lack of VSM tonus isobarically increased wall stress and reduced η,
C
Iso
, and damping ( P <0.01). Wall stress, η, and
W
D
were greater in HT than in NT ( P <0.015) and arrived near normal in HT-treated ( P <0.032 respect to HT), with no changes in HT–placebo. Whereas
C
Iso
increased in HT-treated ( P <0.01) approaching the NT level, ξ did not vary among groups. During hypertension, because of the
W
St
increase, the arterial wall reacts increasing
W
D
to maintain ξ. ACE inhibition modulates VSM activation and vessel wall remodeling, significantly improving wall energetics and wall stress. This protective vascular action reduces extra load to the heart and maintains enhanced arterial wall damping.